Dissertation > Excellent graduate degree dissertation topics show

Wheell Speed Measurement & Electronic Throttle Control for Traction Control System

Author: FuZuo
Tutor: GuoKongHui
School: Jilin University
Course: Vehicle Engineering
Keywords: Traction Control System (TCS) Wheel speed identification Electronic Throttle Control (ETC) System Identification Dynamic characteristic Control logic
CLC: U463
Type: Master's thesis
Year: 2005
Downloads: 464
Quote: 6
Read: Download Dissertation

Abstract


Traction control as an active safety technologies to improve vehicle safety by controlling the rate of the drive wheel slip to improve traction when the vehicle is driven by and driving stability . The traction control system is the mid - eighties , the international development of new active safety control system . In China, the car traction control system has entered the stage of promotion , research on traction control is still in its infancy , therefore , to carry out research in this area has important practical significance and broad application prospects . Around the theme of self-developed car traction control system , traction control system , sensors, actuators , and control logic research : the development of the wheel speed identification system ; electronic throttle control study ; consider implementing characteristics of traction control logic simulation , and analysis of the dynamic characteristics of the actuator control effect .

Related Dissertations

  1. Research on the Control and Remedy of Nanopositioning Stage Drived by Piezo Material Lead Zirconate Titanate,TP273
  2. Stability Analysis of Roller Compacted Concrete Gravity Dam Based on Time-history Method,TV642.2
  3. Identification and Robustness Analysis of Nonlinear Hybrid Dynamical System Concerning Glycerol Transport Mechanism,TQ223.162
  4. Research of Adaptive Active Noise Control Based on Neural Network,TP183
  5. The Study on the Method of Structural Dynamic Modeling and Analysis of Wind Power Transformers,TM41
  6. Downhole drilling motor stator helical surface milling technology,TG54
  7. Keyway milling of ultrafine pole,TG54
  8. 126kV Vacuum Circuit Breaker Dynamic Simulation and Design,TM561.2
  9. VSCF doubly-fed wind turbine maximum power point tracking control,TM614
  10. Dynamic characteristics of the PIN diode Computer Simulation Analysis and Research,TN312.4
  11. Complex process control system design and control strategy,TP273
  12. Milling machine beams and hydraulic ram automatic balancing systems research,TG542
  13. Identification of the civil justice system in our country Reflection and Reconstruction,D918.9
  14. 2D digital valve and the static and dynamic characteristics of nonlinear compensation deadband,TH137.52
  15. Resonant vibration load fatigue testing system model predictive control technology,TH87
  16. Macro- micro dual-drive platform for the realization of high-precision two-dimensional motion,TH703
  17. Model-based rapid test method equipment,TJ06
  18. Dynamic Characteristic and Hardware-in-loop Simulation Research for Automobile Electric Power Steering System,U463.4
  19. Research on the Dynamic Characteristics of High Speed Solenoid Valve for ABS,U463.526
  20. Fatigue Life Analysis on Elastic Thin-Wall Component of Harmonic Gear Drive,TH132.46
  21. Experimental Modal Analysis of MGK7350 Surface Grinding Machine and Structure Improvement of Grinding Head,TG582

CLC: > Transportation > Road transport > Automotive Engineering > Automotive structural components
© 2012 www.DissertationTopic.Net  Mobile