Dissertation > Excellent graduate degree dissertation topics show

The Implementation of SW/HW Co-design Platform for IPOD System

Author: ChenKai
Tutor: ZhouZuCheng
School: Tsinghua University
Course: Information and Communication Engineering
Keywords: IPOD Software-Hardware co-design FPGA clamp diode
CLC: TN943.3
Type: Master's thesis
Year: 2005
Downloads: 144
Quote: 0
Read: Download Dissertation

Abstract


With the popularization of remote education of China, more and more satellitedata receive equipments were required and the market need a low cost satellite datareceive card. IP Over DVB (IPoD) System was brought forward under thisbackground. It’s a satellite data receive system with single chip. In order to keephigh efficiency during the development of IPOD, the thesis proposed asoftware-hardware co-design platform. After the development of IPOD the thesischange this software-hardware co-design platform to a product.This software-hardware co-design platform is made up of three parts: hardware,driver and application. We use PowerPcb program to design hardware and finishedthe design of power supply network, power feedback network of the TUNER module,configure network of FPGA, PCI circuit and test network. Finally we evaluated theperformance platform and compare with other. Driver and application are alldeveloped with Visual C++. This thesis analyzes the hierarchy of the system andfunction and discusses the work flow of the NIC. The thesis also dissertate thecommunication between the driver and the application. Finally we dissertate theimplementation of this software-hardware co-design system.During the design of the product, we focus on high-speed PCB design and PCBboundary scan. The work of high-speed PCB design can ensure the stability ofproduct. We also discuss the Electromagnetic Compatibility (EMC) and signalintegrality. The PCB boundary scan technology can supply a convenient function inquality control during production.This thesis attempt to use EP1C3 to take the place of EP1C6. We analyzes thecompatibility between the 5V PCI bus and 3.3V I/O, discusses the work principle ofclamp diode point out the different of high-speed diode and common diode.The software-hardware co-design platform has been successfully used in thedevelopment of IPOD, and the product base on this software-hardware co-designplatform has been finalize the design.

Related Dissertations

  1. Research on Electromagnetic Acoustic Transducer Detection System Based on FPGA,TH878.2
  2. Study on Drive and Control System of Five-Phase PMSM Based on FPGA,TM341
  3. Development of LXI Arbitrary Waveform Generator,TM935
  4. Design of Digital Predistorter for RF Power Amplifier Based on FPGA,TN722.75
  5. Synchronization and Channel Estimation Algorithm in Bursted OFDM System and Its Implementation on FPGA,TN919.3
  6. Performance Analysis of Anti-Multipath Capability in DSSS System and Study on the Compensation Methods,TN914.42
  7. Optimizing and Realising Research on Vedio Compression in TV Guidance System,TN919.81
  8. Research and Hardware Simulation of Multiuser Spread Spectrum Code Acquisition Based on FPGA,TN914.42
  9. Research on Basic Algorithms of Digital Image Processing and Implementation with FPGA,TP391.41
  10. Research of High Speed Image Pre-processing System Based on FPGA,TP391.41
  11. Design of High-Speed Digital Image Acquisition and Interface Based on FPGA,TP274.2
  12. Development of Inductance Sensor Data Acquisition System Based on FPGA,TP274.2
  13. Development of Serial Bus Analyzer Based on Nios,TP274
  14. Development of PMC High-speed Data Transmission Board Design Based on FPGA-RocketIO_X,TP274.2
  15. Development of Pxibus High Performance Digital I/O Module,TP274
  16. Development of LXI Counter,TP274
  17. A High-Speed and Real-Time Data Acquisition System Based on FPGA,TP274.2
  18. Design of GPS Information Receiving System Based on Nios Ⅱ,TN967.1
  19. Temperature and pressure explosives temperature field memory test technology,TQ560.7
  20. Erbium-doped fiber amplifier pump laser drive source research applications,TN248
  21. Remote FPGA system design and implementation of security upgrades,TP309

CLC: > Industrial Technology > Radio electronics, telecommunications technology > TV > Transmission of television signals > Satellite transmission of television signals
© 2012 www.DissertationTopic.Net  Mobile