Dissertation > Excellent graduate degree dissertation topics show

The Upsetting Forging Process and Numerical Simulation for A New Type of Sucker Rod

Author: LiuChang
Tutor: HuangZaoWen
School: Huazhong University of Science and Technology
Course: Materials Processing Engineering
Keywords: plug-in torque rod plastic forming process analysis numerical simulation die forging
CLC: TG316
Type: Master's thesis
Year: 2009
Downloads: 28
Quote: 0
Read: Download Dissertation

Abstract


In recently years, with the development of petroleum industry, the upset forging technology of sucker rod has been constantly improved in our country. We have developed many new types of sucker rods to meet the need of different oil wells. They are applied in actual production and obtain good social benefits and economic benefits. Different from traditional sucker rods, they adopt new materials, new technology and new structures, so they have high property and long service period. The plug-in torque rod is a new kind of sucker rod which has a skewed slot and convex wedge at its two ends. The plug-in joint model can solve relative rotation between the sucker rods, avoiding the eccentric wear and break-off.At first, the development and application of sucker rod and the metal plastic simulation method are introduced briefly. Besides, the basic principle of process analysis and die design for sucker rod is expounded concretely.By means of numerical simulation and experimental study, this article makes a deep research on the precision forging process of plug-in torque rod and its key process technology. By analyzing the forging process of the plug-in torque rod, two forming process schemes are drafted and their process parameters are adjusted. According to the forming process, three dimensional entity models of the sucker rod and its forging die are set up. After choosing appropriate process parameters, the whole forging procedure are analyzed and simulated with finite element analysis software DEFORM-3D. The results indicate the inner stress field, strain field, temperature field and forging travel-load curve during the forming procedure. The forming statuses, causation of defect of workpiece are also predicted. When grasping the metal flowing law, meanwhile, considering the die manufacturing cost and the forming stability, this thesis finally determines the optimum forming process scheme.The process parameters have been properly adjusted to make the forming process and upset forging die more reasonable. For further research on upset forging process and FEM simulation, some opinions and suggestions are put forward. At present, the die has been successfully used in the production of plug-in torque rod and achieved good social and economic benefits.

Related Dissertations

  1. The Setting Bases of Working Pressure in LNG Systems and Orthogonal Experiment Design of Heat Exchangers,TQ051.5
  2. Study on Springback of High-Strength Steel Stamping,TG386
  3. Numerical Simulation and Experiment on Hydroforming of Cups with Controllable Radial Pressure,TG386
  4. Research on Technology and Mechanism of Joining Cemented Carbide to Carbon Steel,TG454
  5. Numerical Simulation of Film Cooling in Turbine Cascade with Non-Axisymmetric Endwall Method,V231.3
  6. High Speed Aerodynamic Convection and Coupled Heat Transfer of Complicated Bodies,V215.4
  7. The Analysis on Characteris of Vibration Source about Vertical Vibration of Surrounding Environment Induced by Rail Transit,U211.3
  8. Study on the Heat Transfer Characteristics of Particle Cluster in Circulating Fluidized Bed,TK124
  9. Numerical Simulation of SNCR Process of a 600MW Utility Boiler,TK222
  10. Numerical Simulation of Biomass Direct Reburning,TK16
  11. Numerical Simulation on Pulverized Coal Combustion Process in a 670T/H Tangential Firing Furnace,TK224.11
  12. Numerical Simulation on the Combustion Process in the Furnace of a 1000MW Lignite-Fired USC Boiler,TK224.11
  13. Study on Gas-Solid Two-Phase Flow in Spouted Beds,TK173
  14. Experimental Study and Numerical Simulation on Aerodynamic Field of Tangential Bias Swirl Burner,TK223.23
  15. Characteristic Study of Combustion in Central Reverse Flame Chamber,TK223.21
  16. Numerical Simulation and Contrastive Analysis of Labyrinth Seals and Leaf Seals,TK263.2
  17. Numerical Study on Phosphorus Distribution in Water Environment of the Three Gorges Reservoir,X832
  18. The Design and Performance Simulation of External Valve Small Displacement Pump,TE933.3
  19. Analysis of the Impact of Tailings Dam Stability under Seepage Role,TV649
  20. Study on Hydraulic Fracturing of Low Permeability Reservoir,P618.13
  21. Numerical Simulation and Experimental Study of Air-Assisted Sprayer of Orchard,S491

CLC: > Industrial Technology > Metallurgy and Metal Craft > Metal pressure processing > Forging, forging and blacksmith > Forging process
© 2012 www.DissertationTopic.Net  Mobile