Dissertation > Excellent graduate degree dissertation topics show

Experimental Research on Recycled Concrete Beams Bending Performance

Author: SongXinWei
Tutor: LiPingXian
School: Zhengzhou University
Course: Environmental Engineering
Keywords: recycled concrete beam HRB400 steel bar flexural capacity crack resistance crack width deflection deformation
CLC: TU375.1
Type: Master's thesis
Year: 2006
Downloads: 313
Quote: 33
Read: Download Dissertation

Abstract


A large number of abandoned concrete will be created with the construction of new buildings, the demolition of old buildings and construction of infrastructure projects. Recycled aggregate can be gained by breaking, cleansing and classification the abandoned concrete. The new concrete, using recycled aggregate as a complement to some or all of the natural aggregate, is called recycled aggregate concrete, also known as recycled concrete. Producing recycled concrete is a way of using the construction waste as one resource. In the past period, the studies on recycled concrete are mainly focus on the basic performance, and recycled concrete mainly applied to foundation layer, such as roads, structure substrate. If recycled concrete could be applied to concrete structures, it can become an effective and broad way to treat abandoned concrete.Based on bending experiment of 8 recycled concrete beams, analyze recycled the influence of concrete and reinforcement ratio no the recycled concrete beams’ bending performance, failure modes, deformation characteristics, and study the flexural capacity, crack resistance, crack width and deflections under serviceability limit states. The main results as follows:(1) Replacement of natural aggregate with recycled concrete has not significant influence no the flexural capacity. Recycled concrete beams’ bending bear capacity is mainly determined by dimensions of structural member, the value of concrete compressive strength and ratio of reinforcement, etc.(2) Recycled concrete has no significant impact on cross-section crack bending moment. Recycled concrete beams’ crack breaking moment are increased with the rising of reinforcement ratio, but the ratio of reinforcement has little impact, concrete tensile strength is the major impact factor.(3) Replacement of natural aggregate with recycled concrete has no significant impact on the max crack width of reinforcement recycled concrete beams.

Related Dissertations

  1. The Key Technologies of Autocollimation System Based on the Beam-Splitting Target Detecting Feedback of Laser Beam Shift,TH741.14
  2. Seismic Analysis of Three-Span Cantilever Beam Viaduct with Pounding Effects and Restrainers,U442.55
  3. Design of Control System for Laser Beam Steering Device,TM301.2
  4. Image-Guided Adaptive Radiation Therapy of Intensity-Modulated Radiation for Cervical Cancer,R737.33
  5. Dosimetric Characteristics of Photon Beam in the Medium Interface Region,R815
  6. The Clinical Study of Cone-beam CT Combining with Active Breathing Control System on Lung Cancer Radiotherapy,R734.2
  7. Rock-fill Concrete Experiments on Comprehensive Properties and Studies on Thermal Stress,TU528
  8. The Experimental Research on Regeneration Aggregate and Proportioning of Recycled Concrete Brick,TU528
  9. Evaluation of Image Quality of Megavoltage Computed Tomography for Helical Tomotherapy Unit and Aplication for Dose Recalculation,R730.5
  10. The Research of Technology for 3D Fashion Virtual Distortion and Display,TS941.26
  11. Solid Oxide Fuel Cell ferrite connect the material properties of,TM911.4
  12. Research on the Mutation Breeding of Flavomycin and Regulation of Fermentation Techniques,TQ920.6
  13. Studies on the Physiology and Biochemistry Characteristics and Fresh Keeping Technology of Post-Harvest in Pleurotus Eryngii,S646
  14. Preliminary Study of Tomato Transformation with Soybean Genome DNA by Low Energy Ion Beam Implantation,S641.2
  15. Wideband Digital Beamforming Algorithm,TN957
  16. The Deformation Law and Its Influnecing Factors of Iron-based Valve Plate in Sintering Process,TF124.5
  17. A Digitalized Apparel Customization System for Special Shape,TP391.72
  18. The Research on Assessment of Environmental and Economic Performance for Recycled Concrete Based on LCA-LCC,TU528
  19. The Ultimate Load Capacity Analysis of Power Transmission Tower Structures,TM753
  20. Research of the Real-time Rock Deformation Monitoring System,TP274
  21. The Model of Soft Tissue Deformation Based on the Method of Meshfree,TP391.9

CLC: > Industrial Technology > Building Science > Building structure > Concrete structure,reinforced concrete structure > Reinforced concrete structures > Girder
© 2012 www.DissertationTopic.Net  Mobile