Dissertation > Excellent graduate degree dissertation topics show

Gear measuring center measurement and control software development

Author: FuZuo
Tutor: WangZiBin；XieHuaZuo
School: University of Electronic Science and Technology
Course: Software Engineering
Keywords: Gear Gear Measuring Center Electronic generating method Tooth profile deviation Helix deviation Pitch deviation
CLC: TG86
Type: Master's thesis
Year: 2010
Downloads: 84
Quote: 0
Read: Download Dissertation

Abstract


Gear as a transmission components are widely used with various types of mechanical devices , while the geometric accuracy of the gear teeth directly affect the performance of the transmission , so the need for the gear precision of detection . CNC ( computer numerical control ) gear measuring center is a combination of new gear electromechanical meter , it has the advantages of high accuracy, and convenient function expansion . CNC Gear Measuring Center by the computer system , the measurement and control system and mechanical system has three major components . This thesis focuses on the gear precision detection problem , CNC gear measuring center as the carrier gear error indicators detected as the main object of study in depth analysis of errors the formation fully understood Electronics Show measurement principle based on the gear the principle of measuring center of measurement and control software , and discusses the main functions of the software , the design of the overall design and main modules ; and the use of the VC program development language , and to develop a better set of gear measuring software , the gear tooth profile , helix and tooth pitch of the measurement of the deviation . Show that the actual use of the measurement and control software has a simple , flexible, high degree of automation and human-machine interface .

Related Dissertations

  1. Study on Technology of Straight Bevel Gear Measurement and Error Evaluation,TG86
  2. Research on the Technology of Measurement and Error Evaluation of Gear Hob,TG721
  3. Research on the Structure and Characteristics of Permanent Magnetic Coupling,TH139
  4. Tooth Profile Modeling and Machining Error Analysis of the Face Gear,TH132.41
  5. Analysis of Flexspline Stress and Tooth Wear in Harmonic Gear Drive,TH132.43
  6. Research on the Electromagnet Lock of Earth Fault Protection for 10kV Switchgear,TM591
  7. Design and Simulation of Hot Precision Forging Die for Spur Bevel Gear,TH132.41
  8. Anlysis and Control the Noise of Low Pressure Gear Pump,TH325
  9. Research on Network Coding and Its Applications,TN915.01
  10. Analysis and Optimization for Gear Whine of Transmission,U463.2
  11. Failure Analysis and Processing Technology Improvement of the Bicycle Flywheel Parts and Its Molding Die,U484
  12. Chracteristic Analysis of Dual-drive Planetary Gear Reducer with Large Power of Shield Machine,TH132.46
  13. The gear dynamic transmission error precision test of system design and analysis,TH132.41
  14. Development of Comprehensive Test System on Gear Drive,TH132.41
  15. Parameterized Mould-making of Face Gear with Helical Involute Pinion Used on Fishing Tackle Industry,S972
  16. Research on Optimal Design of Marine Enclosed Epicyclic Gear,U664.22
  17. Study of Close Power Transmission Experiment Device and Speed Reducer Power Effeciency Measurement Method,TH132.425
  18. The Research on Pure Water Hydraulic External Gear Pump,TH325
  19. Research and empirical analysis of the wind turbine gearbox lean production model,F273
  20. Modification Research of High-speed and Heavy-load Gear Based on Thermo-elastic Deformation,TH132.41
  21. Landing Gear Drop Simulation Based on Semi-active H_∞ Control Approach,V226.2

CLC: > Industrial Technology > Metallurgy and Metal Craft > Tolerance techniques to measure and mechanical measuring instruments > Gear measuring its meter
© 2012 www.DissertationTopic.Net  Mobile