Dissertation > Excellent graduate degree dissertation topics show

Fabrication of Optical Fiber Probes

Author: YangXiuWen
Tutor: TangYiWen
School: Central China Normal University
Course: Theoretical Physics
Keywords: scanning probe microscopy scanning tunneling microscopy atomic force microscopy Raman spectroscope Fiber probe surface-enhanced Raman scattering (SERS) transmission efficiency Laser Ablation Chemical etching
CLC: TN253
Type: Master's thesis
Year: 2006
Downloads: 289
Quote: 0
Read: Download Dissertation

Abstract


SPM is based on scanning sample surfaces using the tip of optical probe, it obtained the imagine information about the object surface, It successfully extended the resolution of conventional optical microscope beyond the diffraction limit. It can be used to observe and study sample’s topography and internal characters in submicron scale by optical method. SPM has already been a very useful tool to research microcosm and it has been applied in the fields of material science, biological engineering and information technology extensively. Probe is SPM’s central component, which is different in various microscopes. We attempted to fabricate optical fiber probe In this paper, we mainly studied three aspects,as follows:一、 The fabrication of optical fiber probeThe optical fiber probe is prepared with the melt-pulling, the etching, the tube etching, the pulling-etching, Laser ablation method, By the experiments, the The shape of Fiber probe had been analyzed and compared. It had been shown that probe: cone-shape transition region of probe by the melt-pulling is slightness and obtains the probe cone angle is not big (8°—35°). Probe by the etching and the tube etching may cause the probe with the short cone-shape transition region, loses slightly, cone angle is big (15°-65°), but when prepares the bigger cone angle optical fiber probe, the surface starts to change is rough. Probe by the pulling-etching has an area of the change cone angle. Probe by the laser ablation be easy to obtain the big cone angle, and the surface is smooth.The tips diameters are in the range of 80-200 nm ,and the taper angle 40°-81°,transm ission efficiency of 3.5×10-3.二、 The study of optic property of probeTransmission properties of optical fiber probe are discussed in this paper. The transmission efficiency of the probe is measured. The probe of transmission efficiency versus coning angle is given. By the experiments, the transmission properties had beenanalyzed and compared. It had been shown that the optical fiber probe with 30°-55°is a Fiber-Optic Nano-Probes with High Transm ission Efficiency and High Resolving power. Simultaneity ,the transmission efficiencies versus the wavelength are given.三、 Studies Optic Fiber Probe of surface-enhanced Raman scattering

Related Dissertations

  1. Electroporation Assisted Surface-enhanced Raman Spectroscopy for Living Cells,R318.51
  2. Water-mdeiated Ablation of Hard Biotissue with Pulse Lases,R318.51
  3. Study on Electrochemistry and Raman Spectrum of Picoline Electro-Oxidation Beavior in Non-aqueous System,O626.321
  4. APTES and protein A -based joint immobilization technology hepatitis B virus immunization sensitive film for biosensor research,TP212.3
  5. An Investigation in Surface Morphology, Component and Pulp Chamber Temperature of Dentin Irradiated with Erbium Laser,TN249
  6. Lead laser ablation pit modeling and single pulse laser-induced breakdown spectroscopy,TN247
  7. Study on the Scanning Probe Lithograph by Atomic Force Microscopy,TS825
  8. Converter Full Suspension the tilting device design optimization and tilting Moment analysis,TF748.2
  9. Nanoscale in-Plane Deformation Studies Using Atomic Force Microscopy and Digital Image Correlation Techniques,TG806
  10. Research on the Optimization and Mechanism of Copper Electrochemical Mechanical Planarization,TG174.42
  11. The Raman Spectroscopic of DNA Molecules,Q522
  12. Based on research and application of anodic alumina template,TB383.1
  13. Preparation and Properties of Polyaniline-Noble Metal Nanocomposites,TB383.1
  14. Surface Modification of Gold Nano-sol and in the Application of pH Sensors,TB383.1
  15. Preparation of Nanocrystal Silicon/polymer Composites and Study on Their Opto-electronic Properties,TB383.2
  16. Morphology of the Mixed LB Films of PS and PS-b-PMMA,O631.3
  17. Inductively Coupled Plasma Mass Spectrometry(ICP-MS) and Laser Ablation Techniques and Their Application in Solid Materials,O657.63
  18. AFM-based wholly circular blade diamond tool edge sharpness detection and evaluation of technical research,TG711
  19. Gas-liquid interface in the assembly of DNA and Fluorescence Properties of,TB383.2
  20. The Fabrication and SERS Research of Cu/Ni Core/Shell Nanocable Arrays,TB383.1
  21. Synthesis and Properties of Silicon Nanowire Arrays,TB383.1

CLC: > Industrial Technology > Radio electronics, telecommunications technology > Photonics technology,laser technology > Optical waveguide and integrated optics > Fiber optic components
© 2012 www.DissertationTopic.Net  Mobile