Dissertation > Excellent graduate degree dissertation topics show

Investigation of New VAR Compensator Base on Current Compensation

Author: FengYouQiang
Tutor: LiShiZuo
School: Guangxi University
Course: Proceedings of the
Keywords: reactive power compensation current compensation simulation MATLAB power factor
CLC: TM761
Type: Master's thesis
Year: 2006
Downloads: 210
Quote: 0
Read: Download Dissertation

Abstract


Due to increasing loads of power systems,demand on reactive power was also increasing. Because transmission of reactive power in power systems network can lead to net work loss and step-down voltage,transmission of a great deal of reactive power necessarily resulted in reduction of using efficiency of power energy and severely effected voltage quality. It became necessary means that reactive power compensation devices were installed in proper position of power network.The investigation is a new VAR compensator base on current compensation in this paper. Analyses the detection method of generalized reactive currents(reactive current,harmonic current),it considers the influences of distorted power factor in harmonic current,and the influences of displaced power factor in reactive current.It can improve the precision of detection. It introduces compensation theory and main circuit,and that the mainly study are switches of capacitor and criterions of the device.In one power frequency cycle, the time was averagely division to some intervals.In every intervals, the capacitor was switched.The reactive and harmonic current were compensated by the capacitor current which it obtained through average value in one intervals cycle base on theorem of equivalent impulse. In one power frequency cycle switching capacitor in high frequency,it can insure that the capacitor voltage difference is small,at the same time it can greatly reduce surge current. In control strategies,the current after compensated was require to

Related Dissertations

  1. The Setting Bases of Working Pressure in LNG Systems and Orthogonal Experiment Design of Heat Exchangers,TQ051.5
  2. Study of Interaction between Epoxy Molecules and Carbon Fiber Surface with Molecular Simulation,TB332
  3. Research on Mechanism Analysis and Modeling Simulation of Horizontal Well Tractor,P631.83
  4. Design of Reciprocatingwire Outfit of Mwedmand Research on It’s Control System,TG484
  5. Study on Springback of High-Strength Steel Stamping,TG386
  6. Numerical Simulation and Experiment on Hydroforming of Cups with Controllable Radial Pressure,TG386
  7. Research on Technology and Mechanism of Joining Cemented Carbide to Carbon Steel,TG454
  8. The Brake Performance of Hydraulic Retarder and Simualtion Research on Its Application for Aircraft Arrestment,TH137.331
  9. Satellite Attitude Determination Based on Gyro and Star Sensor,V448.2
  10. Numerical Simulation of Film Cooling in Turbine Cascade with Non-Axisymmetric Endwall Method,V231.3
  11. Research on Orbital Control Method for Space Rendezvous and Docking,V526
  12. High Speed Aerodynamic Convection and Coupled Heat Transfer of Complicated Bodies,V215.4
  13. The Analysis on Characteris of Vibration Source about Vertical Vibration of Surrounding Environment Induced by Rail Transit,U211.3
  14. Single Neuron PID Control for Electro-Hydraulic Servo Unit of Ship Rudder,U666.152
  15. Simulation Analysis on Temperature Stress of RCC Arch Dam and Its Construction Joints Design Research,TV642.2
  16. Study on the Heat Transfer Characteristics of Particle Cluster in Circulating Fluidized Bed,TK124
  17. Numerical Simulation of SNCR Process of a 600MW Utility Boiler,TK222
  18. Numerical Simulation of Biomass Direct Reburning,TK16
  19. Numerical Simulation on Pulverized Coal Combustion Process in a 670T/H Tangential Firing Furnace,TK224.11
  20. Numerical Simulation on the Combustion Process in the Furnace of a 1000MW Lignite-Fired USC Boiler,TK224.11
  21. Study on Gas-Solid Two-Phase Flow in Spouted Beds,TK173

CLC: > Industrial Technology > Electrotechnical > Transmission and distribution engineering, power network and power system > Power system automation > Automatically adjusts
© 2012 www.DissertationTopic.Net  Mobile