Dissertation > Excellent graduate degree dissertation topics show

The Optimum Design and Dynamics of a Kind of Planar Robots with Actuation Redundancy

Author: LiuYing
Tutor: HuangZhen；ZhangLiJie
School: Yanshan University
Course: Mechanical and Electronic Engineering
Keywords: Actuation redundancy Parallel robot Indices atlases Optimum design Dynamics Control method
CLC: TP242
Type: Master's thesis
Year: 2006
Downloads: 313
Quote: 4
Read: Download Dissertation

Abstract


Parallel robots with actuation redundancy attract more and more attentionof researchers these years, because they can improve performance of parallelrobots. But their structure and actuated way are very complicated, so the studyof the mechanism design and analysis are also complicated, and there is littleachievement in this field on the world, therefore, there is very significantmeaning in theory and practice to studying them.The subject of this thesis is planar 2-DOF parallel robot with actuationredundancy, optimum designing the mechanism, analyzing its dynamics andstudying its control method. It can offer scientific gist in theory for the designand control study of this type of parallel robot.This paper study the relationship between the link lengths and theperformance of the planar 2-DOF parallel robot with actuation redundancy bymaking use of the physical model of the solution space, and plot the atlases ofthe workspace、dexterity、payload、velocity and stiffness global indices for therobot in the physical model of the solution space, and analyze the distributionlaw of the indices in the physical model of the solution space in detail.According to the workspace and these performance atlases, the basic designprinciples for the parallel robotic mechanisms are presented, the parameters areoptimized and a design example is given. On the basis of it, assembly structureof the manipulator is optimized. It is the reference for designers to designrobotic mechanisms by making use of kinematics performance.The mathematic model of dynamics for the planar 2-DOF parallel robotwith actuation redundancy is set up by Lagrange equation andLagrange-D’Alembert’s equation in this thesis, and the dynamics of the robot isanalyzed.Based on the Simulink module of MATLAB, this thesis establish themodel of the planar 2-DOF parallel robot with actuation redundancy, and thesimulation for a typical motion is carried out and the kinematics state of theactuated joints are presented. According to the mathematic model of dynamicsof the parallel robot, through the program operation, the curves of the actuatedjoint torques are obtained.Two typical kinds of control methods_ PD control and computed torquecontrol are discussed and applied to the planar 2-DOF parallel robot withactuation redundancy, then the control block diagram of these two algorithmsare plotted.

Related Dissertations

  1. Modeling Analysis and Slip Estimation for Lunar Rovers,TP242
  2. Reaserch on Dynamics for Fast Walking of Biped Robot,TP242.6
  3. Analysis and Control of 6-DOF Electrical Driven Parallel Manipulator,TP242.2
  4. Influence of Nanostructure on Hydrophobic Properties at TiO2 Surface Studied by Molecular Dynamics Simulation,O614.411
  5. The Dynamic Performance Analysis of Oil Pumping Center and Structural Optimization of Improvement,TE933.1
  6. Alpine Meadow nitrogen mineralization and microbial Mechanism,S812
  7. Simulation Analysis and Improvement of Car Ride Based on Virtual Prototype,U461.4
  8. Numerical Simulation of Flow and Mass Transfer in Tubular Electrochemical Reactor for Organic Wastewater Treatment,X703
  9. Design and Performance Simulation Research of the Reconfigurable Mobile Wheel-armed Robot,TP242
  10. Three-dimensional Stimulation about Outflow Coefficient of the V-Cone Flow Meter,TH814
  11. Reliability Sensitivity Analysis of Elevator System Frequency and Main Actuating Device,TU857
  12. Research on the Dynamic Characteristics of 3DOF Manipulator,TP242
  13. The Dynamic Simulation on Sintering Machine Based on Virtual Prototype Technology,TH113
  14. Gait Analysis and Dynamic Research on Biped Walking Robot,TP242
  15. Five parallel robot kinematics simulation and structural analysis,TP242
  16. Analysis of Water Resources Carrying Capacity Based on a System Dynamic Model and System Optimization,X26
  17. Development-oriented Poverty Alleviation Project Simulation and Post Evaluation Based on SD-AHP,F323.8
  18. Research on Force/Position Control for 6-DOF Parallel Platform,TP242
  19. The Study on the Method of Structural Dynamic Modeling and Analysis of Wind Power Transformers,TM41
  20. Optimization and Blood Damage Prediction of a Micro Ventricular Assist Device,R318.6
  21. Research on Evaluation and Simulation of Circular Economy Development of Pingxiang City,F127;F205

CLC: > Industrial Technology > Automation technology,computer technology > Automation technology and equipment > Robotics > Robot
© 2012 www.DissertationTopic.Net  Mobile