Dissertation > Excellent graduate degree dissertation topics show

Research on the Interaction Rule between the Rare Earth Cerium and the Low Melting Point Metallic Tin in the Steel

Author: YangZongLun
Tutor: ZhangJinZhu
School: Guizhou University
Course: Materials Science
Keywords: rare earth elements thermodynamic cerium-tin compound the low melting metallic
CLC: TF741.5
Type: Master's thesis
Year: 2006
Downloads: 169
Quote: 2
Read: Download Dissertation

Abstract


Along with the dosage increasing of society to the steel products, it will be obtained the unceasing development that the electric arc furnace steel-making as the main raw material. During the period of circulation use of scrap steel, how- ever, it causes the content increase unceasingly of the low melting point metallic elements （such as Sn, Pb, Sb, As, Bi and so on） in the steel. The low melting point metallic elements will cause the serious harm to the properties of steel products. Therefore, there is a great need to discuss the method on how to remove the low melting point metallic elements in steelmaking process and control their contents in steel. The RE element is nearly only element that can be compound with harmful element of Pb, Sn and so on in the steel. It is because that the high chemical activity of RE element depends on the character of their electro-construction of 4f.In this paper, the formation enthalpies of Cerium-Tin compounds of Ce5Sn3, which has been produced between the RE earth of cerium and the low melting point metallic element of tin, was calculated by the Miedema the theory of binary formation enthalpies. The change of entropy of compound has been calculated by the principle of ionic entropy. And the standard formation energy of compound has been estimated through the absolutely entropy. The possibility of the reaction between the RE earth cerium and the tin of low melting point metallic element in the low oxygen and sulfur steels is studied thermodynamically.The high pure RE cerium and the low melting point metallic tin have been added to the low oxygen and sulfur industry ferrite in this experiment, which has been melted in the intermediate frequency vacuum induction smelting furnace. And some of the samples have been carried on annealing processing. It has been qualitative and quantitative analyzed that the casting samples and the annealing samples through the OM, SEM, XRD, EPMA and so on. The experimental results show that the RE cerium firstly interact with the oxygen and sulfur in the steel and form compounds of Ce2O3 and Ce2O2S. When the quantity of oxygen and sulfur reduce to the certain degree, the cerium begin to react with tin. The reaction is easy to carry out when the steel contain low content of oxygen and sulfur.The RE element cerium combine with the low melting point metallic tin and form the high melting point Ce5Sn3 compounds. A small amount of cerium and tin compound has also been produced and formed multi- phase organize by the core of Ce2O3 and Ce2O2S which have been formed previously. The particle size of multiphase organize is big, generally between 10μm and 100μm, and random distribute in the substrate. The cerium and tin compound which has been independent shaped nucleus is the deep grey spherical particle. The size of spherical particle is very small, generally between 1μm and

Related Dissertations

  1. Effect of Rare-earth Elements on Dynamic Recrystallization and Texture of AZ31 Wrought Magnesium Alloy during Hot-rolled,TG339
  2. Study of Experiments and Thermodynamics and Kinetic Models of Natural Gas Hydrate Formation in the Diverse and Complex Systems,TE621
  3. Thermochemistry on the Coordination Behavior of 2-pyrazinecarboxylic Acid with Metallic Elements.,O621.13
  4. Research on the Thermodynamic Cycle Characteristics of the Combined Cooling Heating and Power System Based on Renewable Energy,TM611
  5. Design Analysis for IGCC Power Station System and Its Thermodynamic System Study,TM611.3
  6. A Study on the Occurrence of Mercury and the Chemical Thermodynamic Calculation of Mercury During the Mild Thermal Upgrading Process of the Typical Coal from Guizhou Province,TK16
  7. The Dynamics Analysis of the Reciprocating Compressor with the Capacity Regulation System,TH457
  8. Experimental Studies of Externally Heat-Integrted Double Distillation Columns (EHIDDiC),TQ053.5
  9. Chloride of the EMF Method alkali metal ( sodium, potassium , rubidium , and cesium ) in alcohol ( glycol , glycerol ) - the thermodynamic properties of water mixed solvent,O645.1
  10. A New Type of Heat Pump Used in Desalination,P747
  11. The Research & Development of Integration of CDQ and Syngas Polygeneration Technology,TE665.3
  12. Study on Application of Dividing Wall Column to Extractive and Azeotropic Distillation Systems,TQ053.5
  13. The Preparation and Photocatalytic Performance of Rare Earth Elements、heteropoly Acid、gold Doping and Modifing TiO2,O643.36
  14. Re-doped Aluminum Acid Strontium Long Afterglow Materials and Characterization of the Performance,TB34
  15. The Thermodynamic Calculation and Visual Design Software Development of Feedwater Heater,TM621
  16. R-O Model with Varying Parameters for Dam Materials and Its Thermodynamic Explanation,TV41
  17. Thermodynamic Optimization and Calculation of Phase Equilibria in the Co-Mn-X (X: Ta, Pt, B, Dy, Pr) Ternary Systems,O642.4
  18. Study on the Synthesis of Propylene Carbonate from Carbon Dioxide and 1, 2-Propylene Glycol over Acid Catalysts,O643.32
  19. Feasibility Discussion on Popularizing Passive Solar House in the Countryside in Hebei Province,TU18
  20. Thiazolyl thiourea derivatives of azoles Synthesis, thermodynamic properties , biological activity and crystal structure of,TQ450
  21. Structure and Thermodynamic Parameters of Fe Based Amorphous Alloy,TG139.8

CLC: > Industrial Technology > Metallurgical Industry > Steelmaking > EAF steelmaking > Electric arc furnace steelmaking
© 2012 www.DissertationTopic.Net  Mobile