Dissertation > Excellent graduate degree dissertation topics show
Enhance machine gating parameters test methods
Author: ZhangMei
Tutor: LiJingZhao
School: Anhui University of Technology
Course: Applied Computer Technology
Keywords: hoist braking system brake torque the time of idle motion DSP PC
CLC: TD63
Type: Master's thesis
Year: 2005
Downloads: 137
Quote: 2
Read: Download Dissertation
Abstract
|
This article advances a new method through analyzing the braking system of the mine hoist and the available testing methods of parameters. This method can be used to test the parameters of braking system by means of turning off power, applying the brake, detecting the distance and the hodograph of run after it, and basing on the effect of applying the brake. The parameters can be tested and displayed by using the system consisting of PC and TMS320F240 DSP produced by TI company.At first, the article introduces the method to test the equivalent mass, the static moment of resistance, and the braking deceleration of the brake system and to examine the speed and the force of the hoisting system. According to the detecting method that the author put forwards, the parameters such as the brake torque, the time of idle motion, the brake distance and so on can be obtained. These parameters are tested and calculated by TMS320F240.Besides, the article analyzes the Quadrature Encoder Pulse (QEP) Circuit of Event Manager Module (EV), Serial Communications Interface (SCI) and I/O which are used to realize the above ideas, and gives the software flow of calculating the parameters of braking system.Meanwhile, it introduces the rotary encoder and its interface circuit to test the speed, LEM and its interface circuit to test the electric current, the communications interface circuit of DSP’ s UART and PC’ s RS232C, and so forth.The device can detect the system parameters of the hoist such as velocity diagram, force diagram, etc. Moreover when the hoist operates normally, it can alarm when it overspeeds at decelerating section.To display the parameters of braking system and hodograph ect on the screen through graph and digital, the subsystem DSP sends the data to PC which is Programmed by VB.
|
Related Dissertations
- Design of Electronicalcontrol System for Electronic Jacquard Knitting Machine,TS183
- Research on the Integrated Grating Subdividing Digital Display Device Based on DSP,TH822
- Study on Two Dimensional of Auto-Collimator Based on DSP,TH741.14
- Study on the Control System for Automatic Aiming of HWIL Pitching Mechanism,TJ303
- Research on Synchronous Motor Excitation Control System,TM341
- The AES Algorithm and Its Implementation in DSP,TN918.1
- The Design of a DSP-Based Robot Speech Command Recgnition System,TN912.34
- Research on Signal Receiving System of Phase Laser Range Finder,TN249
- Study on Implementation Technology of Channel Estimation in OFDM System Based on DSP,TN919.3
- Optimizing and Realising Research on Vedio Compression in TV Guidance System,TN919.81
- Voice Signal De-noise Base on Wavelet and Arithmetic Implement with DSP,TN912.3
- Research on Image Compression and Implementation Using TMS320C6713 Based on SPIHT Algorithm,TP391.41
- A Study on the Technology of the Infrared Image Matching,TP391.41
- Development of 3-Dimensional Scanning Probe Data Acquisition System Based on DSP,TP274.2
- Development of Vxibus Common Interface Module Based on DSP,TP274
- Research of Acoustic Signal Acquisition System Based on DSP,TP274.2
- Research of DSP-based Real-time Demodulation Method of One-frequency Laser Interferometer,TN911.3
- ECG Detection Analyzer Based on Windows xp Embedded System,R197.39
- Laser alignment system posture measuring device developed,TN24
- Research of Three-Phase Four-Wire Active Power Filter Based on Dual DSP,TN713.8
- ATV vehicle weapon control system,TP273
CLC: > Industrial Technology > Mining Engineering > Mine electrician > Electrical equipment and automation of mining machinery
© 2012 www.DissertationTopic.Net Mobile
|