Dissertation > Excellent graduate degree dissertation topics show

RS-232 communication interface chip in 0.6um technology Design and Implementation

Author: WuXian
Tutor: SunYing；ZhuDaZhong
School: Zhejiang University
Course: Microelectronics and Solid State Electronics
Keywords: Communication standards Modern sensor Transmission circuit Serial communication Performance indicators IC Slew rate Data rate Delay time Functional circuit
CLC: TP212.6
Type: Master's thesis
Year: 2006
Downloads: 266
Quote: 5
Read: Download Dissertation

Abstract


Modern sensor device is developed facing the direction of intelligent and netlization. One of the key problems of the smart sensor device is the data communicating function. When the main sensor IC based on 0.6μm standard CMOS technology communicates with computer RS-232 series port, It is necessary to use monolithic RS-232 series IC to realize the exchange of the communication levels. If RS-232 communication circuit block can be integrated compatibly in sensor IC chip monolithically, it is possible to realize the smart sensor IC with data collecting function, analysis function and communicating function. To realize this idea, the first important research is to design a RS-232 communication circuit using 0.6μm standard CMOS technology.For the characteristics and performances that RS-232 transmitter/receiver should have, it is more suitable to be fabricated in 3μm CMOS or bipolar processes that have high voltage compression resistance (about 20V). Many structures of the circuit are not compatible with 0.6μm standard CMOS process. The biggest trouble is the voltage compression resistance problem of the devices, when we want to implement circuits which used to be designed in bigger-size processes. There is 20 volts voltage drop in RS-232 transmitter/receiver, and this value is far beyond the breakdown voltage of the gate oxide, which is only 10 volts. We must realize the RS-232 transmitter/receiver in Shanghua 0.6μm standard CMOS process by adjusting the circuit structures other than the process layers. The circuit is composed of two parts: inverting and non-inverting voltage doubler and transmitter. According to the RS-232C standards, the voltage doubler should supply DC voltages higher than ± 5V to the transmitter. The transmitter should transform data, as fast as 200kbps, from TTL/CMOS mode to EIA/TIA RS-232C mode. The slew rate should be higher than 30V/μs, and the delay time should be shorter than 1.5μs.In this research sensor IC I/O chip with RS-232 series driver/receiver function is designed and fabricated without any changes of 0.6μm standard CMOS process by reasonable adjusting the circuit configuration, the chip area is 4 mm~2. Voltage doubler supplies 7.6V non-inverting voltage and -5.6V inverting voltage to transmitter, when supplies by 5V DC voltage source. With 3KΩ resister and 1000pF capacitance loaded, the transmitter can transmit data as fast as 230.4kbps. The delay time and slew rate parameters are all fit or beyond the RS-232C standard. The circuit can replace some chips of a kind in some conditions. It costs less, and is smaller in size, easier to be realized in standard process, that is just what we want to get from modern electronicproducts. When integrated with sensors, it can help to communicate with PC terminals by changing the voltage mode, so that the entire system becomes a more intelligent one.

Related Dissertations

  1. Design of High-Speed Digital Image Acquisition and Interface Based on FPGA,TP274.2
  2. Development of Serial Bus Analyzer Based on Nios,TP274
  3. Construction of G Bank Yunnan Branch Office of Performance Management System,F272.92
  4. Intrusion detection based on the ultrasonic echo envelope in the military security patrols,E919
  5. The Study on the Preparation of McAb to Anti-Melemine and Establishment of Ic-ELISA for Detetion of Melamine,S859.84
  6. CAN bus technology in the meteorological monitoring System Research and Implementation,P409
  7. Tax Planning of Integrated Circuit (IC) Enterprise,F406.72
  8. Research on the Strategy Choice of G Corporation,F426.6
  9. Design of Digital Intelligent Terminal System Doorstation,TP368.1
  10. Design and implementation of the management system of party members card,TP311.52
  11. Design of the EEPROM Trimming Circuit for the Integrated ATCXO,TP333
  12. Based on the design and simulation of the ADuC845 strain test data acquisition software,TP274.2
  13. Aerocraft Simulator Servo System Controlling & Parameter Tuning Techniques,V249.1
  14. Design and Implementation of Centralized Controller for Modular Photovoltaic Inverter,TM464
  15. Research of Optical Lightning Image Monitoring System,TP274
  16. Research and Application of OTTV in the Cold Winter and Hot Summer Region,TU831
  17. A Study of the Research from Home and Abroad on "Intercultural Competence" and "Intercultural Communication Competence" (2001-2010),H319
  18. Research on Performance Management System of NY Secondary School Based on BSC+KPI,G637
  19. ZXGJ Risk of Purchasing and Supply Company,F426.6
  20. University of Electronic Science and Technology Institute , Zhongshan Parking Information Management System Design and Implementation,TP311.52
  21. HJ Logistics Performance Management,F259.23

CLC: > Industrial Technology > Automation technology,computer technology > Automation technology and equipment > Automation components,parts > Transmitter ( converter),the sensor > Intelligent sensors
© 2012 www.DissertationTopic.Net  Mobile