Dissertation > Excellent graduate degree dissertation topics show

SUVs torque converter flow field analysis and experimental study Flow Field

Author: CuiZhiJun
Tutor: MaWenXing
School: Jilin University
Course: Mechanical Design and Theory
Keywords: Torque converter ANSYS LDA Flow field
CLC: U469.3
Type: Master's thesis
Year: 2005
Downloads: 118
Quote: 1
Read: Download Dissertation

Abstract


In this paper, \\The main research work in the following areas : 1. Using the measured torque converter UG solid modeling , and three out of the impeller flow channel to establish flow channel geometry. (2) will establish a good flow channel geometry into ANSYS software for three-dimensional flow field inside the torque converter numerical calculation , and the results were analyzed. Finally the problems, propose solutions. 3 with a laser Doppler velocimetry (LDA) on the measured torque converter technology turns tract conduction velocity field testing, and the experimental methods , procedures, experiments should pay attention to the problems and prone to problems in detail instructions. 4 pairs of guide rollers internal flow field numerical results for vector processing, so that we can be more intuitive understanding of the guide wheel velocity distribution of the flow field , and were compared with the experimental results .

Related Dissertations

  1. Analysis and Study of Abutment Stability in Concrete High Arch Dam by Three-Dimensional Nonlinear Finite Element Method,TV642.4
  2. The Effect of Current Density and Electric Field on Ni and Its Alloy Electrodeposition for Copper Crystallizer,TQ153.2
  3. Broken walnut shell force testing and virtual prototype design of the main components of walnut sheller,S226.4
  4. The Effect of Frequencycontron on Flow Fields Environment in Bulk Curing Barn and Quality of Flue Cured Tobacco,S572
  5. Research on a Fire-fighting Shell for Towers,TU892
  6. On the Simulant Research of the Pneumatic Cleaning Mechanism of Mini-combine Harvester,S225.3
  7. Bearing Capacity of Cast-in-place Piles in the Karst Region of Yichun, Jiangxi,U213.1
  8. Parametric Design of Flow Channels and Analysis of the Flow Field,TP391.72
  9. Structure Analysis and Optimization Design for 150 Tons Flat-Top Crane,TH213.3
  10. The Surrounding Rock Monitoring and Finite Element Simulation of Subway Tunnel,U455.43
  11. Numerical Simulation of Displacement Ventilation’s Influence on Air Quality Indoor,TU834
  12. Theoretical Study and Simulation of Hydrocyclone Separator,TH237.5
  13. Numerical Simulation Research on Optimal Milli-second Delay Time with Many Free Surfaces Hole by Hole Blast,TD235
  14. Research of FBAR Temperature Sensor,TP212.11
  15. The Study on the Influnce of Sub-splits Wire’s AC Corona Characristics under Different Climatic and Environmental Conditions,TM851
  16. Three-dimensional Thermal Simulation and Structure Design of Phase Change Access Random Memory,TP333.8
  17. Welding Research and Application of sump pumps based on the finite element analysis software,TG457.2
  18. Numerical Analysis of the Heat-Flow Coupling for Rotor of Supercritical Steam Turbine,TK261
  19. Study on Unsteady Flow Caused by Non-axisymmetric Tip-clearance in Turbine,TK261
  20. Stainless steel fuel cell bipolar plate and its experimental and simulation,TM911.4
  21. Fabrication of Microscale Ordered-reinforced Composite and Its Mechanical Characterization,TB33

CLC: > Transportation > Road transport > Automotive Engineering > A variety of automotive > Off-road car,jeep
© 2012 www.DissertationTopic.Net  Mobile