Dissertation > Excellent graduate degree dissertation topics show

Deviation Calculation and Accuracy Assessment of Involute Cylinder Gear

Author: PengHaoKun
Tutor: QianZhiLiang
School: Suzhou University
Course: Mechanical Design and Theory
Keywords: involute cylindrical gear tooth measurements tooth profile deviation pitch deviation spiral deviation
CLC: TH132.41
Type: Master's thesis
Year: 2011
Downloads: 94
Quote: 0
Read: Download Dissertation

Abstract


Gears are widely used in various types of machines and equipments. To ensure the quality of gear mechanism transmission, the deviations of workpiece should be detected in order to test wheather their accuracy meets appropriate requirements or not. There are many types of gear deviation, also with lots of choices about testing equipments and ways. Considering the popularization of Three Coordinate Measuring Machine and its high precision, in this paper, we adopt the involute cylindrical gear as research object, and explore ways and means to detect gear deviation with Three Coordinate Measuring Machine. The Main contents of this thesis are as follows:(1) Based on the introduction of accuracy levels and deviation projects of involute cylindrical gear, measurement scheme was established to measure tooth profile and spiral line of involute cylindrical gear by using Three Coordinate Measuring Machine.(2) Involute normal method and involute direct fitting method of calculating tooth profile deviation were presented, and the advantages and disadvantages of these two methods were analyzed. On this basis, a new method was proposed to calculate tooth profile deviation named fitting involute-equivalent calculation, and the corresponding mathematical model established.(3) Two new methods was introduced according to the tooth pitch derivation of measure result, one named fitting involute-pitch circle intersection point method and the other named normal vector of pitch circle measurement method, with the advantage and disadvantage analyzed. On this basis, a extended interpolation method was proposed to fit involute, which is intersected at the arbitrary circular and established mathematical model of calculating pitch deviation.(4) A relative polar angle method of measuring points was presented to calculate spiral deviation. Inspired by this method, a spiral expansion measurement method was found, and the corresponding mathematic model was established to calculate spiral deviation.Finally, by taking an involute spur gear as an example, its tooth profile was measured by Three Coordinate Measuring Machine, and the gear deviation was computed through Matlab, which prove the feasibility and accuracy of this method.

Related Dissertations

  1. Development and Research of the Involute Cylindrical Gear Transmission Based on the VB Second Development SolidWorks,TH132.41
  2. Gear measuring center measurement and control software development,TG86
  3. Development of Software of Gear Measurement Center,TP311.52
  4. Assessment of the Accuracy of Tooth Morphological Measurement Using Different Methods,R783.5
  5. Measurement Error Separate and Simulation Studies for Large Gear Based on Rack-shaped-edge Probe,TG86
  6. Measurement and Evaluation of Involute Cylindrical Gear Based on Gear Measurement Center,TG86
  7. Gathering and Analyzing the Error Signal On-machine Measuring the Accuracy of Large Gears,TG86
  8. Research of On-Line Measuring Principle and Technology of Large Gears Pitch Error,TG86
  9. Involute Gear Characteristic Line Measurement Theory and Applied Research,TG86
  10. The Contact Analysis and Profile Modification of the Involutes Gear,TH132.41
  11. Measuring and Controling System Develops on Gear Measuring Center,TG86
  12. Large gear reign meter structure and control system development,TG86
  13. CAD of GS Series Involute High Speed Cylindrical Gear Unit,TP391.72
  14. The Reseach of Elasticity Creep between Rail and Ring in Double-Disc Involte Instrument,TG86
  15. Study on Data Acquisition and Control System in Double-Disc Measuring Apparatus of Involute Tooth Profile,TG86
  16. Evaluation of Measurement Uncertainty for Modified Gear Testing Centre Mahr891E,TP274
  17. The Optimize of Measuring Element and Error Analysis in Double-Disc Measuring Apparatus of Involute Tooth Profile,TG86
  18. Tooth Profile Modeling and Machining Error Analysis of the Face Gear,TH132.41
  19. Development and Research of the Involute Cylindrical Gear Transmission Based on the VB Second Development SolidWorks,TH132.41
  20. Aircraft electromechanical servo system harmonic gear transmission Dynamic Performance Analysis and Research,TH132.41

CLC: > Industrial Technology > Machinery and Instrument Industry > Mechanical parts and gear > The transmission mechanism > Meshing > Gears and gearing
© 2012 www.DissertationTopic.Net  Mobile