Dissertation > Excellent graduate degree dissertation topics show

Optimum Research on Runner System in Bi-color Injection Mold Based on Genetic Algorithm and Moldflow

Author: LiGang
Tutor: WangBo
School: Jiangsu University of Science and Technology
Course: Mechanical Manufacturing and Automation
Keywords: bicolor injection molding runner system genetic algorithm weld-line
CLC: TQ320.52
Type: Master's thesis
Year: 2011
Downloads: 88
Quote: 0
Read: Download Dissertation

Abstract


The flow state of molten plastic in the cavity is the major factor which can influence the final quality of product during the process of injection molding, and the runner system is used to transmit the molten plastic, so whether the runner system is reasonable or not will effect flow state of the fusant directly. Usually, designers determine runner system by their experiment, and adjust the dimension of gate and runner by die trial and die repairing constantly to find the best plan. But it’s really difficult to get precise dimension by experiment when the product has complex shape and high exterior quality requirement.Numerical simulation is combined with the genetic algorithm on account of the particularity of up-shell of a digital media in bicolor injection molding, the genetic algorithm is used as a global regulation search tool while testing the correctness and validity of the genetic algorithm progam by using a test function firstly and searching best parameters of runner system based on AMI software and finally obtaining the optimum process with the requirement of weld-line position, warpage, and volume.Firstly, Moldflow analyse is executed in this article, and get some failure parameters such as weldline, warpage of product and runner system parameters. Then, set a model for optimum of parameter above including elimilating weldline, decreasing warpage and runner position optimum. Finally, make a comparation between optimum result and original design, certify that this research is superior and feasible.

Related Dissertations

  1. Development of the Platform for Compressor Optimization Design and Aerodynamic Optimization Design in the Transonic Compressor,TH45
  2. The Research on Texture Synthesis Technology from Cloud Theory & Been Evolution Genetic Algorithm,TP391.41
  3. Mining resources based on genetic algorithm optimization model of,O224
  4. The Control Design of the AS/RS Based on the Embedded Motion Controller,TP273.5
  5. The Research of Intelligent Car Path Planning Based on the Genetic Algorithm,TP242
  6. Intelligent Vehicle Scheduling Model Research and Application in Logistic Distribution,O242.1
  7. Research on the Problem of Multi-objective Flexible Job Shop Scheduling Optimization,O224
  8. Sentence Similarity Computing Research and Application of Intelligent Question Answering System,TP391.1
  9. \,TP311.52
  10. Research on the Control Algorithm for Hydraulic APC of An Experimental Rolling Mill,TP273
  11. The Development and Application of Synchronous Simulation System for Automobile Panels’ Forming,TG385.9
  12. Research on Resource Conflict and Optimal Allocation in Multi-project Management,F205;F224
  13. Study on Process Layout Optimization Method Based on Shape and Form of Basic Units,F224
  14. Main Stream Temperature Control for Ultra-supercritical Units Based on Genetic Algorithm,TP273
  15. The Study of Light and Water-Energy Co-Generation of Complex,TM61
  16. Research on Hierarchical Voltage and Reactive Power Control of Regional Power Grid,TM714.3
  17. Study on Model and Algorithm of Blood Emergency Scheduling Optimization,O224
  18. Design and Implementation in Courses Dispatching System Base on Genetic Algorithms,TP311.52
  19. Research on DNA Encoding Based on Quantum Computing,Q75
  20. Research on Feature Selection Approach and Its Application in Network Traffic Identification,TP393.06
  21. Web Service Composition Based on QoS Awareness,TP393.09

CLC: > Industrial Technology > Chemical Industry > Synthetic resins and plastics industry > General issues > Machinery and equipment > Products processing molding equipment
© 2012 www.DissertationTopic.Net  Mobile