Dissertation > Excellent graduate degree dissertation topics show
Embedded-Technology-Based Development of the Motion Control System in a Missile-Target Simulator
Author: GaoWei
Tutor: ZuoXiaoGuang
School: Harbin Institute of Technology
Course: Control Science and Engineering
Keywords: embedded chip technology hardware-in-the-loop servo control system fuzzy control disturbance observer
CLC: TP273
Type: Master's thesis
Year: 2010
Downloads: 64
Quote: 0
Read: Download Dissertation
Abstract
|
In order to test and evaluate the XXX anti-tank missile, a missile-target hard ware-in-the-loop simulating system(MTSS) which is used for simulating the 2D motion of missile in the field of view goniometer was developed. The simulating system was based on the embedded chip technology of advanced RISC machines(ARM). The system has the characteristics of high integration, high reliability, high speed and high precision.Firstly based on the ARM+MCX314 dual CPU architecture, the hardware module of motion control system of MTSS was designed and achieved. At the same time, we solved transferring problem of the open source realtime operating systemμC / OS-II and analyzed the performance of the realtime operating system. Secondly, we designed the control law of servo control system of MTSS. Based on the established dynamic model of permant magnet synchronous linear motor, the velocity and position control of servo control system were researched and the highly velocity and position control precision were achieved. For velocity-loop control, we adopted the fuzzy control method to improve the reponse performance. For position-loop control, the method which combined disturbance obsever feedback with iterative learning algorithm feedforward was used to reduce the disturbance influence.At last, we made an experiment research on the designed system. The experiment results showed that the system performance met the design requirements.
|
Related Dissertations
- Attitude Control of a Three-Axis Stabilized Satellite,V448.22
- Research of Image Guided Technology for Cable Tunnel Patrol Vehicle,U469.6
- The Application of Fuzzy Control and Neural Network in Planar Double Inverted Pendulum,TP273.4
- Study on Adaptive Fuzzy Control Algorithm and Its Implementation,TP273.4
- The Grid-Connected Wind-solar Hybrid Generation System and Maximum Power Point Tracking,TM61
- Control System of Rotary Drying for Flake Agricultural Materials,S226.6
- Design and Research of a Multi-Use End-Effector for Harvesting Robot,S24
- Saw motor energy-saving controller for tilting sand stone processing DSP-based research and development,TM343
- Research of Energy Saving Control System of Pumping Unit Based on Fuzzy Control with Self-tuning of Scaling Factor,TE933.1
- Analysis and Realization of Pipe Extrusion Line Control System,TP273
- Design and Realization of Automatic Control in Wastewater Treatment,X703
- Reseach and Design of Servo Control System for Vehicle-borne Mobile Satellite Communication System,TN927.21
- Study of Precise Positioning and Antiswing for the Varying Rope Length in 3D Crane Base on Decouping and Fuzzy Control,TH21
- Universal Switching bot detection platform for research,TP242
- Research and Implementation of Embedded Intelligent Traffic Signal Control System,U491.54
- Research on Portable Verification System of Temperature of Position’s Environment,TP273.4
- The Comparation and Analysis of PID Control Methods for Resistance Furnace,TM924.3
- The Research and Development of Monosodium Glutamate Production Line Based on PCS7 Control System,TP273
- Research on Control Algorithm of PT Visual Turntable with Servo System,TP273.4
- Sintering Heat Treatment Process Modeling and Control Based on Data-drive,TP273
- Design of Control System for Welding Seam Tracking Based on DSP,TP242
CLC: > Industrial Technology > Automation technology,computer technology > Automation technology and equipment > Automation systems > Automatic control,automatic control system
© 2012 www.DissertationTopic.Net Mobile
|