Dissertation > Excellent graduate degree dissertation topics show

The Research on Process and Microstructure of Thin Parts in Laser Cladding Forming

Author: LuJianGang
Tutor: LiLiJun
School: Hunan University
Course: Mechanical Manufacturing and Automation
Keywords: Laser Cladding Forming (LCF) Thin Parts Process Microstructure
CLC: TF124.39
Type: Master's thesis
Year: 2004
Downloads: 198
Quote: 5
Read: Download Dissertation

Abstract


The process and microstructure of Laser Cladding Forming (LCF) thin parts are experimentally and theoretically studied in this paper and main conclusions are as follows:l.A practical LCF equipment, including a 1KW continuous wave CO2 laser instrument, a three-axes CNC processing table and a powder feeding system, was established, by which thin metal components with better accuracy can be built.2. The process of LCF thin wall has been studied deeply, and a 0.55 mm width thin part with lower carbon steel has been successfully built for the first time; Next, It was investigated systematically that process parameters had an influence on the width of thin wall in deposition; Finally, it was found that the experimental results, in terms of the cross section of molten pool, are in good agreement with that of the theory, which plays an important role in lying out and determining process parameters.3. The thin wall’s accuracy of LCF has also been investigated both experimentally and theoretically, it is presented that coaxial powder-feed nozzle, laser beam mode scanning path have great effects on the accuracy in LCF, for the changes of those factors have direct influences on the shape and stability of melt pool, As a result the accuracy is on the decline.4. The lower carbon steel thin wall’s microstructure of LCF has been carefully analyzed experimentally, and it’s microstructure was made up of tiny equiaxed grain, which is entirely different from that of current reports; By combining with theory of fast cooling, the main reason lies in the fact that the solidification microstructure would grow up towards equiaxed grain under lower laser power and smaller laser beam diameter; In addition, the middle carbon part’s microstructure of LCF is mainly bainite, a little is wustite structure.5.Finally, the micro-hardness and density are also examined and experimental results are close to those of traditional processes, it shows that thin parts with near densities and better properties can be fabricated using LCF.

Related Dissertations

  1. Research on Technology and Mechanism of Joining Cemented Carbide to Carbon Steel,TG454
  2. Research on Dam-Break Probability Analysis Method for Dangerous Reservoir,TV697
  3. Construction and improvement of basic education reform process evaluation platform,G521
  4. Implementation Study of evaluation method of the high school IT courses,G633.67
  5. Research on Evaluation of Simulation Systems Based on Fidelity,TP391.9
  6. Process Support Vector Machine and Its Application to Satellite Thermal Equilibrium Temperature Prediction,TP183
  7. Research on Index System and Evaluation of University Office Greening,G647
  8. Effective Ways of Cultivating Design Thinking in the Teaching of Advanced Art Design,J50-4
  9. Analysis of Nutritional Compositions and Quality of Shishen (Eremurus Chinensis Fedtsch.),S647
  10. The Experimental Research on Regeneration Aggregate and Proportioning of Recycled Concrete Brick,TU528
  11. Dalian Waters Fire-fighting Forces Deployment Scheme Research,U698.4
  12. The Process Approach and English Writing Teaching in Vocational High Schools,G633.41
  13. The Application of Fuzzy Comprehensive Evaluation Based on Genetic Algorithm in Vocational Evaluation of Classroom Teaching,G712
  14. Recycled aggregate semi- rigid concrete preparation and molding of test,TU528
  15. Studies on the Synthetic Process of Flubendiamine,TQ453.2
  16. Study on Application of Red Yeast Rice in Fermented Sausage,TS251.65
  17. The Research on Evaluation Method of Highway Ecosystem Healthy,X826
  18. Health Risk Assessment of a Brownfield Contaminated by Volatile Chlorinated Hydrocarbons and Study on Screening of Remediation Technique,X820.4
  19. Study on Synthesis and Physiological Function of N-carbamoyl-glutamate,R914
  20. Study on Enhance Efficiency and Mechanism of BAC Process for Nitrogen Removal by Preoxidation,X703
  21. Study on Characteristics of Morphology Anatomy and Physio-Biochemistry of Two Ecotype Varieties Cucumber Leggy Seedilings,S642.2

CLC: > Industrial Technology > Metallurgical Industry > Metallurgical Technology > Powder metallurgy (metal ceramic technology ) > Powder molding, sintering and post-processing > Molding process > Other molding
© 2012 www.DissertationTopic.Net  Mobile