Dissertation > Excellent graduate degree dissertation topics show

Study on On-line Fouling Monitoring and Optimizing Sootblowing System for Pulverized Power Plant Boilers

Author: LiuDingPo
Tutor: LuJiDong
School: Huazhong University of Science and Technology
Course: Thermal Power Engineering
Keywords: deposition slagging fouling on-line monitoring optimizing sootblowing fuzzy model convection heat surface furnace
CLC: TK229.6
Type: Master's thesis
Year: 2005
Downloads: 153
Quote: 2
Read: Download Dissertation

Abstract


Ash deposition and slagging on boiler heat exchange surfaces is a common phenomenon in fossil fuel fired power plants. This thesis focuses on the building a suitable model of soot deposition status of heat surfaces, and constructs a on-line monitoring system for heat exchange surfaces based on the built model. All of the work is based on a 300MW boiler. First, the thesis introduces the endangerment of soot deposition on boiler heat exchange surfaces. In order to reduce the loss due to fouling of the heat exchange surfaces and improve economic efficiency of the boiler, it is necessary to monitor the fouling statues of heat exchange surfaces and predict its development, then sootblowers can be scheduled properly. Subsequently, the thesis makes a comparison of other fouling monitoring systems for boiler heat exchange surface. And the thesis introduces the software and hardware of common sootblowing systems, which are the fundament of sootblowing optimization. Based on the data from DAS of power plant and using heating balance theory, the thesis puts forwards fouling monitoring models for boiler heat exchange surfaces including superheaters, reheaters and economizer. Cleanliness factor (CF) is used to assess the fouling statues of each surface. Using pressure difference method, the fouling monitoring model for rotary-type air preheater is built, and then these models are tested. After analyzed the model shortage of using CF as solely monitoring parameter, the new fuzzy model of optimized sootblowing monitoring system is brought forward. The input parameters of the models are CF, wall temperature of each heating surface and load of plant. The output is the degree of confidence of sootblowing. At last, the model is used to simulate the ashing degree of economizer surface. The result shows the model improves the precision of fouling monitoring in utility boilers and is suitable for the fouling process of heating surface. Using the outlet gas temperature of furnace as parameter, the whole fouling monitoring of furnace is built. Two methods are discussed which are heating flux and temperature difference of the furnace water wall. Finally, the thesis summarizes the studies and puts forward problems for further studies.

Related Dissertations

  1. Numerical Simulation on the Combustion Process in the Furnace of a 1000MW Lignite-Fired USC Boiler,TK224.11
  2. Experimental Study and Numerical Simulation on Aerodynamic Field of Tangential Bias Swirl Burner,TK223.23
  3. Fault Diagnosis Research on Three-Tank System,TP277
  4. Under microaerobic conditions closed calcium carbide furnace exhaust COS gas adsorption purification,X781
  5. Study of Microwave Assisted Incineration of Asphalt Flue Gas,X701
  6. Effects of Dietary Oil Sources on Growth Perfomance, Lipid Deposition and Blood Biochemical Index of Carassius Auratus Gibelio,S963.1
  7. Iron-doped SnO \u003csub\u003e 2 \u003c/ sub\u003e ceramics and thin films research,TQ174.6
  8. The Deposition Rule and Gene Expression Involved in Yolk Cholesterol in Different Layer Breeds,S831
  9. Development of Functional Automotive Interior Textiles,TS106.6
  10. Atmospheric Deposition of Nitrogen and Phosphorus and Its Contribution in the Regional Nutrients Circulation in Changle River Watershed,X131.2
  11. Study on the Treatment of Domestic Wastewater by Sequencing Batch Membrane Bioreactor,X703
  12. The Research and Application of Modified Algorithms About Fuzzy Predictive Functional Control,TP273
  13. Response of the Capsule Production and Spore Germination of Sphagnum Species in Hani Peatland to Environmental Changes,Q945
  14. Growth of Single-walled Carbon Nanotube Arrays and the Study of Their Adhesion Force,TB383.1
  15. Design and Implementation of Steel Componential Analysis System of Ladle Furnace in Tonggang,TP311.52
  16. Stainless Steel Bright Annealing Furnace with Waste Heat Recovery Energy-saving Technology Research,TG155.1
  17. Preparation of Electroless Plating on Heat Transfer Surface with Low Surface Free Energy and Study on Their Anti-fouling Property,TK172
  18. Design and Optimization Control of the Electroslag Furnace Atomization Automatic Control System,TP273
  19. The PLC Design and Implementation of Blast Furnace System Based on Experts-learning Algorithm,TP273
  20. The Design and Implementation of Control System for Wire-steel Heat Treatment Direct-fired Furnace,TP273
  21. The Study of the Comprehensive Utilization of Energy in Carbon Product Enterprises,TQ127.11

CLC: > Industrial Technology > Energy and Power Engineering > Steam Power Engineering > Steam boiler > Various types of boilers > Coal-fired boilers
© 2012 www.DissertationTopic.Net  Mobile