Dissertation > Excellent graduate degree dissertation topics show

Research on Excitation Signal and Frequency Domain Identification of the Servo Control System

Author: TanZhiHong
Tutor: LiJianGang;ZhangDongJun
School: Harbin Institute of Technology
Course: Control Science and Engineering
Keywords: Servo System Frequency domain identification Incentive Design Chaotic signals Bandwidth-constrained
CLC: TP273
Type: Master's thesis
Year: 2010
Downloads: 135
Quote: 0
Read: Download Dissertation

Abstract


Motion control system is widely used in all areas of industry , such as semiconductor packaging , CNC machine tools , industrial robots . System identification is the basis for the design of the controller , especially in the high speed and high precision motion control system design process , the identification of appropriate systems to improve the performance of the control system to provide the most basic knowledge . In this thesis , the research work include the following aspects : (1) servo control object mechanism modeling based on the gray box identification . Simplify the design of the controller control system operates below the cutoff frequency for the convenience of papers departure from the design point of view of the excitation signal , by ignoring the high frequency band model to approximate the system model , the analysis of the system cutoff frequency 3dB down at a frequency point a lot of work such as frequency domain characteristics . (2) select the excitation signal for the identification of theoretical analysis, a wide band of pseudo-random binary signal , it will stimulate the high-frequency modes of the system , and on simulation analysis pseudo-random binary signal is not suitable to be chosen as the need to ignore the high the conclusions of the excitation signal band model identification . ( 3 ) analysis of the spectral bandwidth of the input signal , the amplitude of the differential signal amplitude , designed for mechanical and electrical system identification sweep signal , the instantaneous frequency sweep signal changes linearly with time , while the least-squares iterative algorithm for identification time-dependent , so the identification result with the sweep cycle change periodically , and the identification result does not converge . (4 ) The paper presents a chaotic signal as excitation signal electromechanical system identification , because the signal has spectral characteristics of continuous, smooth , and its bandwidth can be set limits . Frequency response experimental design suitable for mechanical and electrical system identification chaotic signal for identification , recognition results convergence frequency domain characteristics of the system are obtained . Verification experiment proved chaotic signal is a good electrical and mechanical system identification excitation signal , can be safely applied to electrical and mechanical systems , can be a good approximation in the low - frequency model .

Related Dissertations

  1. Research on Gyro Stabilized and Tracking Platform,V241.5
  2. Several Key Issues on Closed-Loop Control for Precision Laser Tracking Device,TN249
  3. Research on the Synchronous Control Algorithm of a Special Target Simulator,TP273
  4. Sliding Mode Variable Tructure Control for Separating-Mirror System and Inhibit Chattering,TP273
  5. Design of Weapon Detection Device Control System,TP183
  6. Research of Software Way for Canopen-protocol’s Realization and Implantation in Servo System,TP273
  7. Study on Properties of Compound Dynamic Damper,TB535.1
  8. Aerocraft Simulator Servo System Controlling & Parameter Tuning Techniques,V249.1
  9. Based on Virtual Instrument Simulation Load Test System Design,TP274
  10. Linear Servo System Based on thermoacoustic engine output characteristic simulation study,TM301
  11. The Development of the Flat Screen Printing Machine Control System Based on CPLD,TP273
  12. Research and Design of the De-weighting Controlling System of the Automatic Dynamic Balancing Machine,TH877
  13. The Servo System Design of Welding Oscillator Based on Nios Ⅱ,TG43
  14. The Electric Design of Computer Numerical Controlled Water Jet Cutter with a Cantilever Beam,TG659
  15. Research on the Back-stepping Control of Ac Servo System for the Permanent Magnet Synchronous Motor,TM341
  16. The Study and Application of Nonlinear Control in the Electro-hydraulic Position Servo System,TM921.541
  17. The Designation of Permanent Magnet Synchronous Motor AC Servo System Basing on DSP,TM921.541
  18. Design and Implementation for Variable Universe Fuzzy Control Strategy of Electric Rudder Servo System,TJ765.2
  19. Research on Direct Drive Position and Pressure Control Electro-Hydraulic Servo System,TH137.31
  20. Studies on Experimental Modeling and Frequency Domain Identification of Nonlinear Systems,O322

CLC: > Industrial Technology > Automation technology,computer technology > Automation technology and equipment > Automation systems > Automatic control,automatic control system
© 2012 www.DissertationTopic.Net  Mobile