Dissertation > Excellent graduate degree dissertation topics show
Stability and Control of a Tethered Mass System
Author: DingFeng
Tutor: JinDongPing
School: Nanjing University of Aeronautics and Astronautics
Course: General and Fundamental Mechanics
Keywords: Tethered mass system Parametric vibration Chao Optimal control Reference trajectory Model experiment
CLC: TU399
Type: Master's thesis
Year: 2006
Downloads: 182
Quote: 0
Read: Download Dissertation
Abstract
|
Cables are widely used in various engineering fields, such as civil engineering, electric communication engineering and space engineering. The objective of this study is to develop LQR controllers for a tethered mass system.A dynamical model is derived, which makes three kinds of motion (translation, load hoisting or lowering, rotation) simultaneously. A set of non-linear differential equation of this model is formulated based on Lagrange’s Equation. The tension of the cable, the control force of translation and the control torque of rotation are obtained by the method of Newton’s Laws in vector space.The tethered mass system is modeled as a spherical pendulum. The motion of in-plane and out-plane are coupled each other. The existence of nonlinearities and symmetry between the dynamics of the in-plane and out-plane directions produce energy exchange between the two modes. The frequencies of translational actuation influence the stability of the tethered mass system. When the frequencies approach the natural frequency of the system, the period of energy exchange decreases and the amplitude of the pendulum increase. When the frequencies equal to the natural frequency of the system, resonance appears. The cable been lowered leads to asymptotic stability of the system. Oppositely, the system is unstable if the cable been hoisted. It is interesting when the system slew uniformly, chaotic motion presents. The equation of motion is linearized near the equilibrium position of the tethered mass system. Then the LQR controllers are developed to control translation and rotation of the system separately. These controllers demonstrate effective performances by numerical simulations. The simulations also indicate that the system track the reference trajectories well under the control of trajectory track control laws. In the end, an experimental apparatus for tethered mass system is utilized to
|
Related Dissertations
- Research on Processed Surface Roughness of Ram Hole by Fiber Measuring Technology,TG84
- Design and Development of the Intelligent Optimal Control Software Platform of Rotary Kiln,TP273
- Based on fuzzy reasoning annular multi -stage inverted pendulum modeling and control,TP13
- Chao Chinese International Education Thought and Practice of,H195
- Xu Shao Xuan Naigu Poems with Swiss research,I207.22
- Optimum Control of Shell-tube Heat Exchanger Based on Sewage Thermal Utilization,TU831.4
- The Research of Four-wheel Steering Based on Optimal Control and Co-simulation,U463.4
- Optimal Synchronization Control of a Class of Underactuated Lagrangian Systems,TP13
- Image sensor based on multi indoor location system,TP391.41
- Study on Agent Based Simulation of Bus Rapid Transit System,TP391.9
- Cystic Ultra Social Thought,C91-092
- A Polysystem Approach to Chao Yuanren’s Chinese Translation of Alice’s Adventrues in Wonderland,I046
- One Type of Degradation of Complex Repairable Systems the Optimal Control Solution,O232
- Optimal Dividend and Investing Control of a Insurance Company with Higher Solvency Constraints,F840
- Research on Proportional-plus-derivative Feedback Guaranteed Cost Control of Descriptor Systems,TP13
- On the Transference of the Verbal Humors in Alice’s Adventures in Wonderland,H315.9
- Research on the Age-dependent Problems of One Dimension Pure Forest in Biology Evolution Systems,S711
- Ningxia Hengli maintenance of equipment control optimization,TH17
- Bridge Type Reclaimer Modeling and Research on Control Methods,TH237.1
- Effect of Underground Pipe Construction on Existing Tunnel Stability,U451
- Intelligent control plane inverted pendulum system and virtual prototyping,TP273.5
CLC: > Industrial Technology > Building Science > Building structure > Other structures
© 2012 www.DissertationTopic.Net Mobile
|