Dissertation 

About 1209 item dissertation in line with Aviation Aerospace Manufacturing Engineering query results,the following is 1 to 50(Search took 0.092 seconds)

  1. Reseach and Design of Automated Production Line of the New Prefabricated Exhaust for Residential Ketchen,XiongXiaoMing/Nanchang University of Aeronautics and,0/29
  2. Research on Tracking Control of Mobile Robot Based on Wheel-soil Interaction Modeling,XiaKeZuo/Harbin Institute of Technology,0/81
  3. Dynamics Simulation for Hexapod Robot Based on Modeling of Foot-terrain Interaction,SongJianHu/Harbin Institute of Technology,0/49
  4. Stiffness Analysis of Drilling and Riveting Robot during Drilling,ZhuJian/Nanjing University of Aeronautics and Astronautics,0/13
  5. Research on On-line Detection Technology of Robotic Drilling and Riveting System Based on Integration of Multiple Sensors,HeMeiHua/Nanjing University of Aeronautics and Astronautics,0/14
  6. A Structural Optimization of Spraying Robot Based on the Deformation Errors Control,LiBo/Nanchang University of Aeronautics and,0/16
  7. Research and Develop on the Simulating System for Binocular Stereo Measurement,XuHaoJie/Nanjing University of Aeronautics and Astronautics,0/15
  8. Research and Application on Digital Modeling and Deformation Simulation Technology,ShiShuangYao/Nanjing University of Aeronautics and Astronautics,0/16
  9. Research on Fast Method for Triangular Mesh Recnostruction,XuWanYin/Nanjing University of Aeronautics and Astronautics,0/11
  10. Research on Technologies of Dental Abutment Customized Design Based on B Spline Free-form Deformation,XieNiaoLong/Nanjing University of Aeronautics and Astronautics,0/6
  11. Research on the Key Technologies for Surface Reconstruction from Discrete Point Cloud,JiangXiaoTong/Nanjing University of Aeronautics and Astronautics,0/26
  12. Research on Tool Wear Monitoring Based on Machine Vision in NC Milling Process,ZhangJiLin/Nanjing University of Aeronautics and Astronautics,0/24
  13. Research and Implementation on Embedded Iris Recognition System Based on DSP,HuangJian/Nanjing University of Aeronautics and Astronautics,0/13
  14. Research on Measurement Technology of Dentofacial Model Based on Binocular Stereo Vision,ShenGuoFeng/Nanjing University of Aeronautics and Astronautics,0/5
  15. Research and Realization of FPGA-Based Serial Bus,LuJian/Nanjing University of Aeronautics and Astronautics,0/21
  16. Research of Material Management Method for Discrete Workshop Based on Internet of Things,JiangLei/Nanjing University of Aeronautics and Astronautics,0/28
  17. Signal Processing and Visualization of Thermal Wave Detection Based on Infrared Lock-in Thermography,GuoBing/Harbin Institute of Technology,0/26
  18. Measurment System Design and Experimental Study on the Thermo-physical Parameters of Blood Vessel,LiXueMin/Harbin Institute of Technology,0/37
  19. Research on Modeling of Tooth Wear Based on Morphing Techniques,ZhangXu/Nanjing University of Aeronautics and Astronautics,0/2
  20. Dynamics Analysis of a High-speed Motor Rotor System,XuAiJie/Harbin Institute of Technology,0/116
  21. Mechanism and Prevention of Wind-induced Failure of Transmission Line Suspension Insulator String,ZouXiangYan/Nanchang University of Aeronautics and,0/33
  22. Applications of the Laminar Flamelet Model for the Numerical Simulation of Diffusion Turbulent Combustion,JieTianFang/Xiamen University,0/5
  23. Research on Structure Design and Optimization of Proprioceptive Mechanism of Vehicle Driving Simulator,LiuXia/Nanjing University of Aeronautics and Astronautics,0/8
  24. Aerodynamic Analysis for Key Parts of Rotor Car Based on CFD,LiDongFeng/University of North,0/3
  25. Research on the Manufacturing Quality Warning and Analysis System for the Railway Freight Car Bogie,ZhuBin/Nanjing University of Aeronautics and Astronautics,0/6
  26. Research on Tubular Size Propellant Face Detection Based on Machine Vision,HengPeiYin/University of North,0/4
  27. Research on Key Technologies of Knowledge Integration and Application Supporting Networked Manufacturing for Complex Products,LiuJiaoJian/Nanjing University of Aeronautics and Astronautics,0/36
  28. Design and Simulation Analysis for Articulated Portable Foot Restraint,LuoXue/Harbin Institute of Technology,0/10
  29. Thermal Analysis of Deployable Planar Antenna Support Structure,WangBin/Harbin Institute of Technology,0/33
  30. Research on Method of Thermal Design and Analysis of Spaceborne Mechanism with Sinda and TMG,SongHuiKai/Harbin Institute of Technology,0/36
  31. Research on the Structural Design and Mechanical Testing of the Flight Model of TX-1MiniSatellite,ChenJing/Nanjing University of Aeronautics and Astronautics,0/27
  32. Research for Dual Redundancy Electromechanical Actuation System of UAV Landing Gear,LiZuo/Nanjing University of Aeronautics and Astronautics,0/13
  33. Research on Flapping-wing Flight Principle and Mechanism of the Imitating Butterfly Ornithopter,LeiYaChao/Nanchang University of Aeronautics and,0/110
  34. Characteristic analysis of micro structure of unmanned reconnaissance aircraft aerodynamic,FangRuJin/University of North,0/5
  35. Research on the Powder-mixed Edm Processing of SiCp/Al Matrix Composites,ChenKui/Harbin Institute of Technology,0/17
  36. Research on Robotic Route and Posture Off-line Planning and On-line Calibrating Method for Aircraft Assembly,ZhouWeiXue/Nanjing University of Aeronautics and Astronautics,0/11
  37. Research and Development of Workflow Management System for Product Support of Aircraft,HuangHuan/Nanjing University of Aeronautics and Astronautics,0/2
  38. Research on Superplastic Forming and Diffusion Bonding Technology of TC4Titanium Alloy Rudder,WangDaGang/Nanjing University of Aeronautics and Astronautics,0/18
  39. Research on the Method of Laser Tracker on Measure Target Ball Automatic Positioning Based on Computer Vision,WangLiang/Nanjing University of Aeronautics and Astronautics,0/38
  40. Research on Aircraft Assembly Stepped Difference and Gap Vision Measurement Technique,ShenChangLi/Nanjing University of Aeronautics and Astronautics,0/12
  41. Research on Computer Aided Tolerance Analysis Oriented to Aircraft Manufacturing Coordination,HuangWei/Nanjing University of Aeronautics and Astronautics,0/12
  42. Research on Constructing Technology of Digital Measuring Field for Aircraft Large Component Assembly,ZhaoLeLe/Nanjing University of Aeronautics and Astronautics,0/27
  43. Research on Statistical Dimensional Deviation Analysis for Aircraft Compliant Parts Assembly,HouDongXu/Nanjing University of Aeronautics and Astronautics,0/13
  44. Method and Implementation of Task Planning in Robotic Flexible Assembly System Based on Product Model,XiaoShuang/Nanjing University of Aeronautics and Astronautics,0/18
  45. Research of Ultrasonic Shot Peening Forming Technology in Curved Surface Parts,ShiXueGang/Nanjing University of Aeronautics and Astronautics,0/9
  46. Research of Ultrasonic Shot Peening Technology in Straigthening,ChenXing/Nanjing University of Aeronautics and Astronautics,0/4
  47. Research and Development on Aircraft Fault Management Information System,ZhaoZuo/Nanjing University of Aeronautics and Astronautics,0/17
  48. CNC Machining Condition On-line Monitoring and Identification Based on Feature for Aircraft Structural Parts,LiMing/Nanjing University of Aeronautics and Astronautics,0/17
  49. Research and Development of Fast Design System of Initial Blank for Rubber Pad Forming,ZhangXianTeng/Nanjing University of Aeronautics and Astronautics,0/12
  50. Process Constraints Based Machining Feature Recognition for Aircraft Structural Parts,HuangLingLing/Nanjing University of Aeronautics and Astronautics,0/13

Total 25 Pages First Previous 1 2 3 4 5 6 7 8 9 10 Next Last

© 2012 www.DissertationTopic.Net  Mobile