Dissertation > Excellent graduate degree dissertation topics show

Tooth Profile Modeling and Machining Error Analysis of the Face Gear

Author: CaoQiZhang
Tutor: ChenMing
School: Harbin Institute of Technology
Course: Mechanical Design and Theory
Keywords: face gear tooth profile modeling error analysis path of action
CLC: TH132.41
Type: Master's thesis
Year: 2008
Downloads: 154
Quote: 0
Read: Download Dissertation


Face gear drives,declared in last century 40s but developing in the recent ten years,is a new type of gear drives compared with other traditional gear drives in many areas. Overseas scholars including Litvin had contributed to the deve1opment of face gear drives,and found out that face gear drives have many advantages applied in helicopter transmissions. In mainland face gear drives were studied little,and almost were not used actually. So it is important to research face gear drives for the development of the gear drives.This paper researches on the face gear drives composed of a face gear and a spur involute pinion. Based on the surface equation of the pinion, the equation of the face gear is obtained according to the differential geometry theory. With the analysis of the model ,the conditions of undercutting and pointing were studied,and the radius of un-undercutting and un-pointing are obtained. Three-dimensional model of face gear drives are built in Pro/e.According to theory of Litvin, the contact points on the surface of the face gear drives are analyzed, also the patch of the points on the surface of the face gear and pinion are emulated with Matlab program. Considering of the machining principles, the perpendicular face gear generation assistant equipment based on YM5150A gear shaper is designed and its three-dimensional model is built in Pro/e.Based on the equation of the face gear , the machining errors including the crossing eagle error between the face gear and pinion axes、the pressure eagle error of the gear shaper cutter、the transmission error and the geometry eccentricity error are studied. The results show that the crossing eagle error results in the shift of along the tooth depth, while the geometry eccentricity error results in the shift of along the tooth thickness. The two both have no effect on the tooth form. The other two the pressure eagle error of the gear shaper cutter and the transmission error have effect on the pressure eagle of tooth surface. Also, the tooth thickness is changed by these two errors.

Related Dissertations

  1. Error Analysis and Measurement Method Design for the Hemispherical Resonator Gyro,V241.5
  2. English -speaking Chinese learners willing verb bias analysis,H195
  3. Error Analysis of Students’ English Writing in Vocational College,H319
  4. The Error Analysis and Teaching Strategy of "Ba" Sentences to Foreign Students,H195
  5. Error Analysis of Prepositions and Its Teaching Strategy for Primary Stage of Korean Learners in Learning Chinese,H195
  6. The Study of the Chinese Sentence Structure "Shi……de" in the Chinese Language Teaching for Korean Students,H195
  7. Chinese Personal Affix (Quasi-affixes) in Teaching Chinese as a Foreign Language,H195
  8. Analysis on the Biased Errors of Word Order in Written Expression of Foreign Students,H195
  9. The Research of Detachable Words and Teaching Chinese as a Second Language,H195
  10. Research of the Chinese pronunciation of the Russian students,H195
  11. The Verb Words of Seperable Word Research and Foreign Language Teaching,H195
  12. A Corpus-driven Comparative Study of Uses of TAKE,H319
  13. Elementary level of Thai students \,H195
  14. A Study of Some Analysis Properties for Fractal Interpolation Functions,O174.42
  15. Study on Methodology and Application of Total Pollutant Load Assessment in Water Environment,X832
  16. The Experimental Research on Measurement of Thermal Contact Resistance of Two Contacted Solids and Thermal Conductivity,TK124
  17. Metrological Standard Device of Heavy Direct Current,TM835.2
  18. The Analysis of Foreign Students’ Chinese Characters Acquisition Error and Teaching,H195
  19. Study of Elementary Chinese Phonetic Teaching in Madagascar,H195
  20. The Error Analysis of Measure Words Used by Foreign Students in the Primary Stage,H195

CLC: > Industrial Technology > Machinery and Instrument Industry > Mechanical parts and gear > The transmission mechanism > Meshing > Gears and gearing
© 2012 www.DissertationTopic.Net  Mobile