Dissertation > Excellent graduate degree dissertation topics show

Structural Improvement and Experimental Study on CO2 Double Rolling Piston Expander

Author: WangWei
Tutor: MaYiTai
School: Tianjin University
Course: Engineering Thermophysics
Keywords: Natural refrigerant CO2 Double rolling piston expander Leakage loss Isentropic efficiency
CLC: TB653
Type: Master's thesis
Year: 2010
Downloads: 32
Quote: 4
Read: Download Dissertation

Abstract


The negative environmental effects of refrigerant have attracted more and more attention. The natural refrigerant CO2 should be commended and promoted because of its superior environmental protection. Expander is the fundamental measure to improve the efficiency of CO2 tanscritical cycle. Aimed at the preliminary designed CO2 double rolling piston expander, the theoretical analysis and experimental research were to identify the reasons for its low efficiency and the corresponding improvement programs were raised. At last the effect of improved was proved through experiments.Firstly the structure and movement of double rolling piston expander are introduced in general. After check and analysis of the structural size of the original expander, some key parameters of design have been recommended. We analyze the impacting factor of expansion ratio, find the middle-channel volume affect expansion ratio severely, and raise the diameter and length designed reasonably.The theories of friction and wear are introduced firstly. The model of adhesive wear most in CO2 expander is established and the key factors are analyzed. In the gas-liquid two-phase state, the oil film would be destroyed easily. We suggest that fluid lubrication fit for expander and lubricant be provided by hydrodynamic-hydrostatic pressure. The appropriate materials are selected based on different leak points of CO2 expander.The external leakage and internal leakage of the double rolling piston expander are analyzed in the paper. The external leakage can be eliminated by integration of intermediate plate and sealing ring in the end of cylinder. The end of rolling piston coated with a layer of copper can reduce the leakage gap, but also prevent adhesive wear. The piston end can also use O-ring to enhance seal, but need wearable composite rubber. A single lubricant-supplied system is design for expander, which can reduce friction and wear, while the oil film can make leak channel narrowed, and reduce the leakage loss of the expander.Make use of CO2 water-water heat pump system to complete the rolling piston expander experiments including solving leakage problems and efficiency test, and get the initial operating characteristics of the expander, the isentropic efficiency up to 31.79%. In any experimental condition, the measured expansion ratio is far less than the design level, which is considered as the main reason for low efficiency, also the focus improving direction of the next step.

Related Dissertations

  1. Study on Infiltration Recharge of Beitang Reservoir to Groundwater,TV223.4
  2. Research on CO2 Transcritical Water-water Heat Pump and Two-rolling Piston Expander,TK172
  3. Photonic crystal fiber filled photonic crystal fiber grating,TN818
  4. Study on the Oscillation of Sonic Oscillator and Application,TB651
  5. Study on the Performance of Intersection Damp Gas Wave Refrigerator,TB651
  6. Pressure switch refrigerator Structure Optimization,TB651
  7. Study on Leakage Loss and Utilization of Potassium in Purple Soil,S511
  8. Theoretical and Experimental Investigation on Quasi-3-D Photonic Crystal Waveguide,TN252
  9. CO_2 the working substance heat pump water heater tank electronic control system,TB65
  10. The base circle Involute scroll compressor scroll geometric parameters to optimize the design of,TH45
  11. Study on the Rule of Nitrogen Loss and Reducing Fertilization Technology in Water Bamboo Fields,S645.2
  12. Incidence Efficiency Loss and Exhaust Gas Reverse Flow Study of Pressure Exchanging Refrigerator,TB651
  13. Effects of Manure Types and Application Rates on Soil Nitrogen Fractions and Nitrogen Losses of Farmland,S158
  14. Structural Optimization Study of Wave Rotor of External-Circulation Dissipative Gas Wave Refrigerator,TB651
  15. Gas wave ejector performance parameters of experimental study,TE937
  16. Research on Propagation Characteristics of Index-guiding Terahertz Photonic Crystal Fibers by the Finite Element Method,TN252
  17. The Selection of Work Fluid and the Numerical Simulation of Turbo-expander Used in Organic Rankine Cycle System,TB653
  18. The Research on Sequential Modeling, Reverse Modeling and Five-axis CNC Machining Technology for Turbo-expander Impeller,TB653
  19. Simulation and Visual Experimental Research on the Expansion Process of CO2,TB653
  20. Design of Supercharged Turbo Expander and Numerical Simulation of Supercharger,TB653

CLC: > Industrial Technology > General industrial technology > Refrigeration Engineering > Refrigeration machinery and equipment > Expander
© 2012 www.DissertationTopic.Net  Mobile