Dissertation > Excellent graduate degree dissertation topics show

Investigation on Surface Nanocrystallization and Ion Implantation of Q235 Low Carbon Steel

Author: ZhangHengJin
Tutor: WeiYingHui
School: Taiyuan University of Technology
Course: Materials Processing Engineering
Keywords: low carbon steel surface nanocrystalline ion implantation grain refinement plastic deformation strain rate
CLC: TG174.44
Type: Master's thesis
Year: 2006
Downloads: 139
Quote: 4
Read: Download Dissertation

Abstract


Most failures of materials occur on surface, including fatigue fracture, corrosion and wear etc., which are very sensitive to microstructure and properties of the surface. As a result, the surface modification of engineering materials is found to process more and more industrial applications. Nanocrystalline materials have attracted considerable interest because of their novel mechanical, physical and chemical properties originating from a large volume fraction of grain boundaries or interfaces with respect to the conventional coarse-grained polycrystalline materials. It is expected to achieve surface modification by the generation of a nanostructured surface layer, referring as surface nanocrystallization(SNC), so that the properties and behavior of materials are significantly improved. With the increasing development of surface engineering and nanotechnology, more and more researches focus on the combination of surface modification and nanotechnology.A porosity-free and contamination-free nanostructured surface layer with thickness about 25μm was fabricated on a Q235 low carbon steel plate by using surface mechanical attrition treatment (SMAT). Microstructural characterization of the nanostructured surface layer was investigated by means of X-ray diffraction (XRD), transmission electron microscopy (TEM) and optical microscopy. Then Ti ion was implanted into the SMA treated

Related Dissertations

  1. Rate-dependent Endochronic Damage Constitutive Model for Concrete,TU528
  2. Effect of Adding ZrO 2 Nanopowder on Microstructure and Mechanical Properties of Carbon Steel,TB383.1
  3. Experimental Study on Dynamic Hysteretic Rule of Reinforced Concrete Columns under Rapid Loading,TU375.3
  4. Dynamic Constitutive Model of Concrete Based on the Two Shear Unified Strength Theory,TU528
  5. Preparation and Properties of Magnesium Alloy (AZ31) Based on Severe Plastic Deformation,TG146.22
  6. Studies on Screening of Fine Strains and Fermentation Condition for Chromium-rich Yeast,TQ920.1
  7. Applied Research on Graded Broken Stone in Rainy and Wet Area,U414
  8. Experimental Study on Fracture Damage of Natural Freshwater Ice,O346.1
  9. The Deformation of Annular Metal Plate in the Transverse Magnetic Field,O343
  10. Research on the Corrosion Mechanism of Galvanization Vessel and Its Resistent Zinc Coatings,TG172
  11. Fabrication of Bulk Ultrafine Grained Two-Phase Alloys,TB383.4
  12. Study on Pore Structure and Mechanical Behaviors of Porous Aluminium,TB383
  13. The Study on Deep Decarburization by RH-KTB Processes,TF769
  14. Finite Element Analysis of the Crack Tip Field and Structural Evolution Behavior of the Crack Tip,O346
  15. Researchs on Dynamic Splitting Test of Steel Fiber Reinforced High Strength Concrete,TU528.572
  16. Screening of Thermostable Amylase-producing Strain and Ion Beam Mutation Breeding,TQ925
  17. The Molecular Identification and Preliminary Study on Mutagenic Mechanisms of Lotus Mutants Induced by Ion Implantation,S682.32
  18. Deposition and Ion Implantation of ZnO Thin Films,O484.1
  19. Experimental Study of Rock Mechanical Properties under Coupled Static-Dynamic Loads and Dynamic Strength Criterion,TU452
  20. Assessment of Left Ventricular Function in Children with Viral Myocarditis by Strain Rate Imaging and Real-Time Three-Dimensional Echocardiography,R445.1
  21. Assessment of Right Ventricular Function by Strain and Strain Rate Imaging after Transcatheter Closure of Atrial Septal Defect,R541.1

CLC: > Industrial Technology > Metallurgy and Metal Craft > Metallurgy and Heat Treatment > Metal corrosion protection,metal surface treatment > Corrosion control and protection > Metal surface protection technology > Metal complex layer of protection
© 2012 www.DissertationTopic.Net  Mobile