Dissertation > Excellent graduate degree dissertation topics show

Research on Precise Tension Controller of Fiber Winding and Placement Machine

Author: ZhuHongLei
Tutor: LuHua
School: Harbin Institute of Technology
Course: Mechanical Manufacturing and Automation
Keywords: tension control I-PD control PIC MCU digital AC servo motor LabVIEW
CLC: TP273.5
Type: Master's thesis
Year: 2010
Downloads: 39
Quote: 1
Read: Download Dissertation

Abstract


Nowadays fiber composite materials are widely applied, because they can make up many defects of metal. Fiber winding and placement are two common methods in composite molding process, in which fiber tension is an important parameter, directly affects the performance of materials. Thus fiber tension control is a key technology during the winding or placement process. As the fiber winding or placement technology has its own characteristics, the requirements of tension control are also different, involving more factors than other kind of tension controller. The static and dynamic performance required of the system is also higher than others, which makes the research on this kind of tension controller complex and difficult.In this paper a closed-loop tension control system is built, with PIC16F877A MCU, digital AC servo motor as actuator and tension sensor for feedback. And the AC digital servo motors is not only the actuators but also the back yarn motor.According to the control system the mathematical model of main components are established and then transfer function of system is also obtained. Based on the analysis in the performance of system with PID correction simulation and analysis are complemented by SIMULINK toolbox of Matlab. Considering the characteristics of the tension control system finally I-PD control is adopted.The hardware and software of system are designed. Firstly, hardware system is designed according to the control performance requirement. Chip selection and periphery circuit development are accomplished, on the base of which the PCB design of main control circuit is also completed. Software includes design of program in MCU and PC. The program in MCU is mainly including integral PID algorithm, digital filter program, software interface of peripheral device, etc. Software in PC mainly realizes the real-time monitoring of tension, alarm for break yarn and data preservation, etc. Structure of the experimental table is introduced and standardization of the main components is accomplished. Analysis of dynamic and static performance of system is conducted by measuring the curve of real-time tension value when the setting value or speed change, steady state and yarn back. The results show that in constant speed and constant tension condition volatility and static slip of system meet the requirements for tension control. When the winding tension value or speed changes, tension controller acts rapidly and accurately.

Related Dissertations

  1. Simulation System for Aluminum Foil Cold Mill and Research of Tension Control,TG334.9
  2. The Design and Analysis of Constant Tension System of the Hydraulic Winch Drive System,TH21
  3. Research and Realization of the Shaftless Driven Printing Control System,TP273
  4. Control and Simulation of Zero Velocity Meet Paper Machine Tension System,TP273
  5. Research on Obstacle-avoiding Fuzzy Control System of Mine Rescue Robot,TP242
  6. Test System for Red High-definition Optical Pick-up Based on Lab VIEW,TP274
  7. Indoor environmental remote monitoring system based on virtual instrument design,TP274
  8. Research family medical observation diagnostic system based on LabVIEW,TP274
  9. Statically and Dynamical Characteristics Analysis on Two Stands Reversible Cold Rolling Mill,TG333
  10. The Research Application of Hydraulic Looper in Meishan Hot Strip Mill,TG333
  11. The Study on the Dynamic Model and the Control Method of Hydraulic AGC System,TG333
  12. Research and Design of Virtual Oscillograph Based on ARM9,TM935.3
  13. Application and Research of Virtual Instruments Technology in the Power System Measuring,TM933.4
  14. Study on the Insulation On-line Monitoring System of HV Motor,TM306
  15. Control and Simulation of Electric Power Steering System for Automobile,U463.4
  16. Hybrid Control System Combined Tension with Position of Slitter for Precise Stainless Steel Tape,TP273
  17. Designing and Researching of the Tension Control System in the FFX Pipe Mill Line,TP273
  18. Research and Development of Internet-based Interactive Control System for Remote Tension,TP273
  19. Research on Tension Control in 2050 Hot Rolling Slitter Line Decoiler,TP273.5
  20. The Alteration of Electric Control System and the Research of Loop Control System for High Speed Wire-rolling Mill,TP273

CLC: > Industrial Technology > Automation technology,computer technology > Automation technology and equipment > Automation systems > Automatic control,automatic control system > Computer control, computer control system
© 2012 www.DissertationTopic.Net  Mobile