Dissertation > Excellent graduate degree dissertation topics show

Analysis and Design of the Motion Controller of LED Printer

Author: ZongYan
Tutor: TianYuMin
School: Xi'an University of Electronic Science and Technology
Course: Computer System Architecture
Keywords: LED Printer Motion controller Step motor Microcontroller FPGA
CLC: TP334.8
Type: Master's thesis
Year: 2009
Downloads: 32
Quote: 0
Read: Download Dissertation

Abstract


With the development of Semiconductor Industry, LED printing techniques becomes widely used. As the.main executing module of LED printers, motion controller is responsible for receiving and interpreting commands from the main controller, detecting signals of sensor, controlling the motion of all parts, in order to make the printer printing orderly.The working principle and system structure of LED printer are analyzed. Based on this, the electrical design scheme of it is proposed. According to the general design scheme and mechanical structures of LED printers, the motion controller is designed. Then, the implementation of software and hardware is discussed.Microcontrollers and chips of FPGA are adopted as the kernel of motion controller. The design of each hardware modules is described in detail. IP-core design of step motor controlling modules on FPGA is realized with analyses of method for speeding up controls of two-phase step motor.Flows of control on main procedures of motion controller and each functional procedures are analyzed in software design, combined with the detecting of sensors, step motors and relays of paper feeding channels, paper feeding through paper box and signal channel is also realized. United operation of paper feeding mechanism is also made sequentially.Finally, the test scheme to testing the precision of motor-driving controller module is made, and concludes with a indication that this designed motor-driving controller module meets the precision requirement of motor controller.

Related Dissertations

  1. Research on Electromagnetic Acoustic Transducer Detection System Based on FPGA,TH878.2
  2. Study on Drive and Control System of Five-Phase PMSM Based on FPGA,TM341
  3. Development of LXI Arbitrary Waveform Generator,TM935
  4. Design of Digital Predistorter for RF Power Amplifier Based on FPGA,TN722.75
  5. Synchronization and Channel Estimation Algorithm in Bursted OFDM System and Its Implementation on FPGA,TN919.3
  6. Performance Analysis of Anti-Multipath Capability in DSSS System and Study on the Compensation Methods,TN914.42
  7. Optimizing and Realising Research on Vedio Compression in TV Guidance System,TN919.81
  8. Research and Hardware Simulation of Multiuser Spread Spectrum Code Acquisition Based on FPGA,TN914.42
  9. Research on Basic Algorithms of Digital Image Processing and Implementation with FPGA,TP391.41
  10. Research of High Speed Image Pre-processing System Based on FPGA,TP391.41
  11. Design of High-Speed Digital Image Acquisition and Interface Based on FPGA,TP274.2
  12. Development of Inductance Sensor Data Acquisition System Based on FPGA,TP274.2
  13. Development of Serial Bus Analyzer Based on Nios,TP274
  14. Development of PMC High-speed Data Transmission Board Design Based on FPGA-RocketIO_X,TP274.2
  15. Development of LXI Counter,TP274
  16. A High-Speed and Real-Time Data Acquisition System Based on FPGA,TP274.2
  17. A Research and Development for Single Chip Micyoco AVR Usage,TP368.12
  18. Design of GPS Information Receiving System Based on Nios Ⅱ,TN967.1
  19. Temperature and pressure explosives temperature field memory test technology,TQ560.7
  20. The Design of Experimental Device for Mine Motor Soft Starter,TM343.2
  21. Erbium-doped fiber amplifier pump laser drive source research applications,TN248

CLC: > Industrial Technology > Automation technology,computer technology > Computing technology,computer technology > Electronic digital computer (not a continuous role in computer ) > External device > Printing devices
© 2012 www.DissertationTopic.Net  Mobile