Dissertation > Excellent graduate degree dissertation topics show

Wudang Power Distribution Automation Study and Pilot Project

Author: FanXin
Tutor: XieWeiKangï¼›HuXianZe
School: Guizhou University
Course: Proceedings of the
Keywords: Distribution network Distribution automation pilot Communication mode Feeder automation
CLC: TM76
Type: Master's thesis
Year: 2006
Downloads: 139
Quote: 0
Read: Download Dissertation

Abstract


Wudang Power urban distribution network severs for the state-level high-tech industrial development zone, which puts forward a higher request of electrical quality. Along with the deepening power grid reconstruction, the network becomes much more complex than before. In order to comprehensively improve the technical operation of economic indicators, the building of distribution automation system is imperative.This study based on the current research results and applications of distribution automation and current distribution network of Wudang area, researched the pilot urban distribution automation of Wudang area and the application of distribution automation technology in the pilot.This study followed the principle of "unified planning, step-by-step implementation and reasonable allocation, information sharing," analyzed and described the current status of the Wudang distribution network and the development of distribution automation in Wudang Power, selected pilot distribution lines and switching equipments, proposed principles and methods for circular distribution transformation of pilot lines, and defined the scope and scale of distribution automation pilot.This study combined the current status of Wudang distribution network and the typical structure model of distribution automation system, proposed that pilot distribution automation system take two layer structure model which consists of distribution master station layer and remote terminal unit layer. Based on this model, this study suggested that pilot distribution automation communication system also adopt two layer structure system composed of branch communication layer and user communication layer, presented a multi-communication project for the pilot distribution automation communication system and the ways to realize the project, and gave three solutions to the possible response delay.This study analyzed and compared commonly used feeder automation models, proposed two realistic solutions for pilot "hand in hand" circular distribution network feeder automation. In addition, this study pointed out the methods of building a integrated automation system. Finally, this study described the strategies of handling faults in master station of distribution automation system.

Related Dissertations

  1. Research on Fault Detection and Network Reconfiguration Algorithms for Distribution Network,TM727
  2. 1 - deoxynojirimycin synthetic route design and process optimization,TQ463.5
  3. The Research on Influence of Line Losses in the Distrebution Network with Small Rural Hydropowers,TM727.1
  4. Breeding of High-Yield Nosiheptide Strain and Studying of Its Formation Condition,TQ936.16
  5. Region-based wireless sensor network key management scheme for research,TP212.9
  6. Research of Two-Step Chemotrophic Microbial Reactor Removing Hydrogen Sulfied from Biogas,X703
  7. Clothing Distribution Network System Design and Optimization,TP393.09
  8. The Design of the Synchronization Algorithms for IEEE 802.16m,TN929.5
  9. Research on Distribution Network Planning of Luogang District,TM715
  10. Northwest Army Aviation Pilot Study of Incentive Problems,E263
  11. Investigation on Channel Estimation Based on Pilot Arrangement in MIMO-OFDM System,TN919.3
  12. Flocculation and Filter Experiment of Effluent from T6 Tube,X703
  13. Pilot Plant Experiment and Simulation Research on NO_x in Oxy-fuel Combustion Technology,X701
  14. The Research and Realization of Intelligent Terminal of Coal Mine Monitoring Workstation,TD76
  15. The Research of QJZ-1200/3300-8 Multi-Motor Starter Based on the PLC Control System,TD611.5
  16. The Study on Economics Evaluation of Distribution System Reliability with Consideration of Important Power Users,TM732
  17. Digital distribution networks planning,TM73
  18. Studies on Urban Distribution Network Planning and the Planning Evaluation Method,TM715
  19. Study of Energy Loss Calculation System for Multi-source Distribution Network and Its Key Application,TM744
  20. Power Line Carrier Communication System for Distribution Network Automation,TM76
  21. Distribution Network Planning Including Distributed Generation,TM715

CLC: > Industrial Technology > Electrotechnical > Transmission and distribution engineering, power network and power system > Power system automation
© 2012 www.DissertationTopic.Net  Mobile