Dissertation > Excellent graduate degree dissertation topics show

Research on the DSP-controlled Multifunctional Data Acquisition System

Author: SongHengLi
Tutor: DongHaoBin
School: China University of Geosciences
Course: Detection Technology and Automation
Keywords: DSP multifunction data acquisition FFT
CLC: TP274.2
Type: Master's thesis
Year: 2005
Downloads: 706
Quote: 3
Read: Download Dissertation

Abstract


The DSP-controlled multifunctional data acquisition system is designed with CPLD architecture to synchronously measure the multiple channel signals. This system could be applied flexibly to measure and identify the magnitude and phase of the various signals in such tough environments as the modern seismic exploration and electric method of the geophysics. In general, this expandable and adaptive data acquisition system is the future trend with promising application field.This thesis gives a brief introduction to the application of DSP plus CPLD in DAQ. Based on the specific requirement of geophysics instruments, the Schematic, System hardware architecture as well as the supporting software are illustrated carefully in the respective chapters. The hardware setup of the DAQ system consists of two modules: the analogue circuit and the digital circuit. In the analogue module, synchronous amplify, acquisition, anti-alias filter and power frequency notch filter are designed. While in the digital parts, the DSP core completes the consequent processing to measure signal phase. And the CPLD part controls the address/data allocation and multi-channel clock synchronization. The design of hardware is discussed in detail. An approximately linear phase wave filter is designed to replace the signal process circuit used ever after analyzing the phase wave on the filter. The detail circuit diagram of amplifier is also offered. The CPLD download cable, by which the timing simulation of CPLD’s controlling 16-bit serial interface ADC is achieved, has been made successfully. The interface of large volume dual port RAM and DSP+CPLD is realized creatively. A new software method of measuring phase is decided for the reason of large error of hardware method, which is analyzed in detail. The paper gives a technique of expand extern memory in a DSP system and designed the interface between DSP and upper PC. Practical experiences of anti-jamming in design of PCB are summarized except for the boot loading of DSP.The software design includes two parts. One is the FFT, which is core algorithm in this DAQ system. Also some codes with schematic is given in this thesis. The other part is the upper PC, which implements two functions: human-machine interface and the serial port communication. A detailed flowchart as well as the source code is provided consequently.In the following chapters, the debugging steps are discussed to give a full and precise

Related Dissertations

  1. Design and Development of Application Programme for Fault Analyzer Based on Wince Platform,TP311.52
  2. Design of Electronicalcontrol System for Electronic Jacquard Knitting Machine,TS183
  3. Research on the Integrated Grating Subdividing Digital Display Device Based on DSP,TH822
  4. Research on the Aiming Signal Processing of the Optical Probe Measurement System,TH74
  5. Study on Two Dimensional of Auto-Collimator Based on DSP,TH741.14
  6. Research on Synchronous Acquisition and Processing System Detecting Defocus Signal Based on DSP,TH741
  7. Study on the Control System for Automatic Aiming of HWIL Pitching Mechanism,TJ303
  8. Study of Automobile Ignition Coil Testing System Based on Standard LAH032.905,U472.9
  9. Research on Synchronous Motor Excitation Control System,TM341
  10. The AES Algorithm and Its Implementation in DSP,TN918.1
  11. The Design of a DSP-Based Robot Speech Command Recgnition System,TN912.34
  12. Research on Signal Receiving System of Phase Laser Range Finder,TN249
  13. Study on Implementation Technology of Channel Estimation in OFDM System Based on DSP,TN919.3
  14. Optimizing and Realising Research on Vedio Compression in TV Guidance System,TN919.81
  15. Voice Signal De-noise Base on Wavelet and Arithmetic Implement with DSP,TN912.3
  16. Research on Image Compression and Implementation Using TMS320C6713 Based on SPIHT Algorithm,TP391.41
  17. A Study on the Technology of the Infrared Image Matching,TP391.41
  18. Design of High-Speed Data Acqusition Board Based on Signal Integrity Analysis,TP274.2
  19. Development of 3-Dimensional Scanning Probe Data Acquisition System Based on DSP,TP274.2
  20. Development of Vxibus Common Interface Module Based on DSP,TP274
  21. Research of Acoustic Signal Acquisition System Based on DSP,TP274.2

CLC: > Industrial Technology > Automation technology,computer technology > Automation technology and equipment > Automation systems > Data processing, data processing system > Data collection and processing systems
© 2012 www.DissertationTopic.Net  Mobile