Dissertation　

About 168 item dissertation in line with indentation query results,the following is 1 to 50(Search took 0.069 seconds)

  1. Mechanism of Rock Cracking under Indentation and Primary Investigation on Spacing Optimization,LiuJiPeng/Tianjin University,0/2
  2. Study on Mesoscopic Characteristic of Asphalt Mixture Based on Particulate Matter Mechanics,ChangMingFeng/Chang'an University,0/109
  3. Experimental Study of Spontaneous Magnetic Flux Leakage Signals of Type LZ50Axle Steel,HuangTing/Beijing Jiaotong University,0/17
  4. Research on Fatigue Performance of High-speed Railway Track Connector,LiHuaRong/Wuhan University of Science and Technology,0/38
  5. Research of Ultrasonic Shot Peening Forming Technology in Curved Surface Parts,ShiXueGang/Nanjing University of Aeronautics and Astronautics,0/9
  6. Research of Ultrasonic Shot Peening Technology in Straigthening,ChenXing/Nanjing University of Aeronautics and Astronautics,0/4
  7. Macroscopic Indentation Test Mechanism and Finite Element Simulation of Bamboo and Bamboo Floor,GeJianChun/Nanjing Forestry University,0/14
  8. A Depth-sensing Indentation Based Study of the Distribution Characteristics of the Residual Stress Field of an Al-Li Alloy Plates Subjected to Shot-peening,ZhangShuo/Zhejiang University,0/25
  9. Research on Mechanism of High Speed Point Grinding and Experimental Study of Point Grinding Processing of Difficult-to-grinding Materials,CaoZhenXuan/Northeastern University,0/5
  10. Study on the Interfacial Reaction and Performance of Sn-1Zn-XAg/Cu,ZhouShuai/Harbin University of Science and Technology,0/8
  11. Research on Glass Forming Ability of Al-Ni-Zr/Ce Alloy and Its Mechanical and Electrochemical Properties,LiXiaoFeng/Central South University,0/14
  12. Investigation of Amorphous Ni-W-P Alloy Prepared by Jet Electrodeposition,KangShaoMing/Yanshan University,0/0
  13. Numerical Simulation for Failure Mechanism of Hard Thin Films/Ductile Substrates System under Contact Load by Using the Cohesive Model,ZhouYingQiang/Zhejiang University of Technology,0/10
  14. Study on Multiscale Mechanics and Tribological Behavior of DLC Film in Silicon Nitride Ceramic Bearings,LiJun/Harbin Institute of Technology,0/49
  15. Study on structure and properties of Al/Al2O3 nano multilayer films,ZhuXueZuo/Kunming University of Science and Technology,0/47
  16. Research on the Indentation Size Effect of Hardness of Porous Composite,TangZuo/Tsinghua University,0/7
  17. A Study on the Residual Stresses Around the Crack Tip Based on the Depth-sensing Indentation Technique during Fatigue Crack Growth,XiaoLei/Zhejiang University,0/9
  18. Research on Simulation and Experiment of Grinding Optical Glass with Single Diamond Girt,LiZhiPeng/Harbin Institute of Technology,0/73
  19. Study on the Mechanism of LCD Glass Cutting with Double Wheel,QingJianBo/South China University of Technology,0/34
  20. Molecular Dynamics Simulations and Experimental Study on Nano-indentation of Fused Silica,WangKun/Harbin Institute of Technology,0/66
  21. Research on Mechanical Behavior of the Photonic Crystal Thermal Control Coating,LiTianLong/Harbin Institute of Technology,0/26
  22. Investigation on the Relationship among Microstructure, Chemical Bonding State，stress, Hardness and Tribological Properties of ZrN and ZrC Films,MengQingNan/Jilin University,0/126
  23. Research on Room-Temperature Rheology-Mechanical Behavior of Bulk Metallic Glasses at Micro-and Nano-Scale and Its Mechanism,XuFu/Xiangtan University,0/77
  24. Research and Expeirment of Multidimensional Micro Force Sensor Used for Indentation/Scratch Test,WanShunGuang/Jilin University,0/41
  25. Research on Brinell Hardness Measure Based on Machine Vision,DongJian/Inner Mongolia University of Science and Technology,0/27
  26. Research on the Surface Traces of the Photovoltaic Structure Based on Machine Vision,YuLei/Jiangnan University,0/1
  27. Simulation and Experimental Study on Nano-machining of Monocrystal Silicon,YuZuo/Harbin Institute of Technology,0/13
  28. Study on the Fracture Mechanisms of All-Ceramic Crown Restorations,LuChengLin/Shanghai University,0/107
  29. Investigation of Morphology and Mechanical Properties of NSCLC Cells Based on Nano-indentation,LiYa/Harbin Institute of Technology,0/4
  30. Optimization Investigation on Nanocrystalline Silicon Thin Film Solar Cells,GuoLiQiang/Jiangsu University,1/356
  31. Parametric Study on the Impact Responses of Composite Laminates Based on Finite Element Method and Analytical Model,YiPengYue/Shanghai Jiaotong University,0/45
  32. Design and Experimental Research of an in Situ Nano-indentation and Scratch Testing Device,MiJie/Jilin University,0/88
  33. Experimental Study on Machinability and Grinding of Aspheric Lens,YaoGuang/Harbin Institute of Technology,0/0
  34. The Development of Complex Belt Conveyor Design and Calculation Software,WangBo/Northeastern University,0/56
  35. Analytical Modeling of Plastic Response of Sandwich Constructions under Localized Indentation and Bending,XieZhongYou/University of Science and Technology of China,1/51
  36. Gradient Design and Application of Self-lubricating Ceramic Tool Material,ZhangYongLian/Shandong Institute of Light Industry,0/75
  37. Research of High-energy Ultrasonic Shot Peening Technology in Sheet Metal Forming,GaoLin/Nanjing University of Aeronautics and Astronautics,0/65
  38. Study on the Grinding Mechanism of SiCp/Al Composites,WangFuSong/Shenyang University of Technology,0/67
  39. Study of Interfacial Microstructure Evolution and Nano-Indentation Properties of Sn-9Zn/Cu Joints,ChenYongSheng/Harbin University of Science and Technology,0/16
  40. Relationship between the Surface Layer Mechanical Properties of Austenitic Stainless Steel with Corrosion Failure,LiDongLiang/Beijing University of Chemical Technology,0/123
  41. Structure Evolution and Mechanical Properties of Ni60Alloy Laser Cladding Layer,YaoYuan/Yanshan University,1/140
  42. Effect of TaC Content on Thermal Shock Resistance of Ti(C,N)-based Cermets,DaiHongXia/Huazhong University of Science and Technology,0/28
  43. Microstructure, Mechanical Properties and Creep Behavior of Mg-Gd-Y-Zr Alloys,YuanJie/Shanghai Jiaotong University,0/105
  44. Effects of Additives on Microstructure and Properties of Extra Coarse, Super Extra Coarse Carbide and Co Binder Phase,ChengZuo/Central South University,0/165
  45. Research on the Measurement of Mechanical Properties of Structural Steels and Those Affected by Strain Aging through Automated Ball Indentation Test,TangJie/Shandong University,0/33
  46. Design and Experiments of Micro/nano-indentation Platform at Elevated Temperature,GengChunYang/Jilin University,0/54
  47. Mechanical Behaviors of Closed-cell Aluminum Foams and Sandwich Panels at Elevated Temperatures,LiZhiBin/University of Science and Technology of China,0/117
  48. Study on the Measurement of Thin Film’s Young’s Modulus Using LG/LD Surface Acoustic Waves,JinBaoYin/Tianjin University,0/66
  49. Indentation Anaysis of Piezoelectric Materrals and Quasicrystals,WuYeFei/Zhejiang University,0/90
  50. Damage Resistance of Low Velocity Impacted on Foam-core Sandwich Structure Composites,CaiJianLi/Nanchang University of Aeronautics and,0/119

Total 4 Pages First Previous 1 2 3 4 Next Last

© 2012 www.DissertationTopic.Net  Mobile