Dissertation > Excellent graduate degree dissertation topics show

Solidification of Al-Ge Alloy under High Pressure

Author: ZhaoHaiLi
Tutor: XuRui
School: Yanshan University
Course: Materials Science
Keywords: solidification under high pressure the Al-Ge alloy microstructure eutectic point eutectic phase diagram
CLC: TG131
Type: Master's thesis
Year: 2005
Downloads: 167
Quote: 8
Read: Download Dissertation

Abstract


In this thesis, based on deeply understanding of current investigation of high pressure material science on the world, the samples of Al-Ge alloys have been prepared under high pressure. And then the solidified microstructures of the samples have been observed. The aim is to research the effects of high pressure on the phase constitution and microstructure of the alloys solidified under different pressure. First, the Al-Ge alloys, which are the content (wt.%) of Ge is 30%, 53%, 60%, and 70% respectively, were prepared by multifunctional argon-protected alloy melting furnace. Then the Al-Ge alloy solidified under superhigh pressure (4.0 GPa、5.0 GPa and 6.0 GPa) were obtained by Cubic High Pressure Apparatus (CS-1B). By observing the microstructure of the alloy, the effect of pressure were analysed. The phase constitution of the Al-60 wt%Ge alloy solidified under high pressure were characterized by X-ray diffraction(XRD). The optical microscope, SEM and TEM were used for the observation of the alloy morphology solidified under high pressure. The result of XRD shows that there is found the no new phase exists in the alloys under high pressure, compared with the microstructure solidified under normal pressure. The eutectic microstructure of Al-Ge alloys solidified under normal pressure is presented as coarse arborization like fishbone. The microstructures of prime β phases in the hypereutectic alloys change with increasing the germanium content. A amount of primary α(Al) phase is observed in the Al-60 wt.%Ge alloy solidified under high pressure, which suggests that eutectic point moving to the Ge direction with an increase of pressure in Al-Ge alloy phase diagram. So the hypereutectic microstructure of Al-Ge alloy under normal pressure transfers to hypoeutectic microstructure when it solidifies under high pressure. The fishbone microstructures of eutectic solidified under high pressure are disappeared. Under high pressure, the growth mechanism of Ge are changed under the effect of pressure and it tends to be non-faceted growth way.

Related Dissertations

  1. Reactive Hot-Pressing and Mechanical Properties of （ZrB2-ZrO2）/BN Composites,TB332
  2. Microstructure and Mechanical Properties of Mg-Zn-Y-Zr Alloys,TG146.22
  3. Investigation on Microstructure and Properties of Cadmium-Free Silver-Based Intermediate Temperature Filler Metals,TG425.2
  4. Research on Technology and Mechanism of Joining Cemented Carbide to Carbon Steel,TG454
  5. The Investigations on the Characteristics and Mechanism of NIR Emission from Bi-doped Silicophosphate Glasses,TQ171.1
  6. Preliminary Study on Salt-Tolerant Mechanism of the New Pennisetum Purpereum Schumach Variety-Sumu No.2,S543.9
  7. Study on the Fine Structure of Intestine and Intestinal Mucosal Barrier in Zebrfish (Brachydanio Rerio),Q95-33
  8. Study on Characteristics of Morphology Anatomy and Physio-Biochemistry of Two Ecotype Varieties Cucumber Leggy Seedilings,S642.2
  9. Study on the Mechanism of Heat-Induced Gelation of Myofibrillar Proteins,TS251.1
  10. Studies on the Aggregation and Microstructure of Imidazolium Ionic Liquids in Solutions,O645.1
  11. Studies of Luminescence Characteristics of Eu3+-doped Rare Earth Borates REBaB9O16 （RE=rare Earth Ions and Y）,O627.3
  12. The Research on Extrusion Parameters Through the Plate Billet of Magnesium Alloy,TG379
  13. Study on Stock Price Behavior Around Periodical Reports Based on Asymmetric Information,F832.51
  14. Research on Processings and Microstructure and Properties of HRB400MPa,TG335
  15. Study of Performance of Cordierite Combined Mullite Products,TQ175.71
  16. Effect of Adding ZrO 2 Nanopowder on Microstructure and Mechanical Properties of Carbon Steel,TB383.1
  17. The Broussonetia papyrifera fiber structure and properties of microwave - assisted the degumming process parameters optimization,TS123
  18. Studies on the Influence of Rare Earth Ce on Microstructure and Properties of Huge Heat Input SAW Seam Metal,TG445
  19. Hexagonal boron nitride micro- structure and adsorption properties of,TB383.3
  20. Rolled Mg-Zn-Ce-Zr (Mn) alloy microstructure and mechanical properties of,TG339
  21. Simulated lunar ambient temperature magnesium alloy microstructure and mechanical properties of,TG146.22

CLC: > Industrial Technology > Metallurgy and Metal Craft > Metallurgy and Heat Treatment > The alloy learn with a variety of properties of alloys > Alloy theory
© 2012 www.DissertationTopic.Net  Mobile