Dissertation > Excellent graduate degree dissertation topics show

Design and Implementation of Sensor’s Preparation System Based on DSP

Author: HouWenXue
Tutor: GuoShuXu
School: Jilin University
Course: Circuits and Systems
Keywords: Sensor preparation system Stepper motor DSP
CLC: TP212
Type: Master's thesis
Year: 2005
Downloads: 306
Quote: 5
Read: Download Dissertation

Abstract


This paper describes the preparation of a DSP-based sensor system implementation methods and research significance. First, CNC system development history, status quo and development trends and prospects of proposed research in the field of DSP applications in the control of great practical significance. Then focuses on the preparation of the sensor system design requirements and sensor preparation step , as a basis for the design of the mechanical system and the corresponding parts of control systems . Mechanical systems are mainly based on pulse equivalent , to determine the transmission ratio of the mechanical system and transmission mode, the computing system equivalent moment of inertia and motor load torque , and ultimately select the appropriate stepper motor and drive , with ball screw and guide the implementation. Control systems , discussed in detail the structural characteristics and TMS320LF2407 stepper motor DSP control method , using C language and assembly language combination , completed the motor drive , key control , PWM generation , power protection , level shifting , etc. cell design and debug , and eventually burned into the DSP program Flash, thus completing the preparation of this sensor system implementation . The main results of this thesis is to achieve a real-time , accurate , efficient, safe, modern sensor production line , not only effectively simplify the hardware design , there is a strong expansion. For the development of numerical control system can provide a reference model .

Related Dissertations

  1. Design of Electronicalcontrol System for Electronic Jacquard Knitting Machine,TS183
  2. Research on the Integrated Grating Subdividing Digital Display Device Based on DSP,TH822
  3. Study on Two Dimensional of Auto-Collimator Based on DSP,TH741.14
  4. Study on the Control System for Automatic Aiming of HWIL Pitching Mechanism,TJ303
  5. Research on Synchronous Motor Excitation Control System,TM341
  6. The AES Algorithm and Its Implementation in DSP,TN918.1
  7. The Design of a DSP-Based Robot Speech Command Recgnition System,TN912.34
  8. Research on Signal Receiving System of Phase Laser Range Finder,TN249
  9. Study on Implementation Technology of Channel Estimation in OFDM System Based on DSP,TN919.3
  10. Optimizing and Realising Research on Vedio Compression in TV Guidance System,TN919.81
  11. Voice Signal De-noise Base on Wavelet and Arithmetic Implement with DSP,TN912.3
  12. Research on Image Compression and Implementation Using TMS320C6713 Based on SPIHT Algorithm,TP391.41
  13. A Study on the Technology of the Infrared Image Matching,TP391.41
  14. Development of 3-Dimensional Scanning Probe Data Acquisition System Based on DSP,TP274.2
  15. Development of Vxibus Common Interface Module Based on DSP,TP274
  16. Research of Acoustic Signal Acquisition System Based on DSP,TP274.2
  17. The Automatic Variable Fertilization System Based on the Steeper Motor,S224.2
  18. Research of DSP-based Real-time Demodulation Method of One-frequency Laser Interferometer,TN911.3
  19. Laser alignment system posture measuring device developed,TN24
  20. ATV vehicle weapon control system,TP273
  21. Research on DSP-based Auto-focusing Systems,TP391.41

CLC: > Industrial Technology > Automation technology,computer technology > Automation technology and equipment > Automation components,parts > Transmitter ( converter),the sensor
© 2012 www.DissertationTopic.Net  Mobile