Dissertation > Excellent graduate degree dissertation topics show

Ceramic reinforced concrete continuous beam plastic Experimental Study on Moment Redistribution

Author: ZhangGaoYong
Tutor: LuChunYang
School: Guangxi University
Course: Structural Engineering
Keywords: Ceramic concrete Continuous beam Plastic Redistribution Amplitude coefficient
CLC: TU528
Type: Master's thesis
Year: 2005
Downloads: 90
Quote: 2
Read: Download Dissertation

Abstract


Lightweight aggregate concrete has light weight, good thermal performance, and many other advantages of new building materials, it has been widely used in foreign countries, and achieved good economic and technical benefits. In our country, as the research and application of the structural is also relatively backward. This experiment adopts LC20 LC30 and the strength of the two kinds of test beam, respectively, respectively, in accordance with 15%, 20%, 25% of the amplitude modulation coefficient to calculate reinforcement. Use two span continuous beam, such as grading load and concentrated load mode, through the determination of bearing reaction force, deflection and stress of reinforced concrete strain of the section, and the main draw the following conclusions: 1, ceramsite concrete continuous beam can achieve full internal force redistribution of the amplitude modulation coefficient to determine the main controlling crack width limit conditions, the upper limit amplitude modulation coefficient is 20%. 2, ceramsite concrete in front of the crack material performance conforms to the law of elasticity, according to the elastic theory analysis and practical results better.

Related Dissertations

  1. Experimental and theoretical analysis of the reinforcement and restoration widens box girder,U441
  2. Simulation Analysis of Large Span Continuous Bridges of Railway,U448.215
  3. Overweight Vehicle and Long Continuous Girder Bridge of Assembling Pushing New Technology,U445.462
  4. Railway continuous beam arch combination structural design of key technologies,U448.13
  5. Research on Pseudo-dynamic Test Method Under Multi-dimensional and Multi-support Seismic Excitations,U441.3
  6. Research on Design and Construction of Taolaizhao-Songhua a Lake Bridge,U442.5
  7. Investigation of Construction Technique for Haizhigou Bridge in Houyue Railway,U445.4
  8. Analysis of theory and Tests Study of Damatic Characteristic of the Main Bridge of JiLin Jiuzhan Songhuajiang Highway Bridge,U441.5
  9. Construction Monitor of Taolaizhao Songhuajiang rigid—Continuous Bridge,U445.1
  10. Time-Dependent Reliability Assessment and Life Prediction of Continuous Concrete Girder Bridges,U448.33
  11. Experimental Research on Mechanic Performance of UPC Continuous Beams Strengthened with CFRP Laminate,TU378.2
  12. Study on Structural Design of Asphalt Concrete Pavement for the Continuous Bridge,U443.33
  13. Study on CAD Tendon Arrangement of Pestressed Concrete Continuous Beam Bridge,U442.5
  14. The mountain highway consecutive Liang Qiaozhi magnetorheological damper damping control study,U442.55
  15. Program Design and Research on Mechanical Property of Skew Angle Incremetal Launching Continous Bridge,U445.462
  16. Based on Fuzzy Theory after a Continuous Girder Bridge Reliability Assessment,U445.72
  17. Research on the Key Technology in Construction Control of Continuous Beam Bridge in High-speed Railway,U445.4
  18. Constant Load State Analysis of Rigid Support Continuous Beam Bridge,U445.4
  19. Falling beam bridge girder minimum length of lap preliminary study,U442.55
  20. Steel - concrete composite continuous beam bridge structure design method,U448.215

CLC: > Industrial Technology > Building Science > Building Materials > Non-metallic materials > Concrete and concrete products
© 2012 www.DissertationTopic.Net  Mobile