Dissertation > Excellent graduate degree dissertation topics show

A Model for Predicting Weld Metal Composition of Laser welding of Stainless Steel

Author: ZhuXiuJun
Tutor: XiongJianGang
School: Huazhong University of Science and Technology
Course: Materials Processing Engineering
Keywords: Laser penetration welding Stainless steel Simulation model of weld metal composition change Microstructure
CLC: TG456.7
Type: Master's thesis
Year: 2005
Downloads: 440
Quote: 2
Read: Download Dissertation

Abstract


The laser penetration welding is popularly used in industry field. The use of high-power density laser beam to weld many alloys often leads to appreciable changes in the composition and properties of the weld metal. In this paper, a model is presented to predict the weld metal composition change during laser penetration welding. And some research has been carried out to study the weld microstructure transform. The temperature field is simulated from a well-tested three-dimensional transient heat transfer and fluid flow model through the numerical solution of the equation of conservation mass, momentum, and energy. The influence of plasma and keyhole is considered. Three aspects are considered in simulating the composition changes. The first, vaporization due to pressure gradient, It’s the most important factor; The second, vaporization due to concentration gradient; the third, the attraction between the positively charged metal ions and the negatively charged vaporizing surface leads to enhanced condensation of metallic species because of the exist of the plasma. Composition changes in weld are founded because three factors are existed at the same time. The model is verified also in this paper, the results of the experiment are in good agreement with the calculation; the error is founded because of the complicated theory of the laser penetration and some simplicities of the model. The weld microstructure transform is also analyzed in this paper; the results of the theory are in good agreement with the results of the experiment.

Related Dissertations

  1. Reactive Hot-Pressing and Mechanical Properties of （ZrB2-ZrO2）/BN Composites,TB332
  2. Microstructure and Mechanical Properties of Mg-Zn-Y-Zr Alloys,TG146.22
  3. Investigation on Microstructure and Properties of Cadmium-Free Silver-Based Intermediate Temperature Filler Metals,TG425.2
  4. Research on Technology and Mechanism of Joining Cemented Carbide to Carbon Steel,TG454
  5. The Investigations on the Characteristics and Mechanism of NIR Emission from Bi-doped Silicophosphate Glasses,TQ171.1
  6. Preliminary Study on Salt-Tolerant Mechanism of the New Pennisetum Purpereum Schumach Variety-Sumu No.2,S543.9
  7. Study on the Fine Structure of Intestine and Intestinal Mucosal Barrier in Zebrfish (Brachydanio Rerio),Q95-33
  8. Study on Characteristics of Morphology Anatomy and Physio-Biochemistry of Two Ecotype Varieties Cucumber Leggy Seedilings,S642.2
  9. Study on the Mechanism of Heat-Induced Gelation of Myofibrillar Proteins,TS251.1
  10. Studies on the Aggregation and Microstructure of Imidazolium Ionic Liquids in Solutions,O645.1
  11. Environmental Effects of Poisonous and Harmful Substances in the Typical Industrial Solid Wastes,X705
  12. Studies of Luminescence Characteristics of Eu3+-doped Rare Earth Borates REBaB9O16 （RE=rare Earth Ions and Y）,O627.3
  13. Biocompatibility Modification of Solid Materials Via Living Free Radical Polymerization,O631.3
  14. The Research on Extrusion Parameters Through the Plate Billet of Magnesium Alloy,TG379
  15. Stainless Steel Bright Annealing Furnace with Waste Heat Recovery Energy-saving Technology Research,TG155.1
  16. Study on Stock Price Behavior Around Periodical Reports Based on Asymmetric Information,F832.51
  17. Research on Processings and Microstructure and Properties of HRB400MPa,TG335
  18. Study of Performance of Cordierite Combined Mullite Products,TQ175.71
  19. Failure Analysis on Superheat Section Connecting Pipe Flange of Ethylene Cracking Furnace,TQ221.211
  20. Effect of Adding ZrO 2 Nanopowder on Microstructure and Mechanical Properties of Carbon Steel,TB383.1
  21. Study on the Dry Cutting Performance of Austenitic Stainless Steel 0Cr18Ni9,TG142.71

CLC: > Industrial Technology > Metallurgy and Metal Craft > Welding, metal cutting and metal bonding > Welding process > Special welding > Laser welding
© 2012 www.DissertationTopic.Net  Mobile