Dissertation > Excellent graduate degree dissertation topics show

Finite Element Analysis and Structure Optimal Design for Combined Seal at Normal Temperature and Low Temperature

Author: ChenGuoDong
Tutor: HouZhenXiu
School: Harbin Institute of Technology
Course: Mechanical and Electronic Engineering
Keywords: combined seal sealing behaviour finite element analysis structure optimal design
CLC: TH136
Type: Master's thesis
Year: 2008
Downloads: 189
Quote: 1
Read: Download Dissertation

Abstract


It has highly request in seal’s capability and reliability in liquid rocket engine, because the sealing behaviour would influence the whole system. The combined seal in this subject is a kind of dynamic seal in one rocket engine, consisting of one ptfe sliding ring and one O-ring, requested reliable seal at both normal temperature(20℃) and low temperature(-40℃). Finite element analysis about all work conditions of this sealing structure will help to analyze the sealability in the round, find the weakness, optimize the structure, and improve the reliability, which has great significance.Firstly, material property of ptfe and nitrile rubber is analyzed. Because the mechanics behaviour of rubber can not be described simply by modulus of elasticity, stress and strain datas of nitrile rubber are obtained through experiments at 20℃and -40℃. Using finite element software ANSYS, constitutive equations of nitrile rubber at 20℃and -40℃are established.Finite element model of the combined sealing structure is established. After numerical simulation about static work state and reciprocating work state of combined structure at 20℃and -40℃, the stress field, displacement field and deformation of the combined seal is obtained, analyzing the sealing behaviour in all rounds.Based on hydrodynamic theory and resusts of finite element simulation, film thickness calculated is consistent of that of theory. By the method of drawing graph, distribution of film thickness is ploted. Influencing factors to leakage is analyzed in theory, giving guidances to improve the sealing reliability.Simulator investigation is done to the parameters of work condition and structure which influence the sealing behaviour, finding out how working pressure, compression, front angle, back angle, thickness of sliding ring, and offset form the center of O-ring influence the sealing behaviour. Based on this, the sealing structure is optimized, and results of optimization is obtained.In the end of this paper, the failure modality and the factors influencing sealing performance are discussed. The influence of friction, temperatures, and installation accuracy to the failure of the combined seal is selective analyzed. These researches provide comprehensive information for design of this kind of combined sealing structure.

Related Dissertations

  1. Research on the Mainframe System of Powder Mixed EDM and the Craft Experiment,TG661
  2. EDM Electrode Wear Mechanism and Control Research,TG661
  3. Design of Testing Equipment for Electronic Products,TN06
  4. The Research of Bearing Capacity and Influence Factors of Steel-tube Truss Nodal Using Screw,TU392.3
  5. Research of Macro-Micro Driven Ultra-Precision Positioning Stage and Application on Grinder,TG580.23
  6. Research on Harmonic Reducer of New Structural,TH132.46
  7. The Research of Magnetic Driver Simulation System for Magnetic Pump,TH35
  8. Analysis of the Influential Factors on Structure Bearing Capacity of Ancient City Wall of Shanxi Pingyao,TU317
  9. Finite Element Analysis of SiCp/AlSi3 Composites Thermal Residual Stress,TB331
  10. Experimental Study on Non-Dismantling Template of the Concrete Contains Glass Fiber,TU755.2
  11. Calculation and Study on Structure Strength of Twin Hull Sand Dredge,U661.4
  12. Effect of Permeability of Sand Cushion and Geotextile Reinforcement on Embankment Foundation,TV223.4
  13. Research on the Key Technologies of Structural Design of Hydro-Generator Based on Pro/E,TM312
  14. Structural Analysis of the Composite Wind Blade Using Finite Element Method,TM315
  15. Optimization Design and Digital Control Research on Bearingless Permanent Magnet-Type Motor,TM341
  16. Analysis and Research on Capability of Automotive Gearshift System,U463.212
  17. Finite Element Analysis and Control of Interior Composite-Rotor Controllable-Flux Permanent Magnet Synchronous Machine,TM341
  18. Magnetic Field and Performance Analysis of Synchronous Reluctance Permanent Magnet Motors,TM351
  19. The Study of Thermal Charicteristic Model and Calculation Software of High-temperature Sweating Lubricating Omposits,TB331
  20. Optimization Design and Structure Strength Analysis of Working Equipment of 8m~3 Mining Excavator,TD422.2

CLC: > Industrial Technology > Machinery and Instrument Industry > Mechanical parts and gear > Other mechanical components
© 2012 www.DissertationTopic.Net  Mobile