Dissertation > Excellent graduate degree dissertation topics show

The Reserch of Digital Design for Low Temperature Screw Presser Based on Solidworks

Author: YaoLiXin
Tutor: WangTaiYong
School: Tianjin University
Course: Mechanical Manufacturing and Automation
Keywords: Low Temperature Screw Presser Digitized Design The Secondary Development SolidWorks Virtual assembly Virtual manufacturing Optimization design Finite element analysis
CLC: TS222
Type: Master's thesis
Year: 2010
Downloads: 156
Quote: 1
Read: Download Dissertation

Abstract


Product design in today’s manufacturing industry plays an increasingly important role. With the rapid development of technology, modern design gradually replaces the traditional design methods, and digital design technology is more typical of modern design. Digital design technology is the embodiment of modern technology, while the development of modern design to create the conditions. To this end, their study is significant. Although the system of Chinese oil pressing equipment taken many varieties, but the comparison countries, product technology, product structure and product performance there is still a gap analysis of the reasons, needs to be improved in design methods. This article digital design technology to oil pressing equipment, changes the traditional design pattern, and strives to improve the overall design and manufacturing facilities in China Grain and Oil level efforts.In this paper, low-temperature cold-pressed oil press as the starting point, based on SolidWorks development platform of digital design theory and related technologies, including the following major elements:Digital design method is applied in low temperature Screw presser design and manufacture process to find digital product model and the technology which include interference check-up,digital simulation and engineering analysis is used to improve design plan and enhance product exploitation efficiency and product performance. The feature-based on modeling and parameter driving modeling is used to realize the semi-automatic or automatic building for the components of low temperature Screw presser. The secondary development platform of 3D digital is built and the virtual test of performance is realized. Finite element analysis and optimization design are used in components of low temperature screw presser.Because low temperature cold pressing technique could preserve polyunsaturated fatty acid and other sanitarian substances, low temperature screw press can be used of many kinds of oil plants,especially in producting healthy oil.After experiment Low temperature Screw presser has used in practice and achieved good economic and social benefits.

Related Dissertations

  1. Research on the Mainframe System of Powder Mixed EDM and the Craft Experiment,TG661
  2. EDM Electrode Wear Mechanism and Control Research,TG661
  3. Development of the Platform for Compressor Optimization Design and Aerodynamic Optimization Design in the Transonic Compressor,TH45
  4. Finite Element Analysis and Structure Optimal Design for Combined Seal at Normal Temperature and Low Temperature,TH136
  5. Investigation of Turbine S2 Stream Surface Direct Problem Aerodynamic Optimization Design,V235.11
  6. Study on the Design and Biomechanical Behaviors of Individualized Artificial Knee Joint,R318.1
  7. Design of Testing Equipment for Electronic Products,TN06
  8. The Dynamic Performance Analysis of Oil Pumping Center and Structural Optimization of Improvement,TE933.1
  9. Finite Element Analysis and Optimization Design of a Tractor Cab,S219.02
  10. Multi-pin Internal Fixation of Calcaneal Fractures in Finite Element Analysis,R687.3
  11. Medical Application of a Wireless Communication Platform Based on RFID and GPRS,R319
  12. The magnetorheological damper mechanical properties and Gun Recoil,TB535.1
  13. Nonlinear Structural Dynamics Analysis and Optimization Design on Naval Gun Driver,TJ391
  14. Design and Analysis of Automatic Steel Pipes Butt Tool,U673.38
  15. Analysis on Unloading of Large Span Steel Structures and Research on Its Mechanical Analysis,TU391
  16. Parametric Design of Flow Channels and Analysis of the Flow Field,TP391.72
  17. The Practical Research on Secondary Development of Junior High School Geography under the New Curriculum,G633.55
  18. AutoCAD Mechanical design aids based research and development,TH122
  19. Simulation of the Clinching Process Using FEA Method with Steel and Aluminum Alloy Sheets for Automotive Sunroof Frame,U463.83
  20. Research and Implementation of Huamei Gongchan Food Co. Ltd ERP System,TP311.52
  21. Casting process CAD software Development,TP391.72

CLC: > Industrial Technology > Light industry,handicrafts > Food Industry > Edible oils and fats processing industry > Oil raw materials
© 2012 www.DissertationTopic.Net  Mobile