Dissertation > Excellent graduate degree dissertation topics show

Bodywork Design and Performance Research of Hydraulic Driving System for Conveying Vehicle of Hydraulic Support of Mining

Author: YuZhenTao
Tutor: YangQianMing
School: Shandong University of Science and Technology
Course: Fluid Machinery and Engineering
Keywords: heavy transport vehicle hydraulic drive synchronous control PID simulation analysis
CLC: TD355.4
Type: Master's thesis
Year: 2010
Downloads: 142
Quote: 0
Read: Download Dissertation

Abstract


The Conveying of the hydraulic support at fully mechanized coal face is one of important components of the comprehensive mining mechanized technology. The actual application level of efficiently hydraulic support transportation technology and equipment of is lower in our country, so the developing of the highly mechanization of assistant transportation equipment is the important content and basic guarantee of the high yield and efficiency of the mine building. Based on the research of a lot of technical literature of China and foreign countries and analysis of the domestic and foreign development trend of hydraulic support vehicle market, the scheme of structure design and hydraulic drive for the vehicle have been bring forward in this paper, which special used for the installation and remove of the hydraulic support, according to the craft requirement of installation and remove of hydraulic support for coal mine. The disquisition is originated from engineering practice. The bodywork and hydraulic drive system have been designed at the early stages of the disquisition. The following specific research work has been accomplished.1. The vehicle structure scheme has been bring forward and the vehicle structure characteristics as well as the installation and remove of the support been analyzed detailed through survey research on actual working face of mine and base on analysis of work requirement and stability for the vehicle. Based on many advantages and extensive application of the hydraulic transmission technology, the volumetric speed control circuit of the electro-hydraulic proportional variable pump-motor is chosen for walking hydraulic drive system. To ensure two walking wheels keeping synchronization and preventing affect from each other, the double pump-double motor driving circuit consisted of independence driving system is adopted. The key technology of the electro-hydraulic proportional control of how to keep the speed synchronous of the two walking rounds and the speed sensor are lucubrated.2. To the study the character of pump control motor system the dynamic equations are established and the transfer function diagram of pump control motor hydraulic loop is obtained firstly according to the control diagram and the analysis of each link of system respectively. The mathematics block diagram has been reasonable simplified and then the transfer function of system is obtained. The transfer function diagram of the hydraulic synchronous control system of walking mechanism has been got on the basis.3. The original parameters of the pump control motor system are confirmed by referring to the product sample and corresponding calculation. The stability of pump control motor hydraulic system is analyzed by drawing Bode chart of the system and the system performance has been proofread. The PID control technology and the principal and subordinate control mode have been adopted and the double motors walking hydraulic system have been simulated by the Simulink module. The results of simulation show that the system get better synchronization precise, which proved that it is accurately that the principal and subordinate control mode and the PID control strategy have been adopted in the system.

Related Dissertations

  1. Single Neuron PID Control for Electro-Hydraulic Servo Unit of Ship Rudder,U666.152
  2. Simulation Analysis on Temperature Stress of RCC Arch Dam and Its Construction Joints Design Research,TV642.2
  3. Design of Control System for Laser Beam Steering Device,TM301.2
  4. Research and Design for the Laser’s Power Control System of Laser Direct Writing,TN249
  5. Research on Temprature Controling Technology of Laser Diode with Thermoelectric Cooler,TN248.4
  6. Research on Ducted Fan Unmanned Vehicle Autonomous Modeling and Control Strategies,V249.122
  7. Research on Temperature Control System for Laser Diode,TP273
  8. Research on the Control and Remedy of Nanopositioning Stage Drived by Piezo Material Lead Zirconate Titanate,TP273
  9. Design and Study of Temperature Chamber Control System in Servo Table,TP273
  10. Design the Control System of Ocean Wave’s Simulation Table Based on Theory of Fuzzy Turning PID,TP273.4
  11. Study of Synchronous Generator Excitation Control Based on Neural Network Identification,TM31
  12. Injection Process Analysis and Optimized Deign of MP4 Product Based on the Moldflow Software,TQ320.662
  13. Medium Density Fiberboard Drying System and PLC Control System Design,TP273
  14. Application of FPGA in Low SVG,TN791
  15. Design and Optimization Control of the Electroslag Furnace Atomization Automatic Control System,TP273
  16. The Application of Siemens S7-300 PLC to Control System of Process (Laboratory Tank Level),TP273.5
  17. The Design of Process Control System of Acetylene Production Plant Based on Fuzzy Control,TP273
  18. Study on Industrial Boiler Water Level Control System,TP273
  19. The Research of Mobile Machine Vision Navigation and Obstacle Avoidance System,TP242
  20. The Design and Implementation of Control System for Wire-steel Heat Treatment Direct-fired Furnace,TP273
  21. Research and Design of Optimized Fractional-Order PID Controller,TP13

CLC: > Industrial Technology > Mining Engineering > Mine the pressure and support > Mine support equipment > Mining face support > Hydraulic support and its control
© 2012 www.DissertationTopic.Net  Mobile