Dissertation > Excellent graduate degree dissertation topics show

The Researches on the Specific Pressure and the Contact Stress of the End Face Harmonic Gear Drive of Oscillating Teeth

Author: ChenLiang
Tutor: ZhangYouLin
School: Wuhan University of Technology
Course: Mechanical Design and Theory
Keywords: Oscillating Tooth End Face Harmonic Meshing area Specific pressure Contact stress
CLC: TH132.41
Type: Master's thesis
Year: 2005
Downloads: 135
Quote: 0
Read: Download Dissertation

Abstract


The end face harmonic gear of oscillating teeth is one a latest inventions, which contains the advantages of the common harmonic gear drive and the oscillating tooth. There will be a great future of applying it to mine, mechanism, metallurgy and construction areas, which need large transmission ratio and power. According to the document retrieval results, the reports of this device are little, and the researches are the latest in the world.This paper expatiated the traditional harmonic gear and oscillating tooth drive briefly, introduced the structure, composition, driving principle and the meshing-state geometrical model of the end face harmonic gear of oscillating teeth. The stress of the engagement pair between the front-end oscillating teeth and the end face gear, and between the rear-end of oscillating teeth and the cam of the wave producer, are both researched. The conclusions are as follows:(1) The regularity of the total meshing area of the engagement pair between the front-end of oscillating teeth and the end face gear is researched based on the meshing-state geometrical model. Focusing on the single-tooth and the multiple-teeth mode, the relation between the number of the oscillating teeth and the wave number are analyzed. And the equations are also deduced, the periodical regularity of the total meshing area is determined.(2) The regularity of the total meshing area of the engagement pair between the rear-end of oscillating teeth and the wave producer is analyzed, respectively in the sing-tooth mode and the multiple teeth mode. The equation and the regularity are obtained.(3) The stress of the oscillating teeth are researched, the front-end engagement pair’s normal force’s calculating formula is deduced, as well as the rear-ends(4) Based on the conclusion above, the equations of the theories specific pressure are deduced, and it has been compared with the straight gears in a calculating example.(5) After the theories surface modified, the contact stress of the engagement pairs are researched, when it is in the line-contacting areas. The equations of the contact stress of the engagement pairs are deduced, when it is in the hazardous conditions, according to the formula of Hertz.This paper also analyzed and expected the profound researches of the intensity of the engagement pairs, and some of them are simply discussed. The theories researched of the intensity of this device laid a foundation to constructing a full standard and intensity theories of the end face harmonic gear of oscillating teeth, and the conclusions could be used as the given theories.

Related Dissertations

  1. The Needle Roller Bearings Analysis of a Tracked Armored Vehicle Suspension,TJ810.3
  2. Numerical Analysis of Wheel/Rail Contact Stress,U211.5
  3. Research on Motion Equation and Reliability for Yaw and Blade Bearing in Wind Turbine,TH133.3
  4. Research of Stress Auto Separating Method in Digital Photo-elasticity and Its Application in Contact Problem,O344.1
  5. Finite Element Analysis of Shrink-Fit Surface in a Wheelset Assembly,TH131.7
  6. Contact Dynamics and Finite Element Analysis of Operating Mechanism for Automatic Mechanical Transmission,U463.212
  7. Study on Static and Dynamic Behavior of Multi-hybrid Arch Bridge,U448.22
  8. Experimental Investigation on Anti-wear Properties and Numerical Simulation of Automobile Gears with Bionic Concave Morphology,U467
  9. Research and Application of Analysis Methods on Transmission Gears Load Capacity,TH132.41
  10. Meshing Characteristic and Stress Analysis of Straight Bevel Gear with the Asymmetric Teeth,TH132.41
  11. Meshing Characteristic Research of Quasi-Transverse-Circular-Arc Gear,TH132.41
  12. Stress Analysis and Tooth Profile Optimization of Asymmetric Involute Gear with Two Pressure Angles,TH132.41
  13. Parameter Modeling and Finite Element Analysis for Final Drive Spiral Bevel Gear,TH132.41
  14. Failure Analysis for Roll Surfacing,TG455
  15. Small-caliber bullet in the chamber system, finite element analysis,TJ03
  16. The Meshing Researches on Asymmetrical Tooth Shape of Oscillating-teeth End-face Harmonic Gear,TH132.41
  17. Coating / substrate system stress intensity factor Numerical Study,O346.1
  18. Turbine rotor contact stress analysis and stress intensity factor calculation,O347.6
  19. Study on the Safety Assessment and Structure Strength of Triple Valve Plugging-seal-off Components Used in Shan-jing Gas Pipeline,TE973
  20. The Researches on the Meshing Theory of End Face Harmonic Gear Drive of Oscillating Teeth,TH132.4
  21. Workflow Management System Based on Dynamic Analysis of Gear platform development,TH132.41

CLC: > Industrial Technology > Machinery and Instrument Industry > Mechanical parts and gear > The transmission mechanism > Meshing > Gears and gearing
© 2012 www.DissertationTopic.Net  Mobile