Dissertation > Excellent graduate degree dissertation topics show

Preparation and Study of Photocatalytic Properties on POM-based TiO2 or Ta2O5 Mesoporous and Microporous Composite

Author: JiangShuJuan
Tutor: GuoYiZuo
School: Northeast Normal University
Course: Analytical Chemistry
Keywords: photocatalytic Polyoxometalate Programmed temperature hydrothermal methods Sol-gel monodisperse
CLC: O643.36
Type: Master's thesis
Year: 2006
Downloads: 158
Quote: 1
Read: Download Dissertation

Abstract


Two types of the solid materials containing polyoxometalates （POMs） including mesoporous Na4W10O32/TiO2 （anatase phase） and microporous H3PW12O40/Ta2O5 （amorphous） were prepared by the sol-gel and programmed temperature hydrothermal treatment. UV-vis diffuse reflectance spectra （UV/DRS）, infrared （IR） spectra, Raman spectra, ICP-AES, powder X-ray diffraction （XRD）, were used to characterize the composition, structure and the integrity of the starting POMs during the process of the preparation. The morphology and surface physicochemical properties of as-prepared solid photocatalytic materials were analyzed by transmission electron microscopy （TEM）, field emission scanning electron microscopy （FESEM） and nitrogen adsorption analysis. The results indicated that as-prepared materials exhibited porous structures. The average pore size of the hybrid catalyst Na4W10O32/TiO2 is about 3.74 nm and the particles of the composite are well-distributed although aggregation among particles occurred, in addition, the estimated particle size was in the range of 8 to 10 nm. The porous structures, morphology and the surface physicochemical properties of H3PW12O40/Ta2O5 are different according to the increase of the amount of H3PW12O40 in the composition. The pore sizes are in the range of 1.15-1.91 nm although there are parts of pores with a size of ca. 2.51 nm existing in the composition with a higher loading of H3PW12O40. This mesoporous structure is attributed to the conglomeration of particles.Photocatalytic properties of the particles obtained here were tested by the degradation of polyacrylamide （PAM）、 salicylic acid （SA）、 Rhodamoine B （RB）、 and 4-nitrophenol （4-NP） under UV and visible-light irradiation. Obvious decreases of the viscosities were determined after irradiating the suspension of PAM and Na4W10O32/TiO2 under visible-light. On the other hand, the degradation of SA and RB are also be achieved by visible-light irradiation with H3PW12O40/Ta2O5 in the reaction system, respectively. The H3PW12O40/Ta2O5 composite can decompose 4-NP more efficiently than Ta2O5 and H3PW12O40/SiO2 under UV irradiation.Phase of Na4W10O32/TiO2 changed from amorphous into anatase after the programmed temperature treatment. This treatment can enhance the photocatalytic activity although phase transfer did not occur during the preparation of H3PW12O40/Ta2O5. The photocatalytic activity of the solid photocatalytic materials is attributed to the structure of POMs, unique physicochemical properties of the porous materials, sensitized effect of the dye molecular adsorbed on the surface of the catalyst, and the synergistic effect yielded by the combination of POM and TiO2 and Ta2O5, respectively.

Related Dissertations

  1. Preparation and Photocatalytic Properties for Water Decomposition of Titanate Photocatalyst,O643.36
  2. Preparation and Electrocaloric Effect of BaxSr1-xTiO3 Ferroelectric Thin Films,TB383.2
  3. Studies on Synthesis, Characterization and Properties of Fe-V Co-doped TiO2 Catalyst,O614.411
  4. Investigation of Fabrication, Characterization and Property of Fuctional Titanium Dioxide Nanoporous Materials,TB383.1
  5. Combination Degradation of Chlor Pyrifos Via Biodegradation and Photodegradation,X592
  6. Preparation and Photocatalytic Properties of Semiconductor Oxides,O643.36
  7. Preparation, Characterization and Photocatalytic Properties of a Novel Nano-ZnO,X703.1
  8. Study on the Synthesis of La0.8K（0.2）FeO3 Perovskite Composites and the Photocatalytic Degradation of Dye Wastewater,X703.1
  9. Experimental Research to Remove Indissolved Methyl Mercaptan with Ultraviolet,X703
  10. Compound Modification and Photochemical Catalysis Property of Nano-TiO2,TB383.1
  11. Study on Preparation, Characterization and Adsorptive Performance of Porous Glasses,TQ171.1
  12. Research on Synthesis, Charaterization and Photocatalytic Activity of Transition Metal Substitute of Polyoxometalates,O643.36
  13. Preparation and Visible Light Catalytic Properties of C、N、F-doped TiO2 Nanoparticles,O643.36
  14. Study on Preparation and Performance of Zeolite-TiO2-Cu2O Composite Photocatalytic Materials,O643.36
  15. Synthesis and Application of Visible Light Photocatalytic Materials of Bi Family,O643.32
  16. Preparation of Porous ZnS-CdIn2S4 Solid Solution Photocatalysts and Hydrogen Production Research,O643.36
  17. The Preparation, Characterization of Photocatalysis Material TiO2 and the Application in Arsenic Adsorption,O614.411
  18. Preparation of a Visible Light Driven Bi2O3-TiO2 Composite Photocatalyst and Used for Photocatalytic Degradation of Organic Pollutants,O643.36
  19. Study on Preparation and Electrochemical Properties of LiNi0.5Mn0.5O2 Cathode Thin-films for Micro-lithium Batteries,TM912
  20. Preparation and Photocatalysis Oxidative Deep Desulfurizatio for Diesel Oil of Photocatalyst Phosphotungstic Acid,TK425
  21. The Preparation and Application of Modified TiO2 Film with Visible Light Activity,O614.411

CLC: > Mathematical sciences and chemical > Chemistry > Physical Chemistry ( theoretical chemistry ),chemical physics > Chemical kinetics,catalysis > Catalytic > Catalyst
© 2012 www.DissertationTopic.Net  Mobile