Dissertation > Excellent graduate degree dissertation topics show

Research on Process Automated Planning for Parts of Injection Mold Based on Pro/ENGINEER

Author: LiuZhenYu
Tutor: WangYun；HuShuGen
School: Zhejiang University
Course: Mechanical Design and Theory
Keywords: injection-mould feature conversion machining feature inter-feature constraints Genetic Algorithm process routine decision
CLC: TQ320.5
Type: Master's thesis
Year: 2005
Downloads: 274
Quote: 4
Read: Download Dissertation

Abstract


With the popularization of CAD/CAM in die & mold industry, to employ CAPP in changing the traditional process plan and making a real integration of CAD/CAM is now becoming a research focus in die & mould technology.In order to improve the consistency of information flow from injection mould design to production and to enhance the automation of process plan, the author made a research on two key technologies of injection mould CAPP: information retrieval from CAD and process routine decision. The results are listed below:Firstly the author analyzed the characteristic method of part modeling in Pro/E’s mould-design module. Based on the analysis results, the machining features of injection mould parts were classified and the pre-definition of the machining features were given. A hybrid method, which combines automatic feature conversion with inter-active definition of feature, was presented and implemented. The method can retrieve the information of machining feature effectively thus to solve the problem of CAD/CAPP integration.Follow researches have been made on the bottleneck of CAPP, the process routine decision of part:Aimed at the limitation of characterization of parts information for process plan using single-feature representation method, the concept of inter-feature constraints was presented. The basic types of inter-feature constraints were classified and the effects of each type on process routine decision were discussed in detail.An algorithm based on constraints-matching was presented to solve the problem of process routine decision. In this algorithm, the constraints of general machining process are represented by a standard process routine and the inter-feature constraints are considered as a punish factor. The algorithm was implemented using Genetic Algorithm and the result was tested.Finally, on the basis of theories mentioned above, an injection molding CAPP prototype system was completed and the main problems of CAPP: information retrieval from CAD and process routine decision was accomplished in the system.The characteristics and innovations of this paper are: firstly, based on the detail classification of machining features of injection mould parts, a hybrid method, which can retrieve the machining feature information on Pro/E’s mold-design module, was given. Secondly, the concept of inter-feature constraints was presented to overcome the limitation of parts representation using single-feature method for process plan. Thirdly, an algorithm based on constraints-matching was presented. In this algorithm,

Related Dissertations

  1. Development of the Platform for Compressor Optimization Design and Aerodynamic Optimization Design in the Transonic Compressor,TH45
  2. The Application of Fuzzy Comprehensive Evaluation Based on Genetic Algorithm in Vocational Evaluation of Classroom Teaching,G712
  3. Study on Taste Characteristic of Taste Peptide Enzymatic Production from Oyster Base on A Neural Network Method,TS254.4
  4. Design and Realization of the Magnetic Antenna in MW and SW Bands Based on Genetic Algorithm,TN820
  5. Citrus Image Segmentation Based on Genetic Algorithm,TP391.41
  6. Research of Scheduling Algorithm Based on Hybrid Adaptive Genetic Algorithm in Computing Grid,TP393.09
  7. Public Transport Optimal Dispatching Based on the Genetic-Newton Algorithm,TP18
  8. BP network optimization based on genetic algorithm optimization of the biodiesel process,TE667
  9. The Research on Texture Synthesis Technology from Cloud Theory & Been Evolution Genetic Algorithm,TP391.41
  10. Research on Clustering Algorithm Based on Genetic Algorithm and Rough Set Theory,TP18
  11. Mining resources based on genetic algorithm optimization model of,O224
  12. The magnetorheological damper mechanical properties and Gun Recoil,TB535.1
  13. Optimization Study on Gating System and Molding Process Parameters of Injection Mold Based on Simulation,TQ320.662
  14. Research on the Milling Performance and Parameters Optimization with Large Parts of Heavy Machine,TG54
  15. Research of Adaptive Active Noise Control Based on Neural Network,TP183
  16. The Design and Implementation of Email Analysis and Forensies System,D918.2
  17. Sdesign and Implementation of Course Scheduling Management System,TP311.52
  18. Sentence Similarity Computing Research and Application of Intelligent Question Answering System,TP391.1
  19. The Study and Development of Production Planning and Management System for Small and Medium Discrete Enterprises,TP311.52
  20. Research on Feature Extraction, Selection and Classification Algorithms for Pulmonary CAD,TP391.41
  21. Research on Oranically-Structured of Expanding Large Scale Systems Based on Parameter Optimization,TP273

CLC: > Industrial Technology > Chemical Industry > Synthetic resins and plastics industry > General issues > Machinery and equipment
© 2012 www.DissertationTopic.Net  Mobile