Dissertation > Excellent graduate degree dissertation topics show

Investigation on Cold Stamping-forging Hybrid Forming Technology for Large-thickness-difference Parts

Author: OuYangKun
Tutor: WangXinYun
School: Huazhong University of Science and Technology
Course: Materials Processing Engineering
Keywords: stamping-forging hybrid forming thickening-drawing large-thickness-difference parts numerical simulation
CLC: TG386
Type: Master's thesis
Year: 2009
Downloads: 44
Quote: 0
Read: Download Dissertation

Abstract


Many structural parts with large surface area and large-thickness-difference are manufactured by casting or welding method. Considering the requirement of lightweight structures, the overall plastic formation technology, stamping-forging hybrid forming technology is employed to form this kind of parts. The inside wall thickness of the double-cylinder-shaped workpiece studied in the paper is 4mm while other region only 2mm. So the stamping-forging hybrid forming technology was made that firstly forward drawing the outside cylinder, then powerful backward thickening-drawing the inside cylinder to store enough metal, and last upsetting the inside cylinder.Assuming the shell element, the FEM software eta/DYNAFORM was firstly utilized to research the material flow of the stamping process and to analyze the impact of the binder force in the forward drawing, the shape of pressure ring and binder, the velocity of the pressure ring, the binder force and the gap between punch and punch-die to the thickening result of the inside cylinder in the backward drawing. Then assuming the hexahedron element, the general FEM software MSC.Marc/Mentat was utilized to research the material flow of forging process and to analyze the impact of the binder shape and the upset ratio distribution to the upsetting result.It’s shown that in the powerful backward thickening-drawing process the pressure ring and binder with a fillet can force the outer cylinder metal to flow to the interior. The minimum and maximum thicknesses of inside cylinder increase monotonously with the pressure ring velocity until they reach the peak value. And the thickening result of variable binder force is better than constant one. In the forging process the binder adding a fillet near the insider cylinder can effectively guide the material flow and avoid bulking. The insider cylinder needs a two-step upset process to reach 4mm.With referencing the forming rule by FEM, experiments were carried out to verify the thickening result of the inside cylinder, and had a good agreement with numerical simulation results.The technology that firstly storing materials by stamping and then thickening by forging will make some changes to that the sheet parts usually have a uniform thickness or slightly thinned. The theory and experiment foundation of the overall plastic formation technology were established for the big-thickness-difference parts of automotive and aerospace field.

Related Dissertations

  1. The Setting Bases of Working Pressure in LNG Systems and Orthogonal Experiment Design of Heat Exchangers,TQ051.5
  2. Study on Springback of High-Strength Steel Stamping,TG386
  3. Numerical Simulation and Experiment on Hydroforming of Cups with Controllable Radial Pressure,TG386
  4. Research on Technology and Mechanism of Joining Cemented Carbide to Carbon Steel,TG454
  5. Numerical Simulation of Film Cooling in Turbine Cascade with Non-Axisymmetric Endwall Method,V231.3
  6. High Speed Aerodynamic Convection and Coupled Heat Transfer of Complicated Bodies,V215.4
  7. The Analysis on Characteris of Vibration Source about Vertical Vibration of Surrounding Environment Induced by Rail Transit,U211.3
  8. Study on the Heat Transfer Characteristics of Particle Cluster in Circulating Fluidized Bed,TK124
  9. Numerical Simulation of SNCR Process of a 600MW Utility Boiler,TK222
  10. Numerical Simulation of Biomass Direct Reburning,TK16
  11. Numerical Simulation on Pulverized Coal Combustion Process in a 670T/H Tangential Firing Furnace,TK224.11
  12. Numerical Simulation on the Combustion Process in the Furnace of a 1000MW Lignite-Fired USC Boiler,TK224.11
  13. Study on Gas-Solid Two-Phase Flow in Spouted Beds,TK173
  14. Experimental Study and Numerical Simulation on Aerodynamic Field of Tangential Bias Swirl Burner,TK223.23
  15. Characteristic Study of Combustion in Central Reverse Flame Chamber,TK223.21
  16. Numerical Simulation and Contrastive Analysis of Labyrinth Seals and Leaf Seals,TK263.2
  17. Numerical Study on Phosphorus Distribution in Water Environment of the Three Gorges Reservoir,X832
  18. The Design and Performance Simulation of External Valve Small Displacement Pump,TE933.3
  19. Analysis of the Impact of Tailings Dam Stability under Seepage Role,TV649
  20. On the Simulant Research of the Pneumatic Cleaning Mechanism of Mini-combine Harvester,S225.3
  21. The Construction Monitoring and Deformation Control and Analysis of the Box Culvert Jacking of the YouQuan Road Through the Hukun Railway,U449.5

CLC: > Industrial Technology > Metallurgy and Metal Craft > Metal pressure processing > Cold stamping ( sheet metal processing) > Cold stamping process
© 2012 www.DissertationTopic.Net  Mobile