Dissertation 

About 259 item dissertation in line with Motion controller query results,the following is 1 to 50(Search took 0.084 seconds)

  1. Research on Multi-axis Motion Controller Based on CAN Bus,LiGang/Xi'an University of Engineering,0/42
  2. Research on Dedicared Multi-axis Motion Controler and the Control Method Built in,DuWei/Harbin Institute of Technology,0/79
  3. Design of Embedded Motion Controller Based on ARM and Motion Control Chip,ZhangYongZuo/Harbin Engineering University,0/84
  4. The Design of Embedded Software for Motion Controller Based on DSP,WangHuiJie/Huazhong University of Science and Technology,0/13
  5. Modeling and Implementation of Motor Function Module Based on PLCopen,ZhaoMingFeng/Huazhong University of Science and Technology,0/12
  6. Design of Industrial Ethernet Motion Controller Based on ARM,WangRui/Harbin University of Science and Technology,0/14
  7. Design of EtherCAT Based Multi-axis Motion Controller,RongAiQiong/South China University of Technology,0/86
  8. Application of Robot in Profiled Tank Welding Based on DSP Multi-axis Motion Controller,JiaJia/Jinan University,0/8
  9. Design of Cutting Robot System Platform Based on ARM,QiChong/Harbin Engineering University,0/32
  10. Design of Digital Punching System Based on Image Guide,ZhangXiongHui/Huaqiao University,0/2
  11. Development and Wind Turbine Control Application of Soft Motion Controller Based on Embedded PLC,ShenChao/Xiangtan University,0/52
  12. Hardware Design of Motion Control System for Magnetically Levitated Planar Motor,LeiJiaKe/Huazhong University of Science and Technology,0/9
  13. Electrical Control System Design of Full Servo Shaftless Flexograph Machine,LiFangYuan/University of North,0/4
  14. Design and Implementation of Motion Controller Based on Nurbs,WenHuaFeng/Harbin Institute of Technology,0/35
  15. Design of Open Control System Based on GTS Motion ControlCard,HuXueLong/Shihezi University,0/36
  16. Design and Development of Special CNC for PCB Drilling Machine,MaJie/Nanjing University of Aeronautics and Astronautics,0/17
  17. Research on Interpolation Pre-processing Modules in CNC System of Grinder for Complex Tool Type Surface,ChenQingXia/Central South University,0/12
  18. Design of Open CNC with Flame Cutting Based on Motion Controller,DongZhen/Shihezi University,0/74
  19. Development on Punch-CNC System Based on General Motion Controller,FuGang/Jinan University,0/11
  20. Research and Realization of Motion Control Technology of Wave Maker,LiuHongWei/Tianjin University of Science and Technology,0/31
  21. Design and Research of Four-Axis Motion Controller Based on DSP and FPGA,ShiJiangHua/Beijing University of Posts and Telecommunications,0/169
  22. The Research on Open Motion Controller and Interpolation Technology,ShiPingZheng/Hangzhou University of Electronic Science and Technology,0/72
  23. The Design and Application of a Class of General Controller,RenBaoSheng/Qingdao University of Science and Technology,0/30
  24. The Design of a Multi-interface Motion Controller,ChenPeng/Huazhong University of Science and Technology,0/19
  25. Design on Hardware System of Reconfigurable Multi-Axis Motion Controller,LiuFei/Harbin Engineering University,0/36
  26. Design and Research of Four-axes Motion Controller Based on Modbus Communication,ZhangJian/Chang'an University,0/27
  27. Design of Independent-axis Motion Controller for Industrial Computed Tomography,ShiYanHua/Chongqing University,0/37
  28. Movement and Positioning Industrial Ethernet Control Technology of Multi-axis Linear Motor,ZhangLianDi/Hefei University of Technology,0/60
  29. Research&Development of the Motion Controller Based on LM628,RaoHao/Harbin Institute of Technology,0/7
  30. Study of high speed DSC controller based on TMS320F28335,SunXingPeng/Yantai University,0/164
  31. Design of Motion Controller and Research of B-Spline Curve Fitting,FanDeHe/South China University of Technology,0/272
  32. Research and Design on Motion Controller in Open Numerical Control System Based on DSP,JiangLongFei/South China University of Technology,1/291
  33. The Design and Research of Stand-alone Embedded Motion Controller Based on STM32and FreeRTOS,XiePengCheng/South China University of Technology,2/407
  34. The Path-Planning and Design of GD-1Rosin-Welding Robot,ChenSaiQing/North China University of,0/38
  35. Embedded Motion Controller Design and Servo Control Algorithm Research,LinShiYao/Harbin Institute of Technology,0/17
  36. Research on Open Architecture Robot Motion Controller Based on DSP and FPGA,LinZuo/South China University of Technology,0/68
  37. Development of Six Degrees of Freedom Open Robot Control System Based on CPAC,XuYang/Guangdong University of Technology,0/108
  38. The Design of Motion Control System for Industrial Robot with Six Degrees of Freedom Based by DSP and FPGA,ChenYuXi/Dalian University of Technology,0/269
  39. The Application of GA-hopfield Neural Network in Multi-axis Control System,WangChaoHui/Hunan University,0/79
  40. Design and Implementation of Motion Controllor for the Large-format Scan and Inkjet Integrative Machine,ShengJiaBo/Xi'an University of Electronic Science and Technology,0/24
  41. The Research of Motion Controller System Based on DSP,XuYuanZe/Southwest Jiaotong University,0/85
  42. The Development and Design of Multi-axis Motion Controller Based on ASIC,LiHui/Wuhan Institute of Technology,0/1
  43. Design and Development of Control System for Flexible Transport Vehicle,LiangJiaLiang/Nanjing University of Aeronautics and Astronautics,0/33
  44. Research and Realization of the Full Automatic High-speed Sealing Machine Control System,PuXiaoLong/Chang'an University,0/62
  45. The Research of Open CNC System Based on GT-controller,PengQuanHai/Dalian Jiaotong University,0/45
  46. The Design of Open Motion Controller Based on Processing Integration,GaoRenFu/Shandong University,0/8
  47. The Research of Large Ingot Processing NC System Based on the Motion Controller,GuoBo/Henan University of Science and Technology,0/22
  48. Based on DSP6711Motion Controller Research NURBS Curve Interpolation Algorithm,ZhangJianXun/Chongqing University,0/56
  49. The Design and Implementation of NC Code Interpreter Based on Network Engraving Machine,LiuDangXiao/Xi'an University of Technology,0/49
  50. Research and Implimentaion for Key Algorithms of Motion Controller Based on DSP,ChenWeiNa/South China University of Technology,3/422

Total 6 Pages First Previous 1 2 3 4 5 6 Next Last

© 2012 www.DissertationTopic.Net  Mobile