Dissertation > Excellent graduate degree dissertation topics show

Hot Deformation Behavior of the Al-Zn-Mg-Cu-Zr Alloys During Compression at Elevated Temperature

Author: JinNengPing
Tutor: ZhangHui
School: Hunan University
Course: Materials Processing Engineering
Keywords: Al-Zn-Mg-Cu-Zr alloys Hot compression deformation Constitutive relationship Dynamic recrystallization Dynamic precipitating
CLC: TG146.21
Type: Master's thesis
Year: 2009
Downloads: 76
Quote: 1
Read: Download Dissertation

Abstract


Al-Zn-Mg-Cu-Zr alloys have a combination of high strength and fracture toughness, as well as resistance to stress corrosion cracking that renders them very useful in the aircraft and aerospace industry applications. As China’s aerospace, aviation, weapons and equipment, especially in space industry has been developed very rapidly in recent years, higher requirements for properties of materials are demanded. In this present, the hot deformation behaviors of two different Al-Zn-Mg-Cu-Zr aluminum alloys （7150 alloy and 7056 alloy） were studied by means of compression deformation tests on Gleeble 1500 machine at strain rates ranged between 0.01s-110s-1 and deformation temperature 300℃450℃,and associated structural changes were studied by observations of metallographic and TEM. The results are shown as following:1. The true stress - true strain curves of 7150 and 7056 aluminum alloys both appear steady-state deformation features apparently. At low strain rate, the true stress increases with true strain rapidly and enters a steady state after reached peak flow. At high strain rate, the true stress decreases sharply after the peak, then the curves enter steady-state deformation stage.2. Maximum stress for 7150 and 7056 aluminum alloy both can be represented by a Zener-Hollomon parameter in the hyperbolic-sine-type equation with the hot deformation activation energy Q of 226.6988KJ/mol and 244.6442KJ/mol.3. The microstructure of 7150 and 7056 aluminum alloy after hot compression deformation transform from dynamic recovery to dynamic recrystallization as decreasing the value of parameter Z.4. The number and distribution of dislocation change with deformation condition. Decreasing of Z value, that is increasing deformation temperature or decreasing strain rate, leads to a large number of dislocations neutralize and the density of dislocation decrease. During compression process, the dynamic precipitation of precipitates increase as increasing of parameter Z, which results in the level of flow stress under low deformation temperature and high deformation rate much higher than under high deformation temperature and low deformation rate.5. The grain size of 7150 aluminum alloy after compression is less than which of 7056 aluminum alloy under the same conditions.The precipitations of 7150 alloy are much more that of 7056 alloy, but the precipitations size are finer than 7056 alloy.All of these maybe result in the flow stress level of 7150 alloy beyond 7056 alloy.

Related Dissertations

  1. Effect of Rare-earth Elements on Dynamic Recrystallization and Texture of AZ31 Wrought Magnesium Alloy during Hot-rolled,TG339
  2. Al-Cu-Mg resistant aluminum alloy containing Ag thermal simulation , thermal exposure and creep behavior,TG132.33
  3. Researches on the Rolling of Magnesium Alloy Sheet and Simulation,TG339
  4. 2124 aluminum alloy homogenized thermal simulation,TG146.21
  5. Research on the FEM Simulation of Metal Micro-cutting Process,TG506
  6. Investigation on Hot Deformation Behavior of Ferritic Stainless Steel,TG142.71
  7. Effect of Electric Pulses on Drawability and Corrosion Property of AZ31 Magnesium Alloy,TG146.22
  8. The Effect of Cooling Way on the Microstructure and Mechanical Property of High Rise Building Steel Q345GJ,TG335
  9. Development of Heavy 9Ni Steel Plate Product Process for Ultra-low-temperature Application,TG142.15
  10. The Organization and Performance Prediction of TA15 Titanium Alloy Heat Spinning Based on the Plane Compression Model,TG146.23
  11. Axial Constitutive Relationship and Seismic Performance of FRP Confined Column,TU375.3
  12. Study on Characteristics of Heavy Forging Material 30Cr2Ni4MoV Steel in Hot Deformation,TG142.15
  13. Microstructure Evolution of Mg-10Gd-3Y Alloy during Thermal Plastic Deformation,TG146.22
  14. Nonlinear Finite Element Analysis of Reinforced Concrete Based on OpenSees and Experimental Comparesion,TU375.3
  15. Study on High Strength and High Performance Concrete Applied to Steel Reinforced Concrete Structure and Its Damage Constitutive Relationships,TU398.9
  16. Experimental Studies on the Influence of Marine Environment to Concrete Structure,TU375
  17. Study on the Microstructures and Mechanical Properties and the Fracture Behavior of the Al-Zn-Mg-Cu-Zr Alloys,TG146.21
  18. Study on Microcosmic Mechanism of Adiabatic Shear Behavior in Orthogonal Cutting of High Strength Steel,TG506
  19. Prediction of Adiabatic Shear in High Speed Machining Based on Linear Pertubation Analysis,TG506.1
  20. Simulation of Q235 Steel Recrystallized Microstructure during Hot Forming Process,TG142.15

CLC: > Industrial Technology > Metallurgy and Metal Craft > Metallurgy and Heat Treatment > Metallic materials > Non - ferrous metals and their alloys > Light non-ferrous metals and their alloys > Aluminum
© 2012 www.DissertationTopic.Net  Mobile