Dissertation > Excellent graduate degree dissertation topics show

Microstructure, Creep Behaviors and High Temperature Oxidation Features of Single Crystal Ni-based Superalloys

Author: WangChunTao
Tutor: TianSuGui;ZhangLuTing
School: Shenyang University of Technology
Course: Materials Science
Keywords: Single crystal Ni-based superalloy heat treatment lattice misfits creep features TCP phase high temperature oxidation
CLC: TG139
Type: Master's thesis
Year: 2006
Downloads: 501
Quote: 2
Read: Download Dissertation

Abstract


By means of the analysis of the differential thermal curve (DTA), and microstructure observation, heat treatment conditions of the superalloy have been determined. The regularity of the microstructure evolution during the alloy heat treated at different conditions is investigated by the analysis of finite element method. The crystal lattice parameters and misfits of the y7y phases in the alloy have been calculated by means of X-ray diffraction analysis. The creep curves and internal friction stresses of dislocation motion for the superalloy have been measured at elevated temperature, and the creep activation energy and the apparent stress exponent during the steady stage creep have been calculated, and in further setting up the synthetic creep equation for describing creep regulation of the superalloy. The effects of the elements W and Co on the microstructure and properties of the alloy are studied by means of creep testing, and observation of SEM and TEM.Results show that the difference of the γ’ phase sizes between dendrite and indendritic is decreased by means of the solution treatment, the fine γ’ phase is dispersedly precipitated in the γ matrix. In the role of the interface and misfit strain energies, the γ’ phase has grown into the morphology with cubic after during first aging. During second aging, the cubic γ’ phase has slightly grown up in the form of the regular arrangement. According to "steps" mechanism, the γ’ phase is coherently grown into the cuboidal morphology along the <100> orientation. The lattice misfit of the alloy at room temperature is measured to be about —0.3121%. The average internal frictional stresses (σ0) of dislocations movement during steady state creep are slightly improved with the enhancement of the applied stress, but obviously reduced with the increase of temperatures, the internal frictional stress (σ0) of dislocations movement is more sensitive to temperature in the range of the applied high stresses. The dislocation networks on the y// phases interfaces are formed by the dislocations reaction with different Burgers vectors during primary creep. When the elements Al and Ta of γ’-former exceed the solubility in the matrixduring creep in the role of the applied stresses and temperatures, these supersaturated elements are congregated to precipitate some of the finer / particles from y matrix. The alloy containing 4wt% W> Co elements displays a better property at elevated temperature. With the increment of the elements W and Co concentration, the needle-like u phase is precipitated during the elevated temperature aging, which reduces severely the creep properties of the alloy due to exhausting the elements W and Mo in the matrix of alloy.The surface oxidation of the elements occurs during high temperature exposure. The oxides of the elements Al and Cr are formed on the surface layer of alloy. The internal oxide of AI2O3 was formed in the sub-surface layer in the form of the rod and block. The thickness of internal oxidation layer, with the increase of time, displays the regularity of the parabolic curve. The / phase in the internal oxidation layer is dissolved as a result of the exhausting of the element Al, which is one of the main reasons for resulting in the creep lifetimes decreased of the alloy.

Related Dissertations

  1. Study on Key Technology and Its Physiological Basis of Virus Elimination and Rapid Propagation of Phalaenopsis,S682.31
  2. A molecular dynamics study of aqueous solution in the hot steel surface state of motion,TG142.15
  3. Research on Al-Zn-Sn Series Anode Materials of Ga, Bi Alloying and Heat Treatment,TG166.3
  4. Preparation of Gold-Maghemite Nanocomposites,TB383.1
  5. Preparation , Structure and Properties of electrodeposited Ni - W alloy coating,TQ153.2
  6. Thermal Analysis Experimental Study of Combustion Kinetics and Pyrolysis in Fire Flooding,TK16
  7. Laser Direct Metal Deposition (DMD) of Ni-Base Superalloy and Its High Temperature Oxidation Resistance,TF124.39
  8. The Research on Production Technology, Microstructure and Mechanical Properties of AZ31 Magnesium Alloy Thin Sheet,TG339
  9. Mechanism of Heat Treatment in Improving Chilling Tolerance of Peach Fruit and in Silico Cloning of a Related Phospholipase D Gene,S662.1
  10. Mg-2Nd-0.2Zn-0.4Zr-xY magnesium alloy microstructure and mechanical properties of the study,TG146.22
  11. Research on New Heat-Treatment Technology and Failure Mechanism of Cadi Grinding Ball,TG164.4
  12. Compostion Design and Microstructure Control of New Type Fe-Cr-Mo-V-Nb Heat Strength and Corrosion Resistance Steel,TG142.7
  13. Study on Microstructure and Properties of High Strength Al-Zn-Mg-Cu Alloy by Spray Forming,TF124.39
  14. Effects of LaNiO3 Buffer Layer on Grain Orientation and Electrical Properties of Ca0.4 Sr0.6 Bi4Ti4O15 Thin Film,TQ174.1
  15. Study on Structure and Catalytic Performance of Cu/AC Catalysts after Modification of Activated Carbon,O643.36
  16. Research on Micro Alloying and Heat Treatment of Al Zn-Bi Series Sacrificial Anode Materials,TG146.21
  17. Effect of Heat Treatment and Al Addition on the Microstructure and Properties of TbDyFe Alloy,TG166
  18. 6156 aluminum alloy performance impact of heat treatment and trace elements,TG146.21
  19. Study on Manganese Dioxide Electrodes Material for Supercapacitor,TM53
  20. Study on Technology of Electroless Ni-W-P and Mechanism of the Corrosion Resistance of Coating in Sulfuric Acid,TQ153.12
  21. Study on Improving the Thermal Fatigue Properties of Welded HHD,TG457.11

CLC: > Industrial Technology > Metallurgy and Metal Craft > Metallurgy and Heat Treatment > The alloy learn with a variety of properties of alloys > Other special nature of the alloy
© 2012 www.DissertationTopic.Net  Mobile