Dissertation > Excellent graduate degree dissertation topics show

Study on Surface Modification and Properties of 3Y-TZP Ceramic Nano-Powders

Author: YangXiaoMin
Tutor: JiaHuSheng
School: Taiyuan University of Technology
Course: Materials Science
Keywords: surface modification sintering Mechanical properties microstructure 3Y-TZP
CLC: TB383.1
Type: Master's thesis
Year: 2006
Downloads: 84
Quote: 0
Read: Download Dissertation

Abstract


Nano-powders have small particle size, large surface area and high activity. They are often heavily agglomerated during sintering, resulting in unfavorable influence on their properties. In order to solve this problem and obtain ceramics with excellent properties, powder surface modification was adopted in this paper.Tetragonal Zirconia Polycrystals （TZP） stabilized with 3mol% Y2O3 （3Y-TZP） ceramic powders, with an average grain size of 8.9nm, were prepared by precipitation-gel method. Carbon-coated 3Y-TZP powders with better crystalline structure and different carbon content （07.0wt%） were obtained by CVD method.Sintering behaviors and microstructure of carbon-coated 3Y-TZP sintered at normally continuous sintering and two-stage sintering were investigated. Meanwhile effect of carbon content on 3Y-TZP with tiny grain and high relative density was investigated. Results show that compared with carbon-uncoated 3Y-TZP, 3Y-TZP with a little amount of carbon sintered at two-stage sintering by firing the sample at 1250℃ for 5 min and then rapidly cooling down to 1150℃ for 6h could give denser

Related Dissertations

  1. Preparation and Tribological Properties of TZ3Y20A-SrSO4 Ceramic Matrix Composites,TB332
  2. Reactive Hot-Pressing and Mechanical Properties of （ZrB2-ZrO2）/BN Composites,TB332
  3. Microstructure and Mechanical Properties of Mg-Zn-Y-Zr Alloys,TG146.22
  4. Investigation on Microstructure and Properties of Cadmium-Free Silver-Based Intermediate Temperature Filler Metals,TG425.2
  5. Research on Technology and Mechanism of Joining Cemented Carbide to Carbon Steel,TG454
  6. The Preparation and Properties of Reed Woodceramic,TQ174.1
  7. Lightweight Aggregate Made from Waste Residue of Construction、Reclamation of Waste Foundry Sand Dust and Sludge,TU528.042
  8. The Investigations on the Characteristics and Mechanism of NIR Emission from Bi-doped Silicophosphate Glasses,TQ171.1
  9. Study on the Recycling of Post-Consumer Polyester Textiles,X791
  10. Fabricationand Properties of SiC-AlN Multiphase Ceramics Prepared by Gelcasting,TQ174.62
  11. Preparation of Crop Stalk-Based Sorption Materials with High Performances and Their Applications for Pah Removal from Water,X712
  12. Synthesis and Biocompatibility of different types of hydrophilic surface - modified polyurethane,R318.08
  13. Preliminary Study on Salt-Tolerant Mechanism of the New Pennisetum Purpereum Schumach Variety-Sumu No.2,S543.9
  14. Study on the Fine Structure of Intestine and Intestinal Mucosal Barrier in Zebrfish (Brachydanio Rerio),Q95-33
  15. Study on Characteristics of Morphology Anatomy and Physio-Biochemistry of Two Ecotype Varieties Cucumber Leggy Seedilings,S642.2
  16. Study on the Mechanism of Heat-Induced Gelation of Myofibrillar Proteins,TS251.1
  17. Studies on the Aggregation and Microstructure of Imidazolium Ionic Liquids in Solutions,O645.1
  18. Study of the Water-Inrush Mechanism and Prediction of the Water-Resisting Floor,TQ133.1
  19. Study of Performance of Cordierite Combined Mullite Products,TQ175.71
  20. The Research on Preparation Technology and Sintering Behavior of Rare Earth Aluminates (Dy3Al5O12、 NdAlO3、LaAl11O18),TB383.3
  21. Effect of Adding ZrO 2 Nanopowder on Microstructure and Mechanical Properties of Carbon Steel,TB383.1

CLC: > Industrial Technology > General industrial technology > Materials science and engineering > Special structural materials
© 2012 www.DissertationTopic.Net  Mobile