Dissertation > Excellent graduate degree dissertation topics show

Study and Design of Hydraulic Data Acquisition System Based on CPLD

Author: HuangJianQuan
Tutor: LiuZhong
School: Hunan Normal University
Course: Circuits and Systems
Keywords: Hydraulic DAQ CPLD USB2.0 LabVIEW VISA
CLC: TP274.2
Type: Master's thesis
Year: 2006
Downloads: 404
Quote: 0
Read: Download Dissertation

Abstract


Data acquisition system is an essential section of the signal and information processing. It offers data for equipment running in the course of monitoring and fault diagnosis of hydraulic device. And the result of diagnosis is directly depended on the acquisition technique. Thus, a high-powered hydraulic DAQ system will make equipment maintenance informational and intelligent, and will farther largely prevent the loss of money and casualties that may be caused by failure of hydraulic equipments.According to the characteristic of hydraulic equipment and the requirement of fault diagnosis, this thesis develops the hardware and software system based on the USB2.0 communication technology and virtual instrument technology. This system adopts FX2 plus CPLD architecture and pipelining collection technology, which has friendly interface and costs a little. The DAQ system realizes functions of real time data acquisition, display, storage and digital filtration, providing accurate and effective data for monitoring and diagnosis. The key point of this thesis is as follows:(1) The design of hardware circuits and CPLD(Complex Programmable Logic Device) program divides real time DAQ process into three modules including A/D conversion, data buffer storage and data transmission. It’s executed under the control of CPLD hardware and the MCU (Micro Control Unit), to realize high-speed data acquisition at low main-frequency CPU.(2) According to the characteristics of FX2 (CY7C68013) structure, the firmware is programmed by Keil C51. It completes the main control of DAQ system and USB2.0 communication.(3) In the aspect of software, application programs and USB drive based on LabVIEW are designed adopting NI-VISA. Through keyboard and mouse, the control and processing of data acquisition can be achieved effectively.(4) At last, precision test and dynamic application test have been done for the whole system experiment.The experimental results prove that the application program works exactly well under our high-speed hydraulic DAQ system, and the data acquired can reflect the precise condition of the device, which is up to the requirement in design of acquisition speed and precision.

Related Dissertations

  1. Image Analysis System of Metal Transfer of Gas Metal Arc Welding,TG444
  2. Research on the Image Acquisition System Based on CMOS Star Sensor,V448.2
  3. Research on Nozzle Plume Temperature Distribution Measurement System,V434
  4. Research on Synchronous Motor Excitation Control System,TM341
  5. Research on the Optimization of Laser Triangulation Device,TH744.5
  6. Design the Control System of Ocean Wave’s Simulation Table Based on Theory of Fuzzy Turning PID,TP273.4
  7. A High-Speed Data Acquisition System Based on USB2.0,TP274.2
  8. The Electrostatic Dust Removal System Based on Microcontroller and LabVIEW,X701.2
  9. Oil -in-water type emulsified oil water hammer harmonic LabVIEW Simulation and Experimental Research demulsification,X703
  10. LabVIEW-based virtual oscilloscope design and remote control,TM935.3
  11. Axial fan blade vibration non-contact measurement,TD441.2
  12. Exploration and Analysis of Electronic Detection of Raw Silk’s Flatness,TS147
  13. Control System Research for a Nano-Material Mixer,TP273.5
  14. Simulation System for Aluminum Foil Cold Mill and Research of Tension Control,TG334.9
  15. Research and Application of Remote Virtual Instrument Experimental Teaching System Based on LabVIEW,TP391.6
  16. Design and Implementation of Interface Board for 340MHz Wireless Transceiver,TN859
  17. Multi-channel Real-time Online Monitoring System for Polymerizers,TP274
  18. Design of Photoelectric Conversion and Data Acquisition System Based on USB2.0,TP274.2
  19. Research on Thin-Film Hysteresis Loop Measurement System Based on Extraordinary Hall Effect,O484.43
  20. The Research and Design of a Fire Detection System Based on Combustion Audio Recognition,X924.4
  21. Research of Control Strategy Based on the Electro-hydraulic Proportional Position Control System,TH137.52

CLC: > Industrial Technology > Automation technology,computer technology > Automation technology and equipment > Automation systems > Data processing, data processing system > Data collection and processing systems
© 2012 www.DissertationTopic.Net  Mobile