Dissertation > Excellent graduate degree dissertation topics show

Study on the Dynamic Properties of the Megaframe-Tube Structure

Author: LinZuo
Tutor: DengZhiHeng
School: Guangxi University
Course: Structural Engineering
Keywords: megaframe-tube dynamic property finite element method time-history analyses parameters analyses
CLC: TU973
Type: Master's thesis
Year: 2005
Downloads: 94
Quote: 1
Read: Download Dissertation

Abstract


Based on the finite element theories, this thesis does a systematical research on the megaframe-tube structure, and the global objective is the assessment of the seismic usefulness of this kind of structure.Firstly, conceptual analysis was carried out on the megaframe-tube structure, and its model for finite element analysis was identified. Compared with the traditional frame-tube structure, modal analysis was conducted on the model to evaluate its natural vibration properties of global structure. Then, spectrum method and dynamic time history analysis was performed to assess the dynamic properties of the megaframe-tube structure under slight earthquake. Considered the nonlinear factors of the structure, elasto-plastic seismic behavior in rare seism was studied in this thesis. Finally, design parameters which influence the mechanical properties of the structure were analyzed.The conclusion of this paper is reached:1. The dynamic properties for the megaframe-tube and the traditional frame-tube under slight earthquake are similar. There is a decrease tendency in the interstory drift figures where megabeams are set. The figures of floor shear force and floor moment are similar to those of the frame-tube structure. The ratio of the seismic force of the megacolumns is larger than that of the columns of the frame-tube structure.2. Under rare seism, there is also a decrease tendency in the interstory drift figure where megabeams are set, but totally, the collapse of the structure can be prevented in the severe earthquake. Under the 7 intensity scale earthquake, there is no plastic hinges appeared in the megacolumns, and few plastic hingesappeared in the secondary frame. In the regions which earthquake intensity scale is 7, for megaframe-tube structure, the structure could be able to (a) resist minor earthquake without damage, (b) resist moderate earthquakes without structural damage, but with some non-structural damage, (c) resist major earthquakes of severity equal to the strongest that could be experienced in the area, without collapse but with some structural as well as non-structural damage.3. Converting the sections of megacolumns, megabeams, secondary frames and tubes can influence the top floor displacement, velocity, acceleration and base seismic force. Enlarging the sections of megabeams, secondary frames and tubes can control the maximum interstory drift. Converting the measurements of megacolumns and tubes can adjust the propagation of the seismic force and reduce the plastic hinges of the outer frames.

Related Dissertations

  1. Research on the Structure and Characteristics of Permanent Magnetic Coupling,TH139
  2. Simulation Analysis on Temperature Stress of RCC Arch Dam and Its Construction Joints Design Research,TV642.2
  3. The Relation between Fuzzy Logic Guidance Law and Homing Quality,TJ765
  4. Stability Analysis of Roller Compacted Concrete Gravity Dam Based on Time-history Method,TV642.2
  5. Research on Intelligent Aerial Bomb for Forest Fire Fighting,S762
  6. The Band Structure in 2D Resonant Phononic Crystal,O735
  7. Research on Sensing with High Birefringent Photonic Crystal Fiber,TP212
  8. Numerical and Experimental Studies for Multi-Cracks of Asphalt Pavement with Semi-Rigid Basement Asphalt,U416.217
  9. Study on the Influence of Various Defects on the Characteristics of Infrared Photonic Crystal Fiber,TN253
  10. Applications of Vector Finite Element Method to Simulate Logging While Drilling Resistivity Tools,P631.83
  11. Uniform deformation laminate interlaminar stresses Numerical simulation and high-temperature creep behavior of 40Cr steel,TB33
  12. Scrap copper smelting furnace temperature measurement method,TF811
  13. Space hyperspectral imager Compensation focusing optical system of pre-,TH743
  14. Study of Composite Drive Shaft for an Automobile,U465.6
  15. Vehicle-mounted snubbing workover rig derrick Design and analysis,TE935
  16. Particle reinforced copper matrix composites mechanical behavior of finite element analysis,TB331
  17. Finite element analysis of gear transmission machine and Kinetics,TH132.41
  18. Large opening pressure vessel structural finite element analysis and strength design,TH49
  19. Composite cage rotor induction motor starting performance of the design and research,TM343
  20. More rarely slot reactance permanent magnet synchronous motor parameter calculation and research,TM341
  21. Magnetic induction tomography forward problem and reconstruction algorithm,TP391.41

CLC: > Industrial Technology > Building Science > High-rise buildings > Tall Building Structures
© 2012 www.DissertationTopic.Net  Mobile