Dissertation > Excellent graduate degree dissertation topics show

Simulation Study on the Spray and Combustion Characteristics of LPG-DEM Blends on the DME Engine

Author: WangHui
Tutor: SuShiChuan
School: Jiangsu University of Science and Technology
Course: Marine Engineering
Keywords: isobaric combustion numerical simulation DME/LPG fuel combination premixed gas combustion characteristics
CLC: TK437
Type: Master's thesis
Year: 2011
Downloads: 15
Quote: 0
Read: Download Dissertation

Abstract


Diesel ideal motive cycle is theoretical analyzed in this dissertation and it is concluded that the heat efficiency is highest when compression-ignition engines realize equipressure cycle. Based on the theory, the combustion process of LPG-DME blends on the dimethyl ether (DME) engine is deeply investigated via the simulative calculation method. The mixture formation and inflammation characteristics are obtained and the injection parameters’effects on the realization of premixing combustion process are also analyzed. In conclusion, synthesizing omnifaceted factors the premixing isopiestic combustion process of DME engine is realized. And the result provides certain reference for further improvement of DME engine efficiency.By theoretical study, maximum combustion pressure of compression-ignition engine must be limited according to the restriction of parts’force. To get high thermal efficiency, the engine should be operated according as constant-pressure heating cycle. Consequently, the combustion mode should be followed premixed approximate isostatic combustion theory. This mode requests combustion heat release in BDC nearly and most of fuel should be injected into the cylinder as far as possible before ignition. By this, the premixed combustion would be achieved in place of traditional diffusion combustion which adopts space atomization combustion mode.By numerical simulation method, the moving mesh model of DME engine is built. And then in standard running condition the process of air fluid, atomization and combustion in cylinder with different LPG ration are investigated. Velocity distribution in-cylinder, spray development, pressure and heat release rate of combustion are shown in detail. The results are shown that:(1) Through the comparison of Mixture concentration field, temperature field and fuel evaporation rate/volume curve, with the increase of LPG content not only the fuel atomization is improved but also the pre-mixed gas concentration is increased and more evenly distributed. On the contrary, the temperature in-cylinder is decreased with the increase of LPG content.(2) Comparison of combustion characteristics parameters such as combustion duration, combustion pressure and heat release rate is investigated. With the increase of LPG content, ignition delay is prolonged; the time of ignition is delayed; the combustion duration of blend fuel is reduced. Combustion pressure in-cylinder is slightly higher and the time reaching peak of heat release rate is delay while the peak of rate is significantly increased. The diffusion combustion part of combustion heat release is decreased with the increase of LPG content.(3) Injection parameters’effects on premixed combustion are also investigated. Based on the above conclusion, pre-mixed constant pressure combustion theory is able to realized by the way of selecting applicable Injection parameters, the content of LPG and other measures which make the combustion model similar to premixed combustion of isosceles triangle of heat release. The above conclusion has important significance to improve the efficiency of compression ignition engine.

Related Dissertations

  1. The Setting Bases of Working Pressure in LNG Systems and Orthogonal Experiment Design of Heat Exchangers,TQ051.5
  2. Numerical Simulation of Film Cooling in Turbine Cascade with Non-Axisymmetric Endwall Method,V231.3
  3. The Analysis on Characteris of Vibration Source about Vertical Vibration of Surrounding Environment Induced by Rail Transit,U211.3
  4. Numerical Study on Phosphorus Distribution in Water Environment of the Three Gorges Reservoir,X832
  5. The Design and Performance Simulation of External Valve Small Displacement Pump,TE933.3
  6. Analysis of the Impact of Tailings Dam Stability under Seepage Role,TV649
  7. On the Simulant Research of the Pneumatic Cleaning Mechanism of Mini-combine Harvester,S225.3
  8. Based on Pro/E Reconstruct Sprinkler Structure and Investigations on Internal Flow Characteristic of the Sprinkler by Numerical Simulation and Experiment Methods,TP391.72
  9. A Study on Application of Seismic Waves to Tunnel Advanced Geological Prediction,P631.4
  10. The Image and Curve Analysis of the Edge Flow and Hemodynamic Numerical Simulation of the Cerebral Contex Ateriole Atherosclerotic and Its Significance,R543.5
  11. Study on the Numerical Simulation for the Propagation Process of 3D Built-In Fractureand of Rock,TU452
  12. Research on Geological Modeling and Remaining Oil Distribution of Block Wei22 in Weicheng Oil Field,P618.13
  13. Study on Formation Mechanism and Optimization of Comprehensive Treating about Large Thick Loess Landslide,P642.22
  14. Theoretical and Experimental Study of Pulse Pumped Ytterbium-doped Double-clad Fiber Laser,TN248
  15. Research on Laws of Overlying Strata and Surface Movement of Deep Strip-Pillar Mining,TD325.2
  16. The Design of Microwave Field Uniformity and Numerical Simulation of Drying Process,TQ051.892
  17. The phosphogypsum dielectric microwave thermal decomposition of the simulation study,TQ177.3
  18. Stress Wave Propagation in Concrete Structure under Impact Loading,TU528.01
  19. The Numerical Simulation of Aerodynamic Performance for New-style Chain-drive Wind Machine,TK83
  20. Study on the Combustion Characteristics of Semi-coke in CFB Combustor,TK16
  21. Circulating fluidized bed boiler combustion characteristics of coal - relations research,TK224.1

CLC: > Industrial Technology > Energy and Power Engineering > Internal combustion engine > Gas fueled internal combustion engines > Run test
© 2012 www.DissertationTopic.Net  Mobile