Dissertation > Excellent graduate degree dissertation topics show
Research and Implementation of Mine Track Transport Monitoring System Based on a Variety of Communications Technology
Author: MuYuanXiang
Tutor: ZhangJianJun
School: Hefei University of Technology
Course: Mechanical Manufacturing and Automation
Keywords: Mine Transport Monitoring System Industrial Ethernet Fieldbus ZigBee Real-Time performance
CLC: TP273
Type: Master's thesis
Year: 2008
Downloads: 60
Quote: 0
Read: Download Dissertation
Abstract
|
The field bus supports distributed control and real time control, but misfits long distance transmission; With the elevated certainty, real-time performance and intrinsically safe performance, industrial Ethernet has become more and more prevalent in industry control field. Mine Track Transport Monitoring System is a key component of Coal Mine Safety Monitoring System, but the existent monitoring systems have the short comings of low transmission rate, and poor flexibility and at the same time can not transfer images and other information, therefore, a design based on industrial Ethernet and Field bus architecture Mine Track Transport Monitoring System has the applicable value.Consider the demand of coal mine monitoring equipment, this paper established the network structure which adopt the wireless communication technology of industrial Ethernet, the CAN Bus and the ZigBee based on the analysis of communication technology that often used in the industrial control network. The hardware circuits of the CAN-Ethernet gateway, the Dynamic signal station and the Mobile signal station were designed; The routing scheme about wireless communications of Mobile signal station and the software about a Dynamic signal station and the Mobile signal station were designed ,it has achieved the reliable communication between Dynamic signal station and Mobile signal station; Developed the addressing method for the Ethernet; Analyzed and calculated the largest delay of the Ethernet communication theoretically; Analyzed the largest message delay of the CAN nodes that has the lower priority and introduced the upgrade method of dynamic priority in sending program of CAN, consequently the maximum delay of the lower priority CAN node can be identified according to the requirement of delay; Finally the anti-jamming measures of software and hardware in the system were discussed, and validated the function and performance in the laboratory environment.The industrial Ethernet, CAN bus and ZigBee wireless communication technology are integrated into the system and play their respective advantages, the system has had the desired effect.
|
Related Dissertations
- Wireless Sensor Net Based Study on Comprehensive Energy Monitoring Technology of Electric Vehicle,U469.72
- Research of ZigBee Node Used in Smart Home,TN929.5
- Research of PROFIBUS-DP Typical Application System,TP273
- Based on ZigBee wireless sensor network research,TN929.5
- The Internet of Things Applied Research in Clothing Industry,TN929.5
- Research and Design on Indoor Localization System Based on ZigBee,TN929.5
- Study on Time Synchronization Method for Urban Lighting Management System,TM923
- Study of Personnel Positioning System of Mine Based on ZigBee Technology,TN929.5
- Location Assisted Wi-Fi Discovery on Mobile Devices for Energy Saving,TN929.53
- Wireless Sensor Network Based on ZigBee Monitoring Intelligent Building Environment,TN929.5
- The Research of Radio and Television Timing System on the Basis of Beidou Satellite and ZigBee Communication Technology,TN948
- Soccer Data Acquisition System,TP212.9;TP274.2
- Study of the Greenhouse Environment Supervisory System Based on WSN,TP274
- Research and Design of Wireless Localization System Based on ZigBee,TN929.5
- Research of ZigBee Key Technologies Based on Energy-Optimization,TP212.9
- Research and Application of Localization Technology Based on ZigBee Technology,TP212.9
- NCUC-Bus fieldbus technology research and implementation,TP273.5
- Industrial Ethernet fieldbus technology and control systems in a multi- node Research and Application,TP273
- Design and Implementation on Data Acquisition and Transmissionof Power-supply Facilities and Environment Supervising System Shantou Telecom Branch,TP277
- Wireless sensor network data fusion algorithm,TN929.5
- Wireless Sensor Network for Rescue and Relief Based on Zigbee Technology,TN929.5
CLC: > Industrial Technology > Automation technology,computer technology > Automation technology and equipment > Automation systems > Automatic control,automatic control system
© 2012 www.DissertationTopic.Net Mobile
|