Dissertation > Excellent graduate degree dissertation topics show

Study on Stability Analysis and Control Technplogy of Surrounding Rock in Deep-Seated Soft Rock Roadway

Author: WeiMingLi
Tutor: LinDengGe
School: Shandong University of Science and Technology
Course: Geotechnical Engineering
Keywords: deep-seated soft rock roadway support groundstress numerical simulation pressure
CLC: TD353
Type: Master's thesis
Year: 2010
Downloads: 287
Quote: 0
Read: Download Dissertation

Abstract


Stability analysis and control subject in deep-seated soft rock roadway is always one of the puzzles in underground engineering field at home and abroad. Since the new century, With reducing of shallow mineral resources, exploit depth increasing year by year. Deep-seated exploit faces relatively complicated geological environment. Burst casualty and heavy accidents are more frequent happened by some uncertainty, work environment is more formidable, additionally cost of production is rising rapidly, which challenge the supporting engineering in the deep-seated resoure exploit. Therefore, combining theoretical innovation and engineering practice to form the new deep soft rock supporting system theory is very important. It is very important and meaningful to study proper supporting technique in deep-seated soft rock roadway.This paper mainly studied the existed Problem in chamber, intersection, pump room, and returnaircourse of supporting structure in Zhaolou mine, which is deeper than one thousand meters and through mineral component analysis and physical property test, ground stress test, loose cricle text, numerical simulation analysis and so on to design proper supporting structure and parameters. With grouting-bolting as the kernel, pre-stressed anchor rope and anchor as the auxiliary structure, the three-bolting combined supporting system combining pressure-relief technology of roof control and laneway floor heave control technology solved the supporting stability problem in deep-seated soft rock roadway. After supporting pressure monitoring data proved the stability control technology of success. This paper summarizes the mechanics characteristic of deep-seated soft rock, analysis the failure form and failure mechanism of surrounding rock. Propose the bearing mechanism of grouting-bolting supporting structure, pre-stressed anchor rope and anchor, show laneway floor heave control technology. According to elastic-plastic properties of the complex surrounding rock structure, using large loose circle theory combined bolting system reveals development regularity of surrounding rock plastic zone, propose a new expoit method of soft rock roadway.This paper used th efinite-difference program FLAC3D combining the Finite element program ANSYS to simulates upporting methods in the 4# Intersection, Evaluated the various plans, including the rheologic change after exeavation of 4# Intersection, the stress cases of supporting rock after plans, the changes of elastic-plastic areas and so on, especially selection of the best supporting period of time. Based on four kinds of supporting plan effect, Verify the effects of three-bolting combined supporting system combining pressure-relief technology of roof control and laneway floor heave control technology in stability comprehensive control of deep-seated soft roadway.

Related Dissertations

  1. The Setting Bases of Working Pressure in LNG Systems and Orthogonal Experiment Design of Heat Exchangers,TQ051.5
  2. The Air Linear Motion Reference Design Based on Multi-Throttle,TG83
  3. Study on Springback of High-Strength Steel Stamping,TG386
  4. Numerical Simulation and Experiment on Hydroforming of Cups with Controllable Radial Pressure,TG386
  5. Research on Technology and Mechanism of Joining Cemented Carbide to Carbon Steel,TG454
  6. Global Stability of Telescopic Boom with Impact of Lap between Booms and Friction,TH211.6
  7. Aerodynamic Performance Analysis of Low Pressure Turbine at Low Reynolds Numbers,V231.3
  8. Numerical Simulation of Film Cooling in Turbine Cascade with Non-Axisymmetric Endwall Method,V231.3
  9. High Speed Aerodynamic Convection and Coupled Heat Transfer of Complicated Bodies,V215.4
  10. The Analysis on Characteris of Vibration Source about Vertical Vibration of Surrounding Environment Induced by Rail Transit,U211.3
  11. Research on Automatic Detection Algorithm for Substructure Distress of Highway Pavement Based on SVM,U418.6
  12. Study on the Heat Transfer Characteristics of Particle Cluster in Circulating Fluidized Bed,TK124
  13. Numerical Simulation of SNCR Process of a 600MW Utility Boiler,TK222
  14. Numerical Simulation of Biomass Direct Reburning,TK16
  15. Numerical Simulation on Pulverized Coal Combustion Process in a 670T/H Tangential Firing Furnace,TK224.11
  16. Numerical Simulation on the Combustion Process in the Furnace of a 1000MW Lignite-Fired USC Boiler,TK224.11
  17. Study on Gas-Solid Two-Phase Flow in Spouted Beds,TK173
  18. Experimental Study and Numerical Simulation on Aerodynamic Field of Tangential Bias Swirl Burner,TK223.23
  19. Characteristic Study of Combustion in Central Reverse Flame Chamber,TK223.21
  20. Numerical Simulation and Contrastive Analysis of Labyrinth Seals and Leaf Seals,TK263.2
  21. Research on Autamatic Music Structrue Analysis,TN912.3

CLC: > Industrial Technology > Mining Engineering > Mine the pressure and support > Mine support equipment > Roadway support
© 2012 www.DissertationTopic.Net  Mobile