Dissertation 

About 132 item dissertation in line with Punch-through query results,the following is 1 to 50(Search took 0.041 seconds)

  1. The Research of Lower Limb Special Strength Characteristics of Boxing and Development of Accessorial Strength Training Equipment,SuYanJu/Shanghai Institute of Physical Education,0/142
  2. Research on the Comparison of Experimental Biomechanics of Martial Arts and Kick Boxing Athletes after Punching Effect,ChengGuoHai/Shanghai Institute of Physical Education,0/72
  3. On Ultimate Bearing Capacity of Jack-up with Square Spudcan and Application to Structure Investigation Against Punch-through,ZhangAiXia/Dalian University of Technology,0/54
  4. Research on Risk Assessment Method of Jack-up Drilling Unit,LinYi/Harbin Engineering University,0/53
  5. Research on Deep Micro-hole Machined by Edm with High-speed Spindle,LiZhen/Harbin Institute of Technology,0/91
  6. Research on Environmental Worthiness Technology of CNC Punch Press,SunXiaoDing/Chongqing University,0/33
  7. Study of Influence of Punch Speed on Sheet Metal Forming Based on Servo Press,YuJianJun/Hefei University of Technology,0/62
  8. Development on Punch-CNC System Based on General Motion Controller,FuGang/Jinan University,0/11
  9. Research on Hydropiercing-flanging,HaoJing/Harbin Institute of Technology,0/70
  10. Multi link high-speed punch structure optimization design and dynamic balance analysis,SunZuoZuo/Nanjing University of Technology and Engineering,0/37
  11. Forming Properties at Elevated Temperature of Ni Foil Electrodeposited,ZhaoZhiPeng/Harbin Institute of Technology,0/31
  12. Jack-up Rig Footing Penetration Prediction and Punch-through Analysis and Research,WangJinBiao/Tianjin University,0/9
  13. Henan Mind Fist of Nonmaterial Cultural Heritage Inheritance Mechanism Research,DongFengWei/Hubei University,0/128
  14. Simulation Method Research for Precision Spade Punch Planter by DEM,XueHongDa/Shenyang University of Technology,0/53
  15. Establishment of MSP and Its Application in PZT Ceramics under Multiple Coupling Field,DengQiHuang/Donghua University,0/53
  16. Research on Life Assessment Method Considering Constraint Effect for P92Pipe with Defects at Elevated Temperature,ZhaoLei/Tianjin University,0/110
  17. Research on the On-line Small Punch Tests Device and Its Experimental Investigation,DuanHuiJin/Xi'an University of Technology,0/20
  18. Study on the Mechanical Behavior of Austenitic Stainless Steel Welding Joint after Codestretching,YangKaiYu/East China University of Science and Technology,2/114
  19. Study on Compound Bulge Forming Process and Experiment of Multi-branch Tubes Using Rubber,ZouQianSheng/Huaqiao University,0/18
  20. Study on the turret punch press control system software of CNC,Ping/Yangzhou University,0/16
  21. Research on reliability design technology of main drive system of high speed punch,LiTaiFu/Nanjing University of Technology and Engineering,0/171
  22. Research and Development of the Control System of CNC Turret Punch Press,YuXiaoYang/Nanjing Agricultural College,0/23
  23. Research on the Fault Analysis Technique for CNC High-speed Punch Press,HuangZhaoZhe/Jilin University,0/46
  24. Metal Sheet Air Bending Model and Experiment Research,ZhangYi/Huazhong University of Science and Technology,0/55
  25. Research on Rapid Design Technology of Forming Die for Sheet Metal,YangYanZhou/Nanjing University of Aeronautics and Astronautics,0/80
  26. Study on the vibration and noise control of NC revolving tower punch,ChenZuo/Yangzhou University,1/80
  27. Study on the technology of high speed punching failure and reliability analysis,LiuYongFeng/Nanjing University of Technology and Engineering,0/79
  28. Reliability Analysis and Control Key Technologies Research of Purchased Parts for Punch Press,ChenZuoYu/Chongqing University,0/90
  29. Mechanism Study on the Extrusion of Bending Pipe with Many Punch Actively Controlled,FengZhiLong/Tianjin University of Technology,0/47
  30. Research on Irradiation Performance of SCWR Cladding Materials Using Small Sample Testing Technology,QianZuo/North China Electric Power University,0/65
  31. Creep Life Evaluation Research on1.25Cr0.5MoSi Material,SunHaiSheng/East China University of Science and Technology,0/72
  32. Study on Effects of Microstructure and Thickness of Specimen on Small Punch Testing,SongMing/East China University of Science and Technology,1/119
  33. The Numerical Simulation Based on the Residual Stress and Defect Fracture in Small Punch Specimen,WangYaoGang/East China University of Science and Technology,0/24
  34. A Test Study and Finite Element Analysis about Corrugated Box Compression Strength,JiaLiPing/Shaanxi University of Science and Technology,0/153
  35. Numerical Simulation of Damage and Fracture in Small Punch Specimen Containing Defects,WangXu/East China University of Science and Technology,0/50
  36. Study on Strength Parameter of Hard Structural Plane and Engineering Technique for Consequent Slope,JiFeng/Chengdu University of Technology,2/585
  37. A 3-Dimensional RITSS Large Deformation Finite Element Method and Its Application on the Foundation Punch-through Failure and Plate Anchor Uplift Resistance Problems,YuLong/Dalian University of Technology,1/223
  38. Research of Small Punch Creep Testing Method,ChenGang/Wuhan University of Technology,2/204
  39. Study on Rim Indenting Puncher Based on Reconfiguration,TianBo/Chongqing University,0/159
  40. The First Exit Time of the Brownian Motion and Mills’ Ratio,LuDaWei/Dalian University of Technology,0/90
  41. To Investigate the Treatment of Female Acne Vulgar by TCM Regulation of Liver-Kidney and Chong-Ren Meridian,LiMin/Guangzhou University of Traditional Chinese Medicine,1/328
  42. Research of Solid Melting on the Ram-Punch Extruder,LiWeiWei/Beijing University of Chemical Technology,5/56
  43. CNC punch Based on FTA importance analysis,HanZuo/Jilin University,7/217
  44. Failure Analysis of Die Casting Machine Punch and Development of Austempered Ductile Iron Punch,ZhangLiWen/Jilin University,1/109
  45. A Observation of Treatment of Modified Three Leaf Decoction on Postnasal Drip Syndrome (PNDs) and Chronic Cough,HuangChunMei/Guangzhou University of Traditional Chinese Medicine,2/118
  46. The Research on the the Test System for Punch of CNC,XuMingMing/Lanzhou University of Technology,1/212
  47. Assessment of the Local Mechanical Properties and the Damage Study for the Aluminium Alloy Welded Joints,WangZhiCheng/Lanzhou University of Technology,1/231
  48. Research on Environment Vibration Induced by Bridge Pile Foundation Construction,ZuoTingLe/Beijing Jiaotong University,3/144
  49. Design and Research of CNC System for Turret Punch Press and Other Key Technology,WangFei/Xiamen University,4/222
  50. The Study and Application of CAD/CAM System of Flexible Sheet Metal Base on KBE,ZhangYunFeng/Shanghai Jiaotong University,3/176

Total 3 Pages First Previous 1 2 3 Next Last

© 2012 www.DissertationTopic.Net  Mobile