Dissertation　

About 76 item dissertation in line with TF124.39,Other molding query results,the following is 1 to 50(Search took 0.086 seconds)

  1. Research on Deposition Growth Mechanism and Parameter Optimization of Double-nozzle Spray Forming,LiuTeng/Nanjing University of Aeronautics and Astronautics,0/4
  2. Study on the Gas Flow Field in Spray Deposition and the Breakup Mechanism,ZhaoWenJun/Harbin Institute of Technology,0/102
  3. Numerical simulation study of mold filling process in powder co-injection molding using second unit formart and genetic algorithm,FengJuan/Central South University,0/18
  4. Study on Microstructure and Properties of Precession Spray-formed HM1Steel,WangCunLong/Guangdong University of Technology,0/38
  5. Numerical Simulation of Shape Evolution of Tubular Preform in Spray Forming Process,XiangJinZong/Inner Mongolia University of Science and Technology,0/24
  6. Fabrication of Low Cost Ti-6Al-4V Alloy by Metal Injection Molding and Its Thermohydrogen Processing,ZhouWei/Hunan University,0/47
  7. 316L Stainless Steel Powder Injection Molding Process,ZhangXin/Shenyang University of Technology,0/83
  8. Research on Process of Powder Injection Molding of Cu-Fe-C Friction Materials and Performance Analysis,ZhouHaiXia/Jiangsu University of Science and Technology,0/94
  9. Spray forming tissue formation simulation of billet shape,HuoGuang/Kunming University of Science and Technology,1/257
  10. Numerical Simulation and Application of Powder Injection Molding Filling Process,ZhengZhouShun/Central South University,3/277
  11. Investigation on System for Laser Micro Fabrication with Metal Powder,WangXuZuo/Beijing University of Technology,3/448
  12. Numerical Simulation on Metal Injection Moulding,ChengZhiQiang/Southwest Jiaotong University,1/338
  13. Injection Molding of High Performance Anisotropic Nd-Fe-B Bonded Magnet,DuanBaiHua/Central South University,1/694
  14. Technique Research on Powder Injection Molding of Ti(C,N)-Based Cermets,FanChou/Huazhong University of Science and Technology,0/392
  15. Fabrication and Properties of Spray Forming High Mn ZA35 Alloy,LiuJingFu/Shenyang University of Technology,0/243
  16. Pure molybdenum injection molding technology research,TanZhaoQiang/Central South University,1/127
  17. Cu Composite Powder Injection Molding Technology and Mechanical Properties,LiWei/Kunming University of Science and Technology,2/187
  18. Research on Related Techniques of Powder Injection Molding of Ti(C,N) Based Cermets,YanMingShuang/Huazhong University of Science and Technology,0/119
  19. Research on Ceramic Injection Molding and Debinding Technology,WuBin/Huazhong University of Science and Technology,0/195
  20. Numerical Simulation of Flow Processes in Ceramic Powder Injection Molding,PengZhou/Huazhong University of Science and Technology,1/133
  21. The Research on the Control System of the Spray Deposition Tubular and Tundish Level Control,SunRenQiao/Nanjing University of Aeronautics and Astronautics,0/57
  22. Research on Simulation of Spray Forming Tubular Preforms and Control of Spray Height,SongHongZuo/Nanjing University of Aeronautics and Astronautics,2/68
  23. The Evolution Process of Billet with Twin Nozzles in Multi-spray Forming and Shape Control,WangChengQiang/Nanjing University of Aeronautics and Astronautics,0/139
  24. Mathematical Simulation of Billet Profile Growing Process and Structure Prediction during Spray Forming Process,FanWenJun/Inner Mongolia University of Science and Technology,3/120
  25. Study of Motion and Transfer Heat Process of Droplet and Stress of Billet,WenLiJun/Inner Mongolia University of Science and Technology,3/184
  26. Research of Re-crystallization Silicon Carbide Heating Element by Extrusion Molding,MeiXinTao/Wuhan University of Technology,5/243
  27. High aspect ratio micro- structural parts injection molding filling behavior studies,TangMeiLin/Central South University,0/161
  28. The microlens array injection molding replication evaluation and optimization of process parameters,ShenLongJiang/Central South University,6/218
  29. Defects and Properties Analysis of Cemented Carbide by PIM,LiaoXueSong/Central South University,0/178
  30. Preparation of Skidproof Coelioscope Tissular and Vascular Clamp by Metal Powder Injection Molding,WangGuoHui/Central South University,0/53
  31. The Research on Process and Microstructure of Thin Parts in Laser Cladding Forming,LuJianGang/Hunan University,5/198
  32. Study on Powder Spray Technology for Decayed Tooth,LiDaQi/Jilin University,1/81
  33. The Raw Material Manufacture and Mold Design of Magnesium Alloy Semi-Solid Injection Molding,HongYan/Harbin University of Science and Technology,0/290
  34. Viscous Behaviours of Each Phase and Wall Slip in Bi-Phase Simulation of the MIM Injection,FanXiaoXin/Southwest Jiaotong University,2/86
  35. Research on Powder Injection Molding of Ti(C, N) Based Cermets,WeiJing/Huazhong University of Science and Technology,1/153
  36. Fine micro- structural parts with injection molding process fountain systolic flow simulation and application,XieLei/Central South University,1/238
  37. Carbide injection molding process,LiZhiXi/Central South University,1/209
  38. Metal injection molding technology of larger size pieces,LiLiuJun/Central South University,2/237
  39. Preparation and Evaluation of tungsten based metal powder injection molding feedstock,TangYan/Central South University,2/121
  40. Gas-assisted injection molding Numerical simulation and process optimization,XiaoZhengMing/Kunming University of Science and Technology,7/233
  41. Modeling and Optimization of Movement Parameters of Irregular Tubular Spray Depositing,HanWei/Nanjing University of Aeronautics and Astronautics,0/16
  42. Research on Shape Simulation of Billet with Twin Nozzles in Multi-spray Forming,ShiYongZheng/Nanjing University of Aeronautics and Astronautics,0/60
  43. Theory Model and Process Research on Powder Injection Molding of Ti(C, N) Based Cermets,GuoRan/Huazhong University of Science and Technology,0/70
  44. Basic Experiment and Simulation on Laser Cladding Forming of Metal Powder,TaoChunHua/Dalian University of Technology,4/408
  45. Process Research on Metal Powder Injection Molding of Pure Iron Soft Magnet,DuWei/Huazhong University of Science and Technology,0/78
  46. The Research of Process and Properties on Powder Injection Molding of Fe-2Ni Based Alloy Steel,ShuJian/Huazhong University of Science and Technology,0/77
  47. Process and Dimensional Precision Research on Powder Injection Molding of Ti(C, N) Based Cermets,ZhaoYongFeng/Huazhong University of Science and Technology,0/67
  48. Research on Measurement and Simulation of Neural Network Model for Dynamic Characteristic Dimension of Spray Columnar Deposit,MaZhenTao/Shenyang University of Technology,0/46
  49. Study on the Shape Evolution and Heat Transfer of the Rodbillet during Spray Forming Process,ZhangYunSong/Inner Mongolia University of Science and Technology,0/55
  50. Process of Scanning Spray Forming and Analysis Based on As-Deposited Microstructures of Magnesium Alloy,ZhaoWenJun/Harbin Institute of Technology,3/62

Total 2 Pages First Previous 1 2 Next Last

© 2012 www.DissertationTopic.Net  Mobile